Planning load management
I'm somehow missing the transition from general networks to the networks of charging stations. Should we consider the charging station networks on this level at all, or better to handle it as an use case example?
12 Matching Annotations
- Oct 2025
-
0.0.0.0:8000 0.0.0.0:8000
-
-
Mobile radio gateway shows
Is the meaning "gateway shows" or "the section "Mobile radio gateway" shows"?
-
-
A long dash would be better. Or at least it have to be used consistently within the document.
-
—
Long dash looks strange here: shouldn't it be wrapped by spaces?
-
50m
space between number and unit
-
Adding additional
Is there a better wording?
-
Best performance when all devices operate on one three-phase circuit.
Incomplete sentence
-
Up to 50m: Good performance 50-100m: Potentially acceptable performance Over 100m: Not recommended
Spaces before "m" unit.
-
Plan your power supply and circuit breaker locations Consider distances between devices; keep under 50m per hop when possible. See Distance guidelines below. Decide if you need one network or multiple networks Plan your load management approach
Should here be a period at the end of each point? It should be at least consistent.
-
50m
space between number and unit
-
-
-
Red for 5 sec. Node booting after restart or power cycle. Steady red Node not connected to a MultiNode network; ready for configuration. Steady white Node connected to a MultiNode network. White: 1.8 sec. on / 0.2 sec. off Node connected but configuration incomplete. White/red alternating, 0.3 sec. each Firmware update in progress. Red flashing, 0.5 sec. on/off
Is it not better to use standard SI unit notation like "5 s" instead of "5 sec."? It looks somehow strange, at least for me.
-
-
web.hypothes.is web.hypothes.is
-
PLC: Sends network data through your home’s electrical wiring.
Unexpected explanation for PLC. Expected: Power Line Communication, probably with more description.
-