4 Matching Annotations
  1. Apr 2020
  2. www.mouser.com www.mouser.com
    Sensirion_PM_Sensors_SPS30_Datasheet-1500984.pdf
    2
    1. Plau88 08 Apr 2020
      Both SCL and SDA lines are open drain I/Os. They should be connected to external pull-up resistors (e.g. Rp = 10 kΩ).Important notice:in order to correctly select I2C as interface, the interface select (SEL) pin must be pulled to GND before or at the same time the sensor is powered up.

      Are they grounded already...SCL corresponds to cable 2 and SDA cable 3

      refer to placement: https://hyp.is/Xz22oHkGEeqQGeNAv2Jknw/github.com/brannow/sps30

      thomasproject resistors
    2. Plau88 07 Apr 2020
      3Hardware Interface Specifications

      This is showing the description of each pin?

      thomasproject ualriostgas
    Visit annotations in context

    Tags

    Annotators

    URL

    mouser.com/datasheet/2/682/Sensirion_PM_Sensors_SPS30_Datasheet-1500984.pdf
  3. github.com github.com
    brannow/sps30
    1
    1. Plau88 07 Apr 2020
      GPIO Pins

      To my guessing this is showing the placement of the pins

      thomasproject ualriostgas
    Visit annotations in context

    Tags

    Annotators

    URL

    github.com/brannow/sps30
  4. github.com github.com
    Sensirion/embedded-uart-sps
    1
    1. Plau88 02 Apr 2020
      Get Port of the Connected Sensor

      This is now public.

      thomasproject
    Visit annotations in context

    Tags

    Annotators

    URL

    github.com/Sensirion/embedded-uart-sps/blob/master/docs/getting-started-on-the-raspberry-pi.md