Typewriter Basics: Carriage Locks by [[Sarah Everett]] of [[Just My Typewriter]]

Sarah describes having a common spacebar issue when repairing a typewriter, bending the spacebar down which causes the machine not to work/advance as a result when it's put back into the typewriter shell.

Sarah also shows some type bar benders, but doesn't demonstrate how she (or her father) used them to do the repair.

ROYAL KMM Replacing Type Bar Link Remove Arm Repaired Typewriter by [[Phoenix Typewriter]]

This is roughly what I expected to be the case. I've got to shift the fulcrum pivot wire so I can reattach my Q and @ on a Royal KMG.

Roughly similar to Gerren's video on swapping out typefaces, but with a slightly different technique for speed of doing that. See: https://hypothes.is/a/I_-9rBV2Ee-eMotzy9_Z-Q

How To Guide- Swapping Type Bars on a Manual Typewriter -Full tips and tricks by [[The HotRod Typewriter Co.]]

Type bar bender<br /> https://www.rrtypewritermart.co.in/product/29583290/Type-Bar-Bender

A tool with degree measurements for bending typebars for placement into a basket. Could be used for bending bars for swapping QWERTY to QWERTZ.

Watch Phoenix Typewriter in Remington Quiet-Riter Typewriter, Skipping Letters, Adjust Escapement, Type Bar Trip

Typewriter Cleaning and Repair Basics #2 Type Bars, Case, and Crinkle Finish

https://www.youtube.com/watch?v=82O_iUAI5og

Segment comb cleaning - isopropyl alcohol (gentler solvent) - odorless mineral spirits - Lacquer thinner (maybe a bit too aggressive) - naphtha (lighter fluid) take care for flammability and ventilation

Work solvent into bearing between type bar and segment comb. To dry things out one can used compressed air when done or just air dry.

If sticking keys not due to being gummed up, bend portions slightly for better alighment.

Do not lubricate the segment comb.

Only lubricate the carriage rails when necessary.

Exterior cleaning

Brass bristle or nylon bristle brushes (toothbrushes) can be used to clean the exterior of the typewriter and/or cases with mild detergents or other solvents. Depending on the finish, try the brush and solvent on a small portion to determine colorfastness and potential scratching first.