Oligonucleotides used in this study were chemically synthesized by Sigma-Genosys (The Woodlands, TX, U.S.A.).

Oligonucleotides

DTT. Then contents were then mixed and 1μl (200 units) of M-MLV was added. The mixture was then incubated at 37°C for 50 minutes. The reaction was stopped by incubating the mixture at 70°C for 15 minutes. The cDNA thus prepared was then used as a template for PCR. The expression of the investigated genes was determined by normalizing their expression against the expression of actin or GAPDH gene

Semi-quantitative RT-PCR

μg of total RNA was reverse-transcribed using poly-T oligonucleotide and M-MLV reverse transcriptase (Invitrogen) according to manufacturer’s protocol. Briefly, a 20μl reaction volume was made for 1μg of RNA. In a microcentrifuge tube, 1μl oligo (dT)(500μg/ml) , 1μg total RNA, 1μl 10mM dNTP mix and sterile water was added to afinal volume of 13μl. The mixture was then incubated at 65°C for 5 minutes ad quickly chilled on ice. To this mixture were added 4μl of 5X first strand buffer and 2μl of 0.1M

Activation of H50 protein chip array

b. 5 μl of ACN + TFA (25% ACN in PBS + 0.1% TFA) was added to the spot surface and removed after 30 sec. c. 5 μl of cell lysate sample was then spotted on the chip and kept in a humid chamber for 30 min. d. Stringent washes were given by spotting 5 μl water on the spot surface for 30 sec and removing using Whatman filter paper strips. This was followed with a 25% ACN wash or three washes with 25% ACN or 50% CAN or 75% ACN. e. Washing was performed by spotting 5 μl of water for 30 sec followed by removal using Whatman filter paper strips. f. Dried chip at room temperature. g. 1-2 μl of SAP matrix (5 mg of matrix + 200 μl ACN + 200 μl of 1% TFA) was then spotted on the chip surface and allowed to dry. h. The chip was then placed in the SELDI machine

5 μl of water was added to each spot on the chip and removed after 30 sec using Whatman filter paper strips. Care was taken not to touch the spot surface. This step was repeated once

Typically, 100-200 ng of DNA was used in each ligation reaction. The ratio of vector to insert was maintained between 1:3 and 1:5. The reactions were usually done in a 10 μl volume containing ligation buffer (provided by the manufacturer) and 0.05 Weiss units of T4 DNA ligase, at 16°C for 12-16 hr

Ligation of DNA

NP-40 1% Tris 50 mM Sodiun deoxycholate 0.5% SDS 0.1% pH adjusted to 8.0 Running buffer for Western blotting Glycine 14.4g/l Tris base 3.05g/l SDS 1.0g/l Transfer buffer for western blotting Glycine 14.4g/l Tris base 3.03g/l The above salts were dissolved in 800ml of miliQ water and 200ml of methanol was then added. The buffer was chilled before use. PBST for Western blot 10X PBS (1000 ml) Sodium chloride 80 g Potassium chloride 2 g Disodium hydrogen phosphate 14.1 g (Na2HPO4) Potassium dihydrogen phosphate 2.49 g (KH2PO4) 1 l of 1X PBS + 1 ml of Tween-20

TBF-I buffer (200ml) Potassium acetate 0.588 g Calcium chloride 0.249 g Manganese chloride 1.98 g Rubidium chloride 2.418 g 15% Glycerol 30 ml pH adjusted to 5.8 with 1M acetic acid TBF-II buffer (100 ml) MOPS 0.209 g Calcium chloride 1.102 g Rubidium chloride 0.120 g 15% Glycerol 15 ml pH adjusted to 6.5 with 1M potassium hydroxide Acrylamide solution (30%) Acrylamide 29 g Bis-acrylamide 1 g H2O 100 ml Non denaturing polyacrylamide gel (12%) 30% acrylamide 38.6 ml H2O 40.6 ml TBE 20 ml 10% APS 0.7 ml RIPA buffer (Radio Immuno Precipitation Assay buffer): RIPA buffer for bacterial cell lysis Sodium chloride 150 mM

Water to 1000 ml MacConkey lactose agar: MacConkey Agar Base (Difco) 51.5 g Lactose 1% Water to 1000 ml Maloy agar: Tryptone 5 g Yeast extract 5 g NaCl 10 g NaH2PO4 10 g Chlorotetracycline (12.5 mg/ml) 4 ml Water 1000 ml Bacto-agar 15 g After autoclaving, the following solutions were added, ZnCl2 (20 mM) 5 ml Quinaldic acid (10 mg/ml) 10 ml Citrate buffer: (0.1 M; pH 5.5) Citric acid (0.1 M) 4.7 volumes Sodium citrate (0.1 M) 15.4 volumes TBE and TAE buffers: TBE: 90 mM Tris-borate, 2 mM EDTA (pH 8.0) and TAE: 40 mM Tris-acetate, 2 mM EDTA (pH 8.0) were used as standard electrophoresis buffers. TBE and TAE were prepared as 10X and 50X concentrated stock solutions, respectively, and used at 1X concentration

cto-agar 15 g LBON agar: LBON medium1000 mlBacto-agar 15 gLB soft agar: LB medium 100 ml Bacto-agar 0.6 gK-Medium: KH2PO4 1.0 mM FeSO4 0.5 mg/l (NH4)2SO4 1.5 mM MgCl2 0.08 mM Casamino acids 5 g/l Thiamine 2 mg/l pH was adjusted to 7.0 with Tris free base. K-medium is low osmolarity (70 mOsm) medium (Kennedy, 1982). Z broth: LB medium 100 ml CaCl2 (0.5 M) 0.5 ml MacConkey agar: MacConkey Agar (Difco) 51.5 g Water to 1000 ml MacConkey galactose agar: MacConkey Agar Base (Difco) 51.5 g Galactose 1%

Glucose/Glycerol-minimal A 19 amino acid medium: This medium is essentially the same as glucose/glycerol-minimal A medium described above except that all the 19 amino acids (except tryptophan) were added after autoclaving in a final concentration of 40 μg/ml from autoclaved 4mg/ml amino acid stock solutions. Minimal agar: Contained 1.5% Bacto-agar (Difco) in minimal A Medium. The plates were poured after mixing double strength minimal A medium with 4% agar (in water) that had been autoclaved separately. Wherever required, to test polaity relif at lacZ(am) or trpE(fs), meliobose (0.2%) was replaced for glucose and anthranilate at 100 μg/ml (4 mg/ml stock prepared in DMF) was replaced for tryptophan respectively. LB medium: Tryptone 10 g Yeast extract 5 g NaCl 10 g Water to 1000 ml pH adjusted to 7.0 - 7.2 with 1 N NaOH. LBON medium: Tryptone 10 g Yeast extract 5 g Water to 1000 ml pH adjusted to 7.0 - 7.2 with 1 N NaOH LB agar: LB medium 1000 ml

All the media and buffers were sterilized by autoclaving for 15 minutes at 121°C. Media and buffers used in this study are described below. Glucose/Glycerol-minimal A medium: K2HPO4 10.5 g KH2PO4 4.5 g (NH4)2SO4 1 g Sodium citrate, 2H2O 0.5 g Water to 1000 ml After autoclaving the following solutions were added. MgSO4 (1 M) 1 ml Glucose (20%) 10 ml Or Glycerol (80%) 5ml Vitamin B1 (1%) 0.1 ml Amino acids and bases, when required, were added to a final concentration of 40 μg/ml. When growth on other carbon sources was to be tested, glucose was substituted by the appropriate sugar at 0.2%; when used as carbon source, the final concentration of Casamino acids was 0.5%

Media and buffers

s promastigotes develop from procyclic to metacyclic forms, the surface LPG undergoes changes in size and carbohydrate structure. Procyclic promastigotes express a smaller LPG capable of binding to the sand-fly midgut, while metacyclic promastigotes express a larger LPG typically accompanied by changes in the terminal sugar of some of these units (McConville et al., 1992). The lectin peanut agglutinin (PNA) binds to terminal galactose of procyclic LPG but does not bind its metacyclic LPG counterparts which terminate in arabinose. This principle is used in assessing the number of metacyclics in a culture (Sacks et al., 1985). Briefly, after appropriate incubation, 107 cells were harvested and washed once with PBS followed by resuspension in 1mL PBS. PNA (1mg/ mL, prepared in PBS) was added to the cells at a final concentration of 10011g/ mL and incubated at 23°C for 1hr followed by incubation on a shaker incubator set at 40rpm for 5 min. The clumps formed were then pelleted at 100 x g for 3 min at RT. From the supernatant, 1011L was withdrawn for counting on a Neubauer's chamber to get the number of metacyclics per 107 cells

Assay for measuring the number of metacyclic parasites (Peanut Agglutination Assay)

RNA was isolated as described above. 3'RACE was carried out using a kit procured from Invitrogen (Carlsbad, CA) according to manufacturer's instructions. Briefly, 4~-tg of RNA was taken and e-DNA prepared using adaptor primer (AP) provided in the kit. This e-DNA was then used as template in a PCR reaction using a gene specific forward primer (Ld30RA3 and Ld34RA1), and the abridged universal amplification primer (AUAP) that is homologous to the adaptor primer as the reverse primer. The PCR product generated was then sequenced using T7 an SP6 primers after cloning into pGEM-TEasy vector as described below

Rapid Amplification of e-DNA ends (RACE)

x g for 10 min at RT. The supernatant was centrifuged at 1258 x g for 10 min at RT. The pellet obtained was washed 2X at 4°C in half the culture volume of Cytomix buffer (120 mM KCl, 0.15 mM CaCh, 10 mM K2HP04, 25 mM HEPES, 2 mM EDTA, and 2mM MgCh; pH 7.6) and then resuspended in chilled cytomix buffer at a density of 2 X 108 cells/mL. Electroporation: For a single electroporation, 2011g of plasmid (in water or 10mM Tris pH 8.0) for episomal expression and 5Jlg of plasmid for integration events, was added to a pre-chilled cuvette ( 4mm, BTX, San Diego, CA). 500J1L of chilled cell suspension (108 cells) processed as above was transferred to the cuvette and mixed with DNA by gently tapping and incubated on ice for 10 min. The cells were electroporated twice at 25 J.IF, 1500 V (3.75 kV /em), pausing 10 s between pulses (Robinson and Beverley, 2003) in a BioRad Gene Pulser X Cell electroporator. The cell suspension was then transferred to 5mL of mDMEM containing 20% FBS and allowed to recover for ~18hrs before antibiotic selection commenced. Selection of transformants: Selection of parasites containing recombinant DNA was carried out initially in liquid medium followed by culture with agar. After the rest period, the electroporated cells were exposed to 1011g/ mL of G418 or Hygromycin B for 48 hrs with antibiotic being increased to 2011g/ mL and 50Jlg/ mL at 48 hr. intervals. Part of the cells were then plated onto freshly poured mDMEM plates (1X mDMEM, 2% agar containing 100]lg/ mL, 500]lg/ mL or 1mg/ mL G418; or 50]lg/ mL Hygromycin B) and incubated at 23°C for 7-14 days. Individual colonies obtained on plates were cultured in liquid medium and screened appropriately. Limiting dilution was used to isolate single clones.

Preparation of Leishmania culture for electroporation: An early log phase culture of Leishmania donovani was harvested and dead cells pelleted at 129

Foreign DNA can be introduced into Leishmania cultures using electroporation. Transfected circular plasmids are maintained as episomes, while linear DNA can integrate into the genome. Preparation of DNA : DNA construct to be electroporated was generated using standard molecular biological techniques as described later. The plasmid DNA was prepared from E. coli DH5-a or XL-1 Blue cells using the EndoFree MaxiPrep kit from Qiagen (Hilden, Germany) according to manufacturer's protocol. Briefly, 200mL of overnight culture was pelleted at 6000 x gat 4°C for 15 min. The pellet was resuspended in 10mL Buffer P1 (50mM Tris-Cl, pH 8.0, 10mM EDTA, 100p.g/mL RNaseA). To this 10mL Buffer P2 (200mM NaOH, 1 %w /v SDS) was added and mixed thoroughly by vigorously inverting 4-6 times and an incubated at RT for 5 mins. Now 10mL of chilled Buffer 3 (3.0M Potassium acetate, pH 5.5) was added and mixed thoroughly by vigorously inverting 4-6 times and then the lysate was poured into a QIAfilter catridge and incubated at RT for 10 min. Subsequently a plunger was used to filter the cell lysate into a 50mL tube to which 2.5mL Buffer ER was added and inverted 10 times to mix. This was incubated on ice for 30 min. In the meantime, a QIAGEN-tip was equilibrated with 10mL Buffer QBT (750mM NaCl, 50mM MOPS, pH 7.0, 15%v /v isopropanol and 0.15%v jv Triton X-100). After incubation, the filtrate was allowed to enter the tip resin by gravity. This was followed by two washes with 30mL of Buffer QC (1.0M Nacl, 50mM Tris-Cl, and pH 7.0 and 15% v /v Isopropanol). DNA was eluted with 15mL Buffer QN (1.6M NaCl, 50mM MOPS, pH 7.0 and 15%v /v isopropanol) and precipitated by adding 10.5 mL (0.7 volumes) isopropanol at RT and centrifugation at 15,000 x g for 30 min at 4°C. The pellet was washed with 5mL endotoxin-free 70% ethanol at RT and centrifuged at 15000 x g for 10 min. The pellet obtained was air dried for 5-10 min and redissolved in a suitable volume of endotoxin-free buffer TE (10mM Tris-Cl, pH 8.0, 1mM EDTA). The concentration of the obtained DNA was estimated by measuring the absorbance at 260nm (A260) and using the known formula: DNA concentration = A260 X SOX dilution factor.

Transfection of Leishmania donovani promastigotes

Primer extension analysis to map thetranscription start site was carried out as describedby Conway et al. (1987) and Rajkumari et al. (1997). 20 pmolof primer was labelled at its 5′-end with 32P-γ-ATP as described above. 106cpm equivalent of labelled primer was mixed with 10μg of total cellular RNA. Sodium acetate pH-5.5 was added to a final concentration of0.3 M and the nucleic acids were precipitated with ethanol, washed with 70% alcohol,air-dried and dissolved in hybridization buffer (9 mM Tris-Cl, pH-8 and 0.35 mMEDTA) and incubated overnight at 43ºC for annealing. Reverse transcriptase reactionwas performed by the addition of 5 mM MgCl2, 1 mMdNTP’s, 1 X RT buffer, highconcentration (10 units) of Superscript III Reverse Transcriptase (Invitrogen) to the mixture of annealedlabelled primer and RNA. The reaction was incubated at 43ºC for 1-hr following whichthe nucleic acids were precipitated with absolute alcohol and 0.3 M CH3COONa, pH-5.5. The precipitate was air dried and dissolved in water and gel-loading dye (95%formamide, 20 mM EDTA, 0.05% each of xylene cyanol and bromophenol blue) wasadded. The samples were heated at 90ºC for 2-min before loading on a 6% denaturingpolyacrylamide gel for electrophoreticresolution alongside a sequencingladder

Primer extension analysis

PCR products were purified using the PCR Purification Kit (Qiagen) as per the manufacturer's instructions

Purification of PCR products

A differential gene expression microarray with respect to argP was performed by Genotypic Technology Pvt.Ltd., Bengaluru. The experiment was performed on an oligonucleotide microarray having 10828 probes for coding region(on average three probes were designed for each 4294 coding regions) and 4380 probes for non-coding region (on average two probes were designed for 2240 non-coding regions). The RNA was labelled using Cy3 and single channel detection was used. Data was analysed using GeneSpring GX Version 7.3

Microarray details

Antibiotics were used at the following final concentrations in various media as given inTable 2.4.Table 2.4Concentrations of antibiotics (μg/ml)

Antibiotics

Intracellular reactive oxygen species (ROS)levels in yeast cells weredetermined usingfluorescent probe 2',7'-dichlorofluorescein diacetate (DCFH-DA; Sigma# D6883). Cellular esterasesremove the diacetate groups ofthe DCFH-DAand produceDCFHwhich getsreadily oxidized to highly fluorescent product 2′,7′-dichlorofluorescein (DCF) by intracellular ROS. The fluorescent intensity of DCF corresponds to the amount ofintracellular ROSpresent in the cell.Cells grown under different environmental conditions were harvested,washed once with tissue-culture grade phosphate-buffered saline (PBS) and resuspendedin PBS to the final cell density of 1 OD. Freshly-prepared DCFH-DA (0.01M stock in DMSO) was added to the cell suspension toafinal concentration of 100 μM. Cell suspension was mixed and incubated at 30 ̊C for 30 min. After incubation,cells were washed 2-3 times with 1 ml PBS and then resuspendedin 200 μlPBS. Fluorescence intensity values wererecorded usingspectrofluorophotometer (Varioskan flash-3001, Thermo Scientific) with excitation and emission at 488and 530 nm,respectively.Fluorescenceintensityvalues obtained from probe-loaded cells were subtracted from the fluorescence intensity values obtainedfrom cells-alone samplesto remove background fluorescence

Determination of intracellular reactive oxygen species (ROS)levels

C. glabrataTn7insertion mutantlibrary was screened for reduced growth in YNB-pH 2.0 medium. Thismutant library,composed of 9,134 Tn7insertion mutants, isarrayed in 96-well microtitre plates(Castaño et al.,2003). 2 μlof each mutant strain was inoculated in 120μl YNB medium and grown overnight at 30 ̊C in an incubator with constant shakingat 120 rpm. Overnight grown cultures were 120-folddiluted with 1X PBS in a 96 well block and transferred, using a 96-well pin replicator, to YNB and YNB-pH 2.0 medium. Plates were incubated at 30°C and mutant phenotypes were recorded after 3-4days.

Screening of C. glabrataTn7insertion mutants

suspension was kept on ice for 10 min and 50 μl volume was aliquoted to chilled sterile microcentrifuge tubes. Cellswere immediately snap-frozen in liquid nitrogen and stored at -80 ̊C

A single colony of E.coli DH5-α strain was inoculated in 10ml LB medium and incubated at37 ̊C for overnight. 4 ml of thisovernight culture was inoculated in 2 lt SOB medium and incubated at 18 ̊C till theOD600reaches to 0.5. Cells were harvested by centrifugation at 2,500 g for 10 min at 4 ̊C and washed gently in 80 ml ice-cold Inoue transformation buffer. Cells were collectedby centrifugation at 2,500 g for 10 min at 4 ̊C and gently resuspended in 20 mlice-cold Inoue transformation buffer. To this cell suspension, 1.5 ml sterile DMSO was added and swirled gently. Cell

E. coli DH5α ultra-competent cells preparation

Colony blot assay was performed to analyse secretion of carboxypeptidase Y(CPY)as described previously (Roberts et al., 1991). Single colony of a C. glabratastrain was inoculated in YPD medium andculture was grown till stationary phase. 0.1 OD600equivalent cellsfrom this culture were spotted on CAA medium,overlaidwith a nitrocellulose membrane and plate was incubated at30 ̊C for 18-20 h.Afterincubation, nitrocellulose membranewas washed with water to remove cells and membrane-bound CPYwas detected by immunoblotting with polyclonal anti-CPY antibody at a dilution of 1:10,000

Colonyblot assay

Stripping of membranes in buffer containing 0.4 M NaCl yielded slightly better results. Hybond membranes were reused for 5-10 times after stripping

Radiolabeled-bound probes were stripped from the membrane by boiling in 1% SDS containing 0.1X SSC for 15 min. Alternatively, membraneswereincubatedtwicein stripping solution (0.4 M NaOH)at 45°C for 30 minto remove the bound probes

Stripping of probes from hybridized membranes

24 h post infection, THP-1 macrophages were washed thrice with PBS, lysed in water and recovered yeast cells were used to infect THP-1 cells at a MOIof 1:10. Three rounds of macrophage infection foreach mutant pool were carried out to enrich for the desired mutants in the final population. The lysate of 3rdround infection was inoculated in YPD medium for overnight (output). Cells were harvested, genomic DNA isolated from each input and output cell pellet andunique signature tags were PCR-amplified with P32-labeledα-dCTP using primers complementary to theinvariant region flanking each unique tag sequence. LabeledPCR products were denatured at 95°C for 10 min, chilled on ice and were hybridized tonylon membranescarrying immobilized plasmid DNA containing 96 unique tagsfor 14-16 h at 42°C.Membranes were washed twicewith 0.1X SSC bufferand exposed to phosphorimager screen for 2-4 h. Radioactive counts for each spot were quantified using Image Quant and Fuji Multi Gauge V3.0 software. Relative percentage intensity for individual spot was calculated with respect to allspots present oneach hybridizedmembrane

YPD-grown cultures (0.05 OD600) of each mutant pool (96 mutants, each carrying a unique signature tag) were either inoculated in YPD medium for overnight (input) or used to infect differentiated THP-1 cells (1X106). After 2 h incubation, non-cell-associated yeastcellswere removed by washing THP-1 cellsthricewith PBS. At

Screening of C. glabrataTn7insertion mutant library

THP-1 cells were seeded ina 24-well tissue culture plate to a celldensity of 1 million cells per well,treated with PMA and were infected with yeast cells to a MOIof 10:1. Two hours post infection, cells were washed thrice with PBS and medium was replacedwith fresh prewarmed RPMI medium.Plates wereincubatedat 37ºCfor 24 h. Supernatants were collected,centrifuged at 3,000 rpm for 5 minto get rid of particulate matter,if any, andwerestored at -20°C until use. Estimation of different cytokines wasperformed using BD OptEA ELISA kits as per the supplier’s instructions

Cytokines measurement

Spheroplast resuspension buffer0.1M KCl15 mM HEPES (pH 7.5)3 mM Ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid(EGTA)10% GlycerolPhosphatidylinositol sonication buffer10 mM HEPES (pH 7.5)1 mM EGTA PI3-kinase reaction buffer40 mM HEPES (pH 7.5)20 mM MgCl280 μM ATP5 μCi γ-P32ATPDeveloping solution for thin layer chromatography(120.2 ml)Chloroform –60 mlMethanol –47 mlAmmonia –4.4 mlWater –8.8 ml

Reagents for PI3-kinase assay

SDS-loading buffer was prepared as a 4X stock solutionin H2Oand used at a 1X concentration.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSRunning buffer was preparedas a 10X stock solution and diluted to 1X concentration before use.Buffers for Western blotanalysisTransfer buffer (10X stock solution)0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSTransfer buffer was prepared as a 10X stock solution and diluted to 1X concentration.1X Transfer buffer (1 litre)200 ml of methanol100 ml of 10X transfer buffer700 ml of waterTris-BufferSaline (TBS)25 mM Tris150 mM NaClpH was adjusted to 7.4 with HCl.TBS buffer was prepared asa10X stock solution and diluted to 1X concentration.Blocking and wash buffers (PBS-T and TBS-T)5% Fat-free milk0.1% Tween-20Volume was made to 100 ml with 1X TBS

1 mM sodium orthovanadate1 X protease inhibitor cocktail SDS-PAGE30% Acrylamide solution29 g Acrylamide1 gBis-acrylamideDissolved in 100 ml H2O.10% Sodium Dodecyl Sulfate (SDS)10 g SDS in 100 ml H2OResolving gel mix (12%) (20 ml)6.6 ml H2O8 ml 30% acrylamide:bisacrylamide (29:1) mix5 ml 1.5 M Tris-HCl (pH 8.8)200 μl 10% SDS200 μl 10% Ammonium persulfate(APS)8 μl N,N,N′,N′-Tetramethylethylenediamine(TEMED)Stacking gel mix (5%, 6 ml)4.1 ml H2O1 ml 30% acrylamide:bisacrylamide (29:1) mix750 μl 1 M Tris-HCl (pH 6.8)60 μl 10% SDS60 μl 10% APS6 μl TEMEDSDS loading buffer130 mM Tris-HCl (pH 8.0)20% (v/v) Glycerol4.6% (w/v) SDS0.02% Bromophenol Blue2% DTT

Whole cell lysis buffer (Homogenizing buffer)50 mM Tris-HCl (pH 7.5)2 mM EDTA10 mM sodium fluoride

Buffers for protein extraction and analysis by SDS-PAGE (sodium dodecyl sulphate-polyacrylamide gel electrophoresis)

150 mM NaCl1% Triton-X1% SDSBuffer B50 mM Tris-HCl (pH 7.5)10 mM EDTA1.1 MSorbitol50 mM β-mercaptoethanol (To be added just before use)Buffer C100 mM Tris-HCl (pH 7.5)10 mM EDTA10% SDSAE buffer3 M Sodium acetate(pH 5.3)0.5 M EDTA (pH 8.0)Phenol:Chloroform:Isoamyl alcohol (25:24:1) solution25 ml Tris-equilibrated Phenol24 ml Chloroform1 ml Isoamyl alcholDNA sample loading buffer0.25% Bromophenol blue0.25% Xylene cyanol15% FicollDNA sample loading buffer was prepared in water

Buffer A50 mM Tris-HCl(pH 8)10 mM EDTA

Buffers for extraction and analysis of genomic DNA and RNA

Stripping solutionfor DNA1% SDS0.1% SSCDesired volume was adjusted with sterile water. Alternatively, 0.4 M NaOH was also used to stripthe bound probes fromnylon membranes.HEPES [4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid] buffer1 M HEPESpH was adjusted to 7.5 with NaOH.HEPES was used as a buffering agent for preparing plates of YNB medium of different pH. Buffer was filter-sterilized and stored in an amber-coloured bottle.INOUE transformation buffer10 mM PIPES15 mM CaCl2.2H2O250 mM KCl55 mM MnCl2.4H2OpH was adjusted to 6.7 with 1 N KOH.Yeast transformation reagents1 M Lithium acetate 50% Polyethylene glycol2 mg/ml carrier DNADimethyl sulfoxide (DMSO)Zymolyase cocktail buffer for yeast colony PCR2.5 mg/ml Zymolyase1.2 M SorbitolZymolyase buffer was prepared in 1X PBS

pH was adjusted to 8.5 with glacial acetic acid.TAE buffer was prepared asa50Xstock solution and used at 0.5X concentration.Alkaline denaturing solution for DNAfor membrane preparation0.5 M NaCl0.25 M NaOHVolume was adjusted with sterile water.Denhardt’s solution (50X)1%Ficoll-4001% Polyvinyl pyrollidone1% Bovine serum albuminVolume was adjusted with water and solution was stored at -20°C.Saline Sodium Citrate (SSC) buffer(20X)3.0 M Sodium chloride0.3 M Sodium citrate Volume was adjusted with water and solution was sterilized by autoclaving.Prehybridization Buffer5X SSC5X Denhardt’s solution50% Filtered formamide1% SDSVolume was adjusted with sterile water.Post hybridization wash buffersWash buffer 12X SSC0.1% SDSWash buffer21X SSC0.1% SDS

Phosphate-Buffered Saline (PBS)137 mM NaCl2.7 mM KCl10 mM Na2HPO42 mM KH2PO4pH was adjusted to 7.3 before autoclaving.PBS was prepared as a 10X stock solution and diluted to 1X concentration before autoclaving.Tris-HCl buffer0.5 M Trizma BasepH was adjusted to 7.6 using concentrated HCl.Tris-Cl buffer was prepared as a 10Xstock solution and used at a 1X concentration.Tris-EDTA (TE) buffer10 mM Tris-HCl (pH 8.0)1 mM EDTATris-Acetic acid EDTA (TAE) buffer40 mM Tris base0.5 M EDTA

Common buffers

Buffers and solutions

competent cells pre-inoculum was prepared. A single bacterial colony was picked from LB agar plate that has been incubated for 16-20 hours at 37 °C and inoculated into 3 mlLB medium and incubated overnight at 37 °C temperature with 200 rpm shaking. 1% of this pre-inoculum was sub cultured in 100 ml LB-broth and incubated at 18 °C until OD 600 reached 0.5 -0.6 (approx.). Culture was kept on ice for 10 min. with constant shaking. Cells were pelleted by centrifugation at 2000xg/4°C/8 min. Pellet was resuspended in 40 ml of ice-cold Innoue buffer. Bacterial suspension was kept on ice for 30 min, re-spun at 2000 xg/4°C/8 min. Pellet was resuspended in 8 ml of TB buffer inwhich final concentration of DMSO was 7% and left on ice for 10 min. 100μl aliquots were made and snap frozenin liquid nitrogen and stored at -80 °C

All the salts (10 mM PIPES, 15 mM CaCl2.2H2O, 250 mM KCl,55 mM MnCl2. 2H2O) except MnCl2were dissolved in water and pH was adjusted to 6.7 with 1N KOH. MnCl2was dissolved separately in water. MnCl2was added drop wise while stirring (MnCl2if added directly will give a brown colour to the solution and precipitates;hence it needs to be dissolved separately). Solution was then sterilized by filteringand stored. To prepare

PreparationofUltra competent cells

Equal amount of proteins were loadedon an appropriate percentageof denaturing SDS-PAGE gel. After completion ofthe run, the gel was over laid on a PVDF membranecut to the size of gel and sandwiched between filter paper sheets and kept inthe blotting cassette in the presence of transferbuffer. Finally the cassette was put in themini transblotapparatus and blotting was done for 2-3hours at a constantvoltage of 80Vat 4⁰C. For blocking the nonspecific sitesmembrane was incubated with blocking solution(5% non-fat milk solution in TBST)with gentle shaking for 1 hourat room temperature. Excess milk from the membrane was washedoff with TBST and themembrane was incubatedwith primary antibody diluted in 1XTBST for 3 hours atroom temperature or overnight at 4°C withshaking. After incubation the membrane was washedwith TBST and incubatedwithappropriate secondary antibody (conjugated with horse-radish peroxidase)diluted in5% fat free milk solution (in TBST) for 1hat room temperature.The blotwas later washed thricefor 10min eachwith TBST and processed for the detection of proteinsignal using ECL-prime chemiluminescencedetection reagent followed by detectionof signal either on X-ray filmor in a chemiluminescence detectionsystem(Proteinsimple, California, USA)

Immunoblotting

Binding Buffer (10X)

EMSA Buffer

Nuclear lysis buffer

Polydeoxy (Inosinate-cytidylate) (Poly dI-dC)

For Electrophoretic mobility shift assay (EMSA)

TBST

Dithiothreitol (DTT)ComponentsFinal concentrationFor 5 mlDTT1.0M0.7725gH2Oq.s

Materials and Methods462.2.5 Cell proliferation assayThe method described earlier by Gilliesand co-workerswas slightly modified and followed (Gillies et al.,1986). Briefly, parentaland profilin-stable cells were seeded in triplicates at a density of 20,000 cells per well of a 24-well culture plates. Each day after seeding, cells were washed with PBS and stained with 0.2% crystal violet in 2% ethanol for 15 minutes. Vigorous washing was done with PBS to remove excess dye. Crystal violet dye was then eluted using 1% SDS solution with extensive pipetting and diluted 10 fold. Absorbance of the extracted dye was then determined at 570 nm in a spectrophotometer. Absorbance data based on triplicate set of samples for each experimental condition were then averaged for each time point to generate a growth curve.2.2.6 Preparation of whole cell, cytoplasmic and nuclear lysatesIn order to extract the total cell homogenate, the culture media was removed and cells were washed with ice cold PBS. The cells were then gently scrapped and pelleted by centrifugation at 3000 rpm for 3 minutes at 4°C. The cell extraction buffer was added to the cell pellet and placed on rotor kept in cold room for 30 minutes for cell lysis. Lysed cellswere then centrifuged at 13000 rpm for 10min at 4°C. The supernatant was collected as cellular lysate. Protein concentration was estimated using Bradfordassay, described below.For a typical Western blot assay, 30-70μg of protein was loaded on theSDS-PAGE.For the preparation of cytoplasmic lysate,ice-cold hypotonic cytoplasmic extract buffer was added in the cell pellet andgently mixed with the pipette in a microfuge tube. The cell suspension was incubated on ice for 30 minto allow them to swell.After incubation, freshly prepared 10% NP-40was added andvortexed vigorously for 15 seconds torupture the plasma membrane. The contents were then centrifuged at 13000 rpmfor a minuteat 4°C and supernatant containing the cytoplasmic lysate was transferred to another pre-chilled microfuge tube and stored at –70°C.The pellet was then further processed for extraction of nuclear lysate.For this, ice-cold nuclear extractbuffer was added to the pellet and incubated on ice for 45 min with intermittent vortexingafter every 10 min of incubation. Finally, cell suspension wascentrifuged for 5 min at 14000rpm. The supernatant containing nuclear lysatewas stored at –70°C for further experiment

Preparation of whole cell, cytoplasmic and nuclear lysates

For preparation of Ultra competent cells

Inoue buffer

(f) Running buffer

Yeast weregrown in YPD (Difco) overnight,and sub-cultured at 0.2 OD600. Cells were harvested at 0.6-0.8 OD600. 1 OD600of each culture was used for the labelling. Cells were washed in SC-Metmedium twice, suspended in SC-Metmedium containing 25μCi/mLof 35S Met-Cys and pulsed for 15 min. Cells were washed twice in methionine-free medium and suspended in 300Lof Tris-saline. Cell suspension was counted in a liquid scintillation counter (Perkin Elmer-Tricarb 2900). The cpm values obtained were plotted using GraphPad Prism5

35S-Met uptake assay

0.83mL1.5 M Tris-HCl,pH 6.8 50μL10% SDS 50μL10% Ammonium persulfate (APS)8 μLN,N,N′,N′-Tetramethylethylenediamine (TEMED)Resolving gel mix (12%) (20 ml)6.6 mLH2O 8 mL 30% acrylamide:bisacrylamide (29:1) mix 5 mL1.5 M Tris-HCl,pH 8.8 200 μL10% SDS 200 μL10% Ammonium persulfate (APS)8 μLN,N,N′,N′-Tetramethylethylenediamine (TEMED)

Whole cell lysis buffer for yeast (Homogenizing buffer) 50 mM Tris-HCl,pH 7.52 mM EDTA yeastprotease inhibitor cocktail SDS-PAGE 30% Acrylamide solution 29 g acrylamide 1 g bis-acrylamide dissolved in 100 mLH2O. 10% sodium dodecyl sulfate (SDS) 10 g SDS in 100 mLH2O Stacking gel mix (6%)(5 mL)3.4mLH2O 0.63mL 30% acrylamide:bisacrylamide (29:1) mix

Buffers for SDS-PAGE (sodium dodecyl sulphate-polyacrylamide gel electrophoresis)

20 mM HEPES500 mM NaCl 2 mM EDTA1% Triton-XYeast protease inhibitor cocktail and phosphatase inhibitor cocktail (added fresh to the buffer C)IP7 reaction buffer(10X)250 mM HEPES,pH 7.4500 mM NaCl60 mM MgCl210 mM DTT (1 M stock was made separately, aliquoted into 100 μL and stored at -20oC).10X buffer was made and stored at 4oC. An appropriate amount was added to the reaction mix to get a final concentration of 1X.DTT was added fresh to the reaction buffer just before use

Buffer C

2 mM EDTA5 mM DTT1% Triton-XYeast protease inhibitor cocktail and phosphatase inhibitor cocktail (added fresh to the buffer B)

20 mM HEPES pH 6.8100 mM NaCl

Buffer B

20 mM HEPES pH 6.8100 mM NaCl2 mM EDTA5 mM DTTYeast protease inhibitor cocktail and phosphatase inhibitor cocktail (added fresh to the buffer A)

Buffer A

Buffers for protein purification and IP7reaction

Buffer A1 mM EDTAin HPLC grade water (Fisher Scientific)Buffer B 1 mM EDTA(NH4)2HPO41.3 M, pH 3.8171.6 g of (NH4)2HPO4was dissolved in 750 mL of HPLC grade water. pH was adjusted to 3.8 with 75 mL of H3PO4by continuous stirring and the volume was made upto 1000 mL.Both buffers were filtered througha0.22 μm filter (Millipore) using vacuume filter apparatus (Tarsons) and degassing was performed atleast for 20 min using a vacuume pump

Buffers for IP7 purification

Wash buffer II10 mM Tris-HCI,pH 8.01 mM EDTA250 mM LiCl0.75% NP-400.75% sodium deoxycholateProtease inhibitor cocktailElutionbuffer II50 mM Tris-HCl,pH 8.0 10 mM EDTA 1% SDS

Lysis buffer50 mM HEPES,pH 7.5140 mM NaCl1% Triton X-1000.1 % sodium deoxycholate1 mM EDTAProtease inhibitor cocktail (added fresh)Wash buffer I50 mM HEPES,pH 7.5500 mM NaCl1% Triton X-1000.1 % sodium deoxycholate1 mM EDTAProtease inhibitor cocktail

Buffers for chromatin immunoprecipitation

Volume was adjusted with water to 1 L and solution was sterilized by autoclaving.Pre-hybridization/hybridization buffer (Modified Church and Gilbert buffer)0.5 M phosphate buffer (134g of Na2HPO4.7H2O,4 mL of 85%H3PO4), pH7.27% (w/v) SDS10 mM EDTA Volume was adjusted to 1 L with DEPC treated sterile water. Buffer was aliquoted into 50 mL RNase free conical tubes (Corning) and stored in -20oC.Post hybridization wash buffersWash buffer 1 2X SSC 0.1% SDS Wash buffer 2 1X SSC 0.1% SDSWash buffer 3 0.5X SSC0.1% SDSBuffers were prepared with sterile DEPC treated water

TMN buffer10mM Tris-HCl, pH 7.45 mM MgCl2100 mM NaCl Permeabilization buffer950 μLof coldwater50 μLof 10% (wt/vol)sodium N-lauroyl sarcosineTranscription assay buffer(100 μL)50mM Tris-HCl, pH 7.4100mMKCl5mM MgCl21mM MnCl22 mM dithiothreitol 0.5mM ATP 0.25 mM GTP0.25mM CTP10mM phosphocreatine2.4 units creatine phosphokinase100μCi [α-32P] UTP (3,000Ci/mmol)Alkaline denaturing solution for DNA for membrane preparation0.5 M NaCl 0.25 M NaOH Volume was adjusted to 20 mLwith sterile water. Saline Sodium Citrate (SSC) buffer (20X) 3.0 M Sodium chloride 0.3 M Sodium citrate

Buffers fortranscription run on analysis

50 mM Tris-HCl,pH7.450 mM NH4Cl12 mM MgCl21 mM DTT0.1%DEPC37% sucrose solution

100mM NaCl30mM MgCl250μg/mLcycloheximide 200μg/mL heparin All the components were made in DEPC treated water.Gradient buffer10% sucrose gradient buffer50 mM Tris-HCl,pH7.450 mM NH4Cl12 mM MgCl21 mM DTT0.1%DEPC10% sucrose solutionTo analyse individual ribosome subunits, MgCl2 was eliminated from the gradient buffer.30% sucrose gradient buffer50 mM Tris-HCl,pH7.450 mM NH4Cl12 mM MgCl21 mM DTT0.1%DEPC30% sucrose To analyse individual ribosome subunits, MgCl2 was eliminated from the gradient buffer.50% sucrose gradient buffer50 mM Tris-HCl,pH7.450 mM NH4Cl12 mM MgCl21 mM DTT0.1%DEPC50% sucrose To analyse individual ribosome subunits, MgCl2 was eliminated from the gradient buffer.37% sucrose gradient buffer

Lysis buffer10mM Tris, pH7.4

Buffers for ribosome and polysome analysis

30%GlycerolMade in 100 mL.RNA sample loading buffer (10X)50% glycerol10mM EDTA 0.025% Bromophenol blue 0.025% Xylene cyanolInoue transformation buffer, pH 6.7(125 mL, prepared just before use)10 mM PIPES 15 mM CaCl2.2H2O 250 mM KCl 55 mM MnCl2.4H2O (1.361 g is dissolved in 10 mL of water separately)PIPES(0.307 g), CaCl2.2H2O (0.275 g) and KCl (2.325 g)were added to 80 mL ofsterile water while mixing with a magnetic stirrer and the pH was adjusted to 6.8with 1 N KOH. After attaining the appropriate pH, MnCl2solution wasadded slowly in aliquotes of 300 μL over 10 min,while stirring to avoidabrown precipitate.MOPS buffer(10X)0.2 M MOPS, pH 7.220 mM CH3COONa10 mM EDTABuffer was made in DEPC treated waterYeast transformation reagents1 M Lithium acetate 50% Polyethylene glycol2 mg/mLSalmon sperm carrier DNA Dimethyl sulfoxide (DMSO) Zymolyase cocktail buffer for yeast colony PCR 2.5 mg/mLZymolyase (ZymoResearch)1.2 M SorbitolZymolyase buffer was prepared in 1X PBS

Yeast lysis buffer for genomic DNA extraction50 mM Tris-HCl,pH 8.010 mM EDTA 150 mM NaCl 1% Triton-X 1% SDSAE buffer for RNA extraction50 mMSodium acetate,pH 5.31 mMEDTA,pH 8.0Solution was made in DEPC treated water. 0.2%diethyl pyrocarbonate (DEPC)was added to the water and stirred for 12 h. To remove DEPC,water was autoclaved twice. DNA sample loading buffer (6X)15.25 mg Bromophenol blue15.25 mg Xylene cyanol

Buffers for extraction and analysis of genomic DNA and RNA

EDTA (pH 8.0)186.1 g of EDTA.2H2O was dissolved into 800 mL of water stirredvigorously and the pH was adjusted with NaOH pellets. When the pH of the solution reached8.0 EDTA dissolvedcompletely and was made upto 1000 mL with water.Tris-HCl buffer (1M)121.1 g of Tris base was dissolved in 800 mLof water and pH was adjusted to 7.2 using concentrated HCl Tris-EDTA (TE) buffer 10 mM Tris-HCl, pH 8.01 mM EDTA Tris-Acetic acid EDTA (TAE) buffer 40 mM Tris base 1mMEDTApH was adjusted to 8.4with glacial acetic acid. TAE buffer was prepared as a 50X stock solution and used at 1Xconcentration.Tris-Saline20 mM Tris-HCl, pH 7.20.9% NaCl

PhosphateBuffered Saline (PBS) 137 mM NaCl 2.7 mM KCl 10 mM Na2HPO42 mM KH2PO4pH was adjusted to 7.3 using HCl and NaOH beforeautoclaving. PBS was prepared as a 10X stock solution and diluted to 1X concentration before autoclaving

Common buffers

Buffers and solutions

Plasmids containing the shRNA of interestwere either transfected transiently or were stably transfected. Transient transfection of shRNA was performed using eitherLipofectamine 2000 or PEI (as per the method explained before). Stable integration of shRNA was performed by transfecting shRNA along with retroviral packaging vector PCL-Ampho into BOSC23 packaging cells. The supernatantcontaining the packed viruses (viral medium)was collected at 48 and 72 hours of transfection. The viral mediumwas then added to thetarget cells in the presence of polybrene (8μg/mL). Two days later, cells were cultured in medium containing puromycin for the selection of stable clones.The clones stably expressing the desiredshRNA were identifiedandverified through western blotting and immunostaining using specificantibodies. A similar protocol was used to generate stable cell lines that expressed control shRNA

ShRNA

Cells were plated in a manner that they were 30-50% confluent on the day of transfection.Cells were washed with serum-free medium,and the serum-free medium was added to the cells as per plate size. SiRNA was diluted in the serum-free medium, and oligofectamine was diluted in serum-free media, separately (Table 10). Both the complexes were incubated at room temperature for 5 min. Diluted siRNA wasmixed gently with diluted oligofectamine and incubated at room temperature for 15 min. The final transfection mixture was added dropwise to the cells and mixed properly by gentle rocking. Cells were incubated for 4 hrs.,and the growth medium containing 10% FBS was added to the plates without removing the previous medium. Cells were incubated overnight at 37°C in a CO2 incubator. After overnight incubation, the siRNA transfection was repeated using the same protocol. Cells were harvested after 24-48 hours of second round siRNA transfection. The knockdown was detected bychecking the protein levels throughwestern blotting. (Note: SiRNA transfection is carried out in antibiotic free medium)Table 10: SiRNA transfection methodology

SiRNA

RNA interference

In planta growth assay for different strains of Xanthomonas oryzaepv. oryzicolawas performed by counting CFUs. For getting the CFUs, 1 cm2 leaf area surrounding the site of inoculation was cut and surface sterilized by dipping the leaf in 1% (vol/vol) sodium hypochlorite for 2 min followed by three washes with sterile water. To get the CFUs, sterilized leaves were crushed using mortar and pestle, and diluted appropriately for plating on PSA plate containing suitable antibiotics for differentially marked strains

In plantabacterial growth assay

strain or the ∆rpfFmutantharboring the Wild-typeallele in plasmid (pSC9).Genes that were significantly up regulated by 0.6 or more or down regulated by -0.6 or less fold (log2–fold change) were identified.The microarray data have been deposited in the NCBI Gene Expression Omnibus (GEO) under the GEO series accession number GSE53255

8x15k (AMADID: 25096) custom Agilent platform comprised of coding sequences for the three strains of Xanthomonas-X. oryzaepv. oryzae(KACC10331), X. oryzaepv. oryzicola(BLS256) and X. axonopodispv. citri 306 gathered from National Center for Biotechnology Information (NCBI). A total of 8113 probes were designed wherein 2120 probes corresponding to genes of interest replicated three times on Agilent platform. Feature extraction software GeneSpring GX version 10.5.1 of Agilent and GeneSpring GX percentile shift normalization was used for data analysis. Genes that were significantly up or down regulated by more than 1.5 fold and less than 0.5 fold were identified. Hierarchical clustering was performed for the differentially regulated genes and classified based on functional category. Data are the average of two hybridizations from biological replicates of each sample andraw data sets for this study are available at the Gene Expression Omnibus database (Accession number –GSE217809). Likewise, Microarray analysis for Xanthomonas oryzaepv. oryzicolawas performed by isolating RNA from the strains grown under low-ironcondition. The labeled cRNA samples were hybridized on to a Genotypic Technology Private Limited designed 8x15k (AMADID: 41087) Agilent platform. Data extraction from Images was done using Feature Extraction software v 10.7 of Agilent. Data normalization was done in GeneSpring GX using 75thpercentile shift and normalization to specific samples. Differentially regulated genes were clustered hierarchically to identify significant gene expression patterns.Genes were classified based on functional category. Hierarchical clustering of DSF regulated genes in X. oryzaepv. oryzicola grown under low-iron conditions is based on similar expression profiles in ∆rpfFmutant vs either the Wild-typeBXOR1 strain or ∆rpfF(pSC9). Clustering analysis was performed using GeneSpring GX Software using Average Linkage rule with pearson uncentered distance metric. log2–fold change differences between the ∆rpfFmutant with either the Wild-typeBXOR1

Xanthomonas oryzae pv. oryzae strains grown in PS medium to an OD600of 1, were collected, washed once with 150 mM sodium chloride (NaCl) solution to remove excess EPS. RNA isolation was performed using Trizol method described above. After isopropanol precipitation, RNA was frozen at -80°C. Quality of RNA was examined by determining the RNA integrity number (RIN) before microarray analysis. Microarray experiments were performed at Genotypic Technology Pvt. Ltd., Bangalore.Briefly, a

Microarray analysis

shaking at 200 rpm. 1% of overnight grown culture was inoculated in 100 ml fresh PS medium and grown to obtain log-phase culture. Log phase Xanthomonas culture was kept on ice for 10-15 min, aliquoted in 50 ml pre-chilled centrifuge tubes and centrifuged at 4000-5000 g at 4°C for 10 min. Supernatant was discarded and pellet from each tube was gently resuspended in 10-20 ml sterile chilled water. Next, cells were harvested by centrifugation at 4000 g at 4°C for 10 min and supernatant was discarded. Harvested cells were washed twice and finally resuspended in adequate amount of prechilled sterile water. 100 μl of cell suspension was aliquoted in sterile 1.5 ml microcentrifuge tubes and kept on ice. For transformation, Xanthomonaselectrocompetent cells and appropriate amount of plasmid DNA was mixed, and kept on ice in laminar hood. This mixture was added to 1 mm electroporation cuvettes (Biorad) and tapped gently to allow the cells to settle properly in order to avoid air bubbles. Competent cells were electroporated (1800 V, 25 μF, 200 Ω, 1mm cuvette) followed by immediate addition of fresh PS broth in the cuvette, mixed properly and taken in the microcentrifuge tubes. Microcentrifuge tubes containing transformed cells were incubated at 28°C for 2 hours with continuous shaking for recovery. After recovery, cells were plated on specific medium with appropriate antibiotics and incubated in 28°C plate incubator

For electrocompetent cell preparation, single colony of desired Xanthomonasstrain was inoculated in 5 ml PS medium and grown overnight at 28°C

Xanthomonastransformation

Liquid scintillation cocktail5 g PPO (2,5-diphenyloxazol)0.3 g POPOP (1,4-bis (5 phenyl 1,2-oxazole) Benzene Volume was adjusted to 1L with toluene.MUG (4-methylumbelliferyl β-d-glucuronide)extraction buffer1 mM MUG substrate50 mM Sodium dihydrogen phosphate (pH-7.0)10 mM EDTA0.1% Triton X-1000.1% Sodium lauryl sarcosine10 mM β-MercaptoethanolLactophenol solution (100 g)25 g Lactic acid (20.66 ml)25 g Phenol 50 g Glycerol (39.77 ml)These three components were mixed together and 1 volume of lactophenol was added to 2 volumes of ethanol

CAS solutiona) 0.06 g Chrome Azurol S dye in 50 mlb) Fe (III) solution: 10 ml1 mM FeCl310 mM HClc) 0.072 g HDTMA in 40 mlAll the above three solutions were mixed together and autoclaved prior to use

Other solutions

For estimation of tannase activity the reaction mixture (4 ml) contained 1.0 ml of 1.0% tannic acid (prepared in citrate-phosphate buffer, pH 5.0), 2.0 ml of citrate-phosphate buffer (pH 5.0) and 1.0 ml of appropriately diluted culture supernatant. The reaction mixture was incubated at 40°C for 30 min in a water bath. The reaction was stopped by adding 4.0 ml of 2.0% BSA solution. In the control reaction, BSA was added prior to incubation. Now the tubes were left for 20 min,at room temperature, for precipitating the residual tannins and subsequently centrifuged at 10,000 rpm for 20 min. The end product, gallic acid thus formed was estimated by diluting 20 μl of the supernatant to 10 ml with DDW. Now, the absorbance at 260 nm was read against a blank (DDW) in a UV spectrophotometer (1601, Shimadzu Corporation, Japan). One unit of tannase: One tannase unit is defined as the amount of enzyme that releases 1 μmol of gallic acid from the substrate (tannic acid) per ml per min under standard assay conditions

In this method, tannase activity was estimated through spectrophotometric method by determining the concentration of the end product i.e., gallic acid, by estimating the absorbance at 260 nm. Reagents: •Tannic acid (1.0%): The solution was prepared by dissolving 1.0 g of tannic acid in 100 ml of citrate-phosphate buffer of the desired pH.•Bovine serum albumin (BSA): BSA (2.0%) was prepared in citrate phosphate buffer (pH 5.0)

Estimation of tannase activity (Deschamp et. al., 1983)

Overnight-grown C. glabratacells were freshly inoculated either in YNBmedium or YNBmedium supplemented with BPS (50 μM) or FeCl3(500 μM) and allowed to grow for 4 h at 30°C, 200 rpm. After 4 h growth, cells were spun down at 4,000 rpm for 5 min in a refrigeratedcentrifuge set at 4°C and total protein was isolated. For estimation of histone deacetylase (HDAC) activity, 40 μg of protein samples were taken and HDAC Fluorometric Activity Assay Kit (#10011563; Cayman Chemical Company, Ann Arbor, MI, USA) was used as per manufacturer’s instructions. Fluorescence intensity values obtained inthepresence of the HDAC inhibitor, trichostatin A, were subtracted from those of the samples without inhibitorand plotted as relative arbitrary fluorescence units

Estimation of histone deacetylase (HDAC) activity

Bacterial plasmid DNA was isolatedusing the QIAprep® spin Miniprep kit (QIAGEN, 27106). 10 ml of LB medium supplemented with appropriate antibioticswas inoculated withasingle bacterial colony and incubated at 37°C for 12-16 h. Cultures were spun down at 8,000 rpm for 5 min, supernatant was discarded and the cell pellet was processed to isolate plasmid DNA as per instructions given in the kit. DNA was eluted either in nuclease-free water or in elution buffer provided in the kit and stored at -20°C until use

Plasmid isolation

Bacterial transformation

Bacterial plasmid DNA was isolatedusing the QIAprep® spin Miniprep kit (QIAGEN, 27106). 10 ml of LB medium supplemented with appropriate antibioticswas inoculated withasingle bacterial colony and incubated at 37°C for 12-16 h. Cultures were spun down at 8,000 rpm for 5 min, supernatant was discarded and the cell pellet was processed to isolate plasmid DNA as per instructions given in the kit. DNA was eluted either in nuclease-free water or in elution buffer provided in the kit and stored at -20°C until use

Plasmid isolation

E. coliDH5α ultra-competent cells were used for all bacterial transformations. Briefly, frozen DH5α ultra-competent cells were taken out from -80°C freezerandthawed on ice for 15 min. DNA to be transformed was added to the bacterial cell suspension and incubated on ice for 30 min. For transforming ligation mixtures and plasmids,5-10 μl and 100-500 ng of DNA was used, respectively. Followed by 30 min incubation on ice, heat shock was given for 60-90 sec at 42°C in a water bath and cells were immediately kept back onice for 2 min. To this,1 ml of sterile LB medium was added and tubes were incubated inashaker incubator set at 37°C, 200 rpm for 45 min.Next, cells were spun down and resuspended in 500 μl of LB medium. About 100-200 μl of resuspended cells were plated on LB-agar medium containing appropriate antibiotics and incubated for 12-16 h at 37°C. Transformants were purified on LB-agar plates containing appropriate antibiotics andpositive transformantscarrying desired DNAwere verified by PCR, restriction digestion and sequencing analyses

Bacterial transformation

Stripping buffer100 mM β-mercaptoethanol2 % SDS62.5 mM Tris-HCl (pH 6.7)Final volume was madeto 250 ml with water

Transfer buffer (10 X stock solution)0.25 M Tris-HCl (pH8.0)1.92 M Glycine1% SDSThe stock solution was prepared asa10 X concentrate and was diluted to 1 X concentration prior to use.1X Transfer buffer (1 litre)200 ml Methanol100 ml 10X Transfer buffer700 ml WaterTris-Buffered Saline (TBS)50 mM Tris150 mM NaClFinal pHof the bufferwas adjusted to 7.4 with HCl.Blocking buffer5% Fat-free milk0.1% Tween-20Final volume was made to 100 ml with 1 X TBS.Wash buffer (TBS-T)TBS (1 X final concentration)0.1% Tween-20Final volume was prepared with water

Buffers for western blot experiment

2% DTTThe stock solution of SDS loading buffer was made asa4 X concentrateand was added to the protein sample to the final concentration of 1 X.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSThe stock solution was prepared as a 10 X concentrate and was diluted to 1 X concentration prior to use.Resolving gel mix (12%, 10 ml)3.3 ml H2O4 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix2.5 ml 1.5 M Tris-HCl (pH 8.8)100 μl 10% SDS100 μl 10% Ammonium persulfate (APS)4 μl N,N,N′,N′-Tetramethylethylenediamine (TEMED)Stacking gel mix (5%, 3 ml)2.1 ml H2O0.5 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix380 μl 1 M Tris-HCl (pH 6.8)30 μl 10% SDS30 μl 10% APS3 μl TEMED

2% DTTThe stock solution of SDS loading buffer was made asa4 X concentrateand was added to the protein sample to the final concentration of 1 X.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSThe stock solution was prepared as a 10 X concentrate and was diluted to 1 X concentration prior to use.Resolving gel mix (12%, 10 ml)3.3 ml H2O4 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix2.5 ml 1.5 M Tris-HCl (pH 8.8)100 μl 10% SDS100 μl 10% Ammonium persulfate (APS)4 μl N,N,N′,N′-Tetramethylethylenediamine (TEMED)Stacking gel mix (5%, 3 ml)2.1 ml H2O0.5 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix380 μl 1 M Tris-HCl (pH 6.8)30 μl 10% SDS30 μl 10% APS3 μl TEMED

Total cell lysis buffer (Homogenization buffer)50 mM Tris-HCl (pH 7.5)2 mM EDTA10 mM Sodium fluoride*1 mM Sodium orthovanadate*1 X protease inhibitor cocktail (Sigma, P 8215)** Were added fresh before use.SDS-PAGE30% acrylamide solution29 g Acrylamide1 g N,N’-MethylenebisacrylamideDissolved in 100 ml H2O10% Sodium Dodecyl Sulfate (SDS)10 g SDS in 100 ml H2OSDS loading buffer130 mM Tris-HCl (pH 8.0)20% (v/v) Glycerol4.6% (w/v) SDS0.02% Bromophenol blue

Buffers for protein extraction and separation by SDS-PAGE (sodium dodecyl sulphate-polyacrylamide gel electrophoresis)

Phenol solution saturated with 0.1 M citrate buffer (pH 4.3 ± 0.2)was procured from Sigma (P4682)

Buffer C100 mM Tris-HCl (pH 7.5)10 mM EDTA10% SDSPhenol:Chloroform:Isoamyl alcohol (25:24:1) solution25 ml Tris-equilibrated phenol (pH 8.0)24 ml Chloroform1 ml Isoamyl alcoholDNA sample loading buffer0.25% Bromophenol blue0.25% Xylene cyanol15% FicollStock solution of the loading buffer was prepared in water as a 6 X concentrate and was added to the sample DNA to the final concentration of 1 X.RNA isolation bufferAE buffer3 M sodium acetate0.5 M EDTA (pH 8.0)Reagents used for RNA isolation were prepared in DEPC-treatedwater and stored at 4°C. For preparationof DEPC-treated water,0.1 ml DEPC was added to 100 ml waterand kept overnight onamagnetic stirrer. Followingincubation,the solution was autoclaved to remove any traces of DEPC.Acid phenol solution

Genomic DNA isolation buffersBuffer A50 mM Tris-HCl10 mM EDTA150 mM NaCl1% Triton-X1% SDSBuffer B50 mM Tris-HCl (pH 7.5)10 mM EDTA1.1 M Sorbitol50 mM β-mercaptoethanol (Added freshbefore use)

Buffers used for nucleicacid extraction

10 mg/ml carrier DNA 5 μlAbove-mentioned reagents were added to prepare thetransformation mixture, and the volumes indicated wereused per transformation.500-1,000 ng of desired transforming DNA was added to this transformation mixture and final volume was adjusted to 360 μl with sterile water.Carrier DNA (Sonicated salmon sperm DNA, Stratagene, 201190) washeat denatured at 95⁰C for 10 min and transferred on ice before additionto the transformation mixture.43 μl DMSO was added to each transformation mixture before heat shock.Zymolyase cocktail buffer for yeast colony PCR2.5 mg/ml zymolyase (MP Biomedicals, 0832092)1.2 M SorbitolThe cocktail was prepared in sterile water

Tris-acetic acid EDTA (TAE) buffer40 mM Tris Base0.5 M EDTAFinal pHof the bufferwas adjusted to 8.5 with glacial acetic acid.TAE buffer was prepared as a 50 Xconcentrate and diluted to 0.5X concentration prior to use as agarose gel electrophoresis running buffer and to cast agarose gels.HEPES [4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid] buffer1 M HEPESFinal pHof the bufferwas adjusted to 7.5 with NaOH.HEPES was used as a buffering agent forpreparationof different pHmedium. Buffer was filter-sterilizedby usinga0.22 μm membrane filterand stored at 4°C.INOUE transformation buffer10 mM PIPES15 mM CaCl2.2H2O250 mM KCl55 mM MnCl2.4H2OFor preparation ofINOUE transformationbuffer,above-mentioned solutes were dissolved in appropriate amount in 800 ml of water and then 20 ml of 0.5 M PIPES(piperazine-1,2-bis[2-ethanesulphonic acid])(pH 6.7) was added. Final volume was adjusted to 1 litre with water, buffer was filter sterilized by usinga0.22 μm membrane filter and stored at -20°C. Stock solution of PIPES was preparedseparatelyby dissolving 15.1 gm of PIPES in 80 ml of water, pH was adjusted to 6.7 using 5 M KOH and volume was adjusted to 100 ml.Yeast transformation reagents1 M lithium acetate 36 μl50 % polyethylene glycol 240 μl

Phosphate-Buffered Saline (PBS)137 mM NaCl2.7 mM KCl10 mM Na2HPO42 mM KH2PO4Final pH of the buffer was adjusted to 7.3with 11.6 N HCland volume was adjusted to 1 Lbefore autoclaving.PBS was prepared as a 10X stock solution and diluted to 1 X concentration before autoclaving.Tris-HCl buffer0.5 M Trizma BaseFinal pHof the bufferwas adjusted to 7.6 using 11.6 NHCl.Tris-EDTA (TE) buffer10 mM Tris-HCl (pH 8.0)1 mM EDTATE buffer was prepared as a 10 X concentrate and diluted to 1 X concentration before use

Common buffers

Buffers and solutions

ncubated with appropriate Alexa-488 conjugated secondary antibodies diluted in PBST with 2% BSA at room temperature for 1 h (for dilutions refer to Table-2.3). The cover slips were washed with PBST, mounted on glass slides using Vectashield mounting medium with DAPI. Images were acquired on a LSM 510 META confocal microscope (Zeiss, LSM acquisition software, 63x 1.4 N.A. objective) at a 0.7 scan zoom to collect maximum number of cells per field. The number of foci in each nucleus was manually counted by changing contrast identically across all the samples. A minimum of 10 random fields were imaged per sample. Data are represented as average number of foci per nuclei.

Localization of the DNA damage response proteins γH2AX, Rad51 and BLM and mitotic marker H3S10 (Histone H3 phosphorylated on Ser10) upon genotoxic stress and recovery was analyzed by immunofluorescence, following hypotonic lysis. Cells were seeded on cover slips in 12 well plates at 10-15% confluenceand incubated overnight. Cells were treated with 0.5 mM hydroxyurea and 0.25 μg/mL neocarzinostatin for 12 h. Coverslips were washed twice with PBS and cells were incubated in hypotonic lysis buffer containing 10mMTrisHCl (pH 7.4), 2.5mM MgCl2, 1mM PMSF and 0.5% NP-40, on ice for exactly 8 min on a shaker at 50-60 rpm. Cells were washed twice on ice, with ice cold PBS for2 min, with continuous shaking. Fixation was carried out with ice-cold 100% ethanol (which hadbeenkept overnight in -20°C) for 4 min, shaking on ice. 500 μLof ethanol was added to each cover slip during fixation. Cells were washedthrice with 1 mL PBS containing 0.2% Tween-20 (PBST), for 8 min each,at room temperature with shaking.Nonspecific interactions were blocked by incubating the cells for 30 minwith 2% BSA diluted in 1X PBS. Cover slips were again washed twice with 1 mLPBST, incubated with appropriate primary antibody (Table-2.3) diluted in PBS + 0.2% BSA for 2 h at room temperature. 200 μLof antibodywasplaced directlyonthecover slips. Post incubation, the cover slips were washed thrice with 1 mL PBSTfor 3 min each and the cells were

Immunofluorescence

3.4 mL H200.63 mL 30% acrylamide solution (acrylamide:bis-acrylamide; 29:1)0.83 mL 1 M Tris (pH 6.8)0.05 mL 10% SDS0.05 mL 10% ammonium persulfate (APS)0.005 mL N,N,N',N'-Tetramethylethylenediamine (TEMED)Resolving gel solution (12%)10 mL3.3 mL H204 mL 30% acrylamide solution (acrylamide:bis-acrylamide; 29:1)2.5 mL 1.5 M Tris (pH 8.8)0.1 mL 10% SDS0.1 mL 10% ammonium persulfate0.004 mL N,N,N',N'-Tetramethylethylenediamine (TEMED)SDS-Running buffer(Tris/Glycine/SDS)25 mM Tris-Cl192 mM glycine0.1% SDSTransfer Buffer25mM Tris-Cl190 mM glycine20% MethanolMTT dyeMTT dye was dissolved in PBS at 5 mg/mL concentration. Filtered through 0.45 μm syringe filters, and stored in dark at 4ºC

Hypotonic lysis buffer10mMTris Cl (pH 7.4)2.5mM MgCl2, 1mM PMSF 0.5% NP-40Hypotonic bufferPrewarmed 0.075 M KCl Fixatives used in this study100% ethanol kept overnight at -20ºCfor immunofluorescence by prelysis protocol70% ethanol kept overnight at -20ºCused for PI based cell cycle analysisMethanol: glacialactetic acid (3:1) for cytogenetic analysis4% Paraformaldehyde-4 g of paraformaldehyde dissolved in 100 mL waterPI staining solutionPBS containing, 0.1% Triton X-1000.2 mg RNase 20μg propidium iodideReagents required for Tris-Glycine SDS-PAGESDS-PAGE 30% Acrylamide solution29 g of acrylamide and 1 g bi-acrylamide (29:1 ratio) dissolved in 100 mL water10% SDS10 g SDS dissolved and 100 mL waterLaemmli buffer40% Glycerol 240 mM Tris/HCl pH 6.8 8% SDS 0.04% bromophenol blue 5% beta-mercaptoethanolStacking gel solution (5%) 5mL

Buffers

The method followed was similar to that describedpreviously with slight modifications (Jinet al., 1992; Schleifet al., 1973).Overnightbacterial cultures were grown in LBand subcultured 1:500 in the same medium in a volume of 20 mlat 30oC.Cultures were induced with 1mM IPTG at A600=0.4. 0.9ml samples were aliquotedat time intervals of 0 sec, 20 sec, 40 sec, 1 min, 1.5 min, 2 min, 2.5 min, 3 min, 3.5 min, 4 min, 4.5 min, 5 min, 5.5 min and 6 min into 0.1ml of 1mg/ml ice cold chloramphenicol and the samples were put on ice. After sampling, 0.5ml of each culture was taken for β-galactosidase assay.Square root of β-galactosidase activity (activity at time Tt−T0) was plotted against time. In the graph, the point of inflection of the curve on the X-axis determines the rate of elongation of RNAP whereas slope represents the promoter clearance, lacZmRNA stability and factors affecting translation of lacZ(Burovaet al., 1995)

RNA polymerase elongation rate measurement

Non-stringent washes were carried out in 2XSSC and 0.25-0.5% SDS in DEPC water.Stringent washing was done in 1XSSC and 0.5% SDS in DEPC water. Washing was carried out at 55-56oC for 20 minutes. After washing, the blot was covered in the saran-wrap and exposed to the phosphoimager film. After the desired time of exposure, the filmwas then scanned in phosphoimager and the picture saved.The densitometric analysis of the bands was carried out as described in the section 2.2.3.7.Normalization of the signal intensities in northern blotting experiments using probe against tRNA(U73)Arg5was done as follows. The intensity of the tRNA(U73)Arg5signalin the WT or the parent strain in the absence of IPTG was taken as 1 and the relative change in the other strain/growth condition calculated. The value thus obtained was corrected using the change in the corresponding 5S rRNA intensity relative to that in the WT/parent strain in the absence of IPTG

Washingof the membrane, exposure and scanning

Oligonucleotides and PCR products were end-labelled using phage T4-polynucleotidekinase (PNK, New England Biolabs or Fermentas or Sigma) with 32P-γ-ATP. The radiolabelling reaction mixture (20μl) contained 1X of buffer provided by the company, 10 units of T4-PNK and 40μCi of 32P-γ-ATP. The reaction mix was incubated for 1 hrat 37ºC and the reaction was heat-inactivated at 65oC for 20 minutes. The labelled oligonucleotides and DNA fragments were purifiedby the Qiagen nucleotide removal kit. Labelling efficiency was checkedeither by using Geiger-Muller (GM) counter orusing liquid scintillation counter.For scintillation counting, 1μl of radioactive sample wasadded to the 5ml scintillation cocktail, and radioactivity count was determined in the 32P channel of scintillation counter (Perkin Elmer, Liquid Scintillation analyzer, Tri-Carb 2910 TR, USA). Liquid scintillation cocktail consists of 5g PPO (2,5-diphenyloxazol) and 0.3g POPOP (1,4-bis (5 phenyl 1,2-oxazole) Benzene, adjusted to a volume of 1L in toluene

Radiolabelling of oligonucleotides

Recombineering was performed as described in(Yuet al., 2000)for engineering the linear DNA on the chromosome. The oligonucleotide primers were designed to amplify the DNA cassette to be engineered. Oligonucleotidesused for recombination contained30–50nt homology at the 5ʹ endtothesequences at the target siteand 20nt homology tothe DNA cassette at the 3ʹ end. The DNA cassettefor recombinationwas generated by PCR and would contain30-50 bp homologiesto the target site. A strain with the target DNA and carrying a defective λ-prophage with gam,betaand exo genes (thatfacilitate homologous recombination)under the control of a temperature-sensitive λ cI-repressorwas grown at 30oC. At an A600of 0.4, the culture was shifted to 42oC for 15 minutes to express gam,betaand exo genes. Cells becomecapable ofrecombining linear DNA introduced into the cell by electroporation. 50-100ng ofamplified DNA cassettewas used for electroporation whichwas performed using theBio-Rad Gene Pulser set at 1.8 kV, 25 μF with Pulse controller of 200 ohms

Recombineering

white colonies were recovered and purified to give growth. If the mutation caused synthetic lethality then white colonies (that lack the shelter plasmid) would not be observed since plasmid loss would result in growth arrest. Therefore, lethality was inferred when either white colonies were not recoveredor were recovered but failed to purify further

To determine whether a particular mutation conferred lethality in the ppGpp0or ΔdksAbackground, an assay was devised based on the use of an unstable, easy to cure shelter plasmidpRC7, similar to that described previously(Bernhardt & de Boer, 2004). In the wild-type strain carrying pRC7, this plasmid can be lost at a frequency of 20-30% in the absence of the selection. However, this will not be seen if the plasmid loss leads to cell death. Since the plasmid pRC7 confers a lac+phenotype, in the absence of the selection plasmid loss can be visualized on X-gal IPTG containing plates as white colonies in a Δlac strain whereas the colonies that retain the plasmid will appear blue.In order to carry outsynthetic lethal screen in the ppGpp0or ΔdksAstrains, the spoT or dksAgenes cloned in pRC7 under the control of lacpromoter were used. Theseshelter plasmids,namely,pRCspoT or pRCdksA, respectivelywere transformed into the ppGpp0or ΔdksAstrain. To test the synthetic growth phenotypes, the mutations of the genes to be tested were introduced by phageP1 transductions. The resultingstrains were grown overnight in LBcontaining the antibiotic selection for the shelter plasmid and IPTG for expression of spoTor dksA, subsequently washedin minimal A medium and dilutions(usually 10−5or 10−6) of these cultureswere spreadon X-gal and IPTG containing plates without antibiotic selection for the shelter plasmid. The phenotypes of the white colonies in comparison with the blue colonies were noted. Viability of the strains was inferred when

Blue-white screening for viability or lethality phenotype

The antibiotics were used at the below concentrations (μg/ml) unless otherwise stated

Antibiotics

“It’s become like a thing people say when they can’t make their rent,” says Jenna, 22, a New York video-game designer. “ ‘Well, I could always just get a sugar daddy,’ ‘I guess I could just start camming,’ ” or doing sexual performances in front of a Webcam for money on sites like Chaturbate. “And it’s kind of a joke, but it’s also not because you actually could. It’s not like you need a pimp anymore. You just need a computer.”

In their absence, some airports have had to close checkpoints, as Baltimore-Washington International did over the weekend

Washington state Attorney General Bob Ferguson said Thursday that Motel 6 shared the information of about 80,000 guests in the state from 2015 to 2017. That led to targeted investigations of guests with Latino-sounding names, according to Ferguson. He said many guests faced questioning from ICE, detainment or deportation as a result of the disclosures. It's the second settlement over the company's practice in recent months.

ZFIN_ZDB-ALT-050512-6

ZFIN_ZDB-GENO-120217-6

RRID:ZFIN_ZDB-GENO-100427-6

RRID:ZFIN_ZDB-ALT-070423-6

ZFIN: ZDB-ALT-160921-6

Adipose tissue is no longer considered to be an inert tissue that stores fat. This tissue is capable of expanding to accommodate increased lipids through hypertrophy of existing adipocytes and by initiating differentiation of pre-adipocytes. Adipose tissue metabolism exerts an impact on whole-body metabolism. As an endocrine organ, adipose tissue is responsible for the synthesis and secretion of several hormones. These are active in a range of processes, such as control of nutritional intake (leptin, angiotensin), control of sensitivity to insulin and inflammatory process mediators (tumor necrosis factor α (TNF-α), interleukin-6 (IL-6), resistin, visfatin, adiponectin, among others) and pathways (plasminogen activator inhibitor 1 (PAI-1) and acylation stimulating protein (ASP) for example). This paper reviews some of the biochemical and metabolic aspects of adipose tissue and its relationship to inflammatory disease and insulin resistance.

Say: Teach ye the Cause of God, O people of Bahá, for God hath prescribed unto every one the duty of proclaiming His Message, and regardeth it as the most meritorious of all deeds.

Wherefore, after I have abridged the record of my father, then will I make an account of mine own life.

In 2016,Microsoft launched Tay, an experimental artificial intelligence chat bot. Learning from interactions with Twitter users, Tay was shut down after one day because of its obscene and inflammatory tweets. This article uses the case of Tay to re-examine theories of agency. How did users view the personality and actions of an artificial intelligence chat bot when interacting with Tay on Twitter? Using phenomenological research methods and pragmatic approaches to agency, we look at what people said about Tay to study how they imagine and interact with emerging technologies and to show the limitations of our current theories of agency for describing communication in these settings.

The Service Card for the Stuttgart Services project is the first electronic ticket for e-mobility in and around Stuttgart. In the initial phase of the project, subscribers have been able since 2015 to use the Service Card as an electronic ticket. Marketed under the polygo brand, the project was funded by the German Federal Ministry for Economic Affairs and Energy until June 2016.As one of 40 projects included in Baden-Württemberg’s “LivingLab BWe mobil” e-mobility showcase, the Stuttgart Services project seeks to make access to e-mobility services as seamless as possible for customers traveling in the Stuttgart region, and to supplement them with further citywide offers. The Service Card will not only open up the city’s e-mobility potential; it will also integrate everyday aspects of urban life by serving as a library card, swimming-pool membership card, and payment card.

Stadtinfo Köln (City Info Cologne) is a research project financed by the German Federal Ministry of Research that centres around the collection of various traffic data to be distributed to diverse platforms including the Internet, portable devices such as PDAs and mobile telephones, in-car navigation systems and variable message signs throughout the city. The project was implemented over a four-year period from 1998 to October 2002 by 15 partners in co-operation with the city of Cologne at a cost of €16.1 million.

We have this platform built to all those in the areas of "Digital School" and "Digital Media" are interested in a central, national point of contact to offer, on which it is to exchange and cooperate can. In addition, we would like to inform you about the use of IT in the Cologne educational landscape.

Cologne is one of Europe’s leading medical centres. The health sector in Cologne stands out with a high level of expertise and top-rate cutting edge medicine. The medical fraternity in Cologne is made up of renowned medical experts at the cutting edge of their profession. Many of them have trained abroad and are members of national and international societies, chambers and research communities in their various disciplines. Similarly, the therapeutic, nursing and other skilled staff are trained and qualified on the highest scientific level. The profile structure in Cologne consists of 20 hospitals, clinics and highly specialized day and specialist clinics with more than 7,100 beds. The more than 2,200 doctors and 10,000 therapeutic, nursing and other skilled staff offer a wide range of experience, treating more than 300,000 patients every year from Germany and all over the world, on a residential and out-patient basis. The various hospitals and clinics work together in close cooperation. Specialists in various disciplines join together in advising the patient on the best possible treatment in each specific case; it goes without saying that this can also take place in the presence of an interpreter or doctor from the foreign patient’s home country.

Cycling is active climate protection and pollutes cities much less than the rest of the road. With this in mind, the company has developed and offers cyclists from all over Germany the opportunity with the help of the Radbonus app to receive financial rewards from kilometers driven by countless partners such as health insurances, employers, online shops and many more. The company, which has been operating since October 2015, would like to reward and acknowledge the valuable contribution every single cyclist makes to the environment and to climate protection. " Cyclists are heroes of everyday life for me,"Radbonus founder and CEO Nora Grazzini comments. Born in Cologne, she describes herself as a passionate cyclist and believes in making the world a whole lot better with her business idea. After a distance of 50 kilometers, the first rewards can be erradelt.

Electric cars are an energy-efficient and potentially regenerative alternative to cars powered by fossil fuels. In order to promote this regenerative alternative, colognE-mobil has already installed 122 charging stations for electric cars (TankE) in and around Cologne, one of which is located on the Klimastraße in the car park behind the Kaufhof. Further charging points will soon be created directly on the Klimastraße.

Neusser Straße in the district of Nippes shows what a future SmartCity could look like, because a section of the street becomes Cologne's climatic road. There, the most important energy projects are implemented. All facets of climate protection are taken into account: from optimal building insulation and maximum heat efficiency to charging stations for electric vehicles and low-energy street lighting. Klimastraße offers innovative companies the opportunity to test their new products and services in everyday life. If possible, companies finance their projects themselves, promising projects are funded from the project budget of RheinEnergie AG. Companies also gain additional value by exchanging valuable information and innovative ideas with other companies, including at climate road events. For all the enthusiasm for innovation, of course, only technology is used that meets the very strict German safety requirements. In addition, RheinEnergie and the City of Cologne make sure that the high Cologne supply standards are adhered to. For all new projects, safety comes first - technically as well as logistically. That is why not everything changes in the climate route - but certainly much better. The following section deals in more detail with the individual projects.

In the framework of the project "Celsius" we investigate which method leads to the best possible results in order to increase the chances of realization. For this purpose, demonstration plants were built at three different locations in the city. In Cologne-Wahn and Cologne-Mülheim, the heat is extracted directly from the sewer using so-called gutter heat exchangers. The heat exchangers with a length of 60 and 120 meters are installed at the bottom of the canal. The heat transfer medium transports the heat from there to the heat pumps with a capacity of 150 or 200 kW in the boiler rooms of the schools supplied. In Cologne-Nippes, a total of three schools and a sports hall are supplied by sewage heat. Here, the wastewater is pumped through a newly laid, 400-meter-long bypass to the boiler room of the Edith Stein-.Realschule. There, in the largest direct evaporator in Germany (400 kW), heat is transferred directly to the heating circuit of the schools. With the three demonstration plants, an environmental relief of a total of 500 t CO2 / year is achieved. The use of wastewater heat is technically mature and well developed. Nevertheless, this form of waste heat utilization has so far been a niche existence. This is partly because it is still little known, often the necessary information is not available locally, their implementation is relatively complex and requires high investment. Further reducing these barriers is the goal of the Cologne CELSIUS project.