for the whole set of UEs

zero

PSI

This procedure is used to update UE policy and/or UE policy triggers.

when a UE Policy Container is received from the UE

the AKMA architecture becomes entirely different compared to GBA

each S-NSSAI may contain a Subscribed DNN

PDU Session types are defined: IPv4, IPv6, IPv4v6, Ethernet, Unstructured.

The expectation is that the URSP in the UE is always up to date

Network Slice Simultaneous Registration Group (NSSRG)

For any S-NSSAI, the network may at any one time serve the UE with only one Network Slice instance associated with this S-NSSAI until cases occur

a Network Slice instance can be associated with one or more S-NSSAIs, and an S-NSSAI can be associated with one or more Network Slice instances

eight S-NSSAIs

such S-NSSAI is comprised of either both an SST and an SD or only an SST without a standardised SST value and no SD

Network Slice Simultaneous Registration Group (NSSRG)

Network Slice Admission Control (NSAC)

Network Slice-Specific Authentication and Authorization (NSSAA)

Number of simultaneous connection of Network Slice instances per UE is limited

The AMF instance serving the UE logically belongs to each of the Network Slice instances serving the UE,

UE Configuration Update procedure for transparent UE Policy delivery

NSSAI information (e.g. Allowed NSSAI),

trigger UE to perform

Access Type (i.e. 3GPP access or non-3GPP access)

UE Configuration Update

concealed SUPI is known as SUCI (Subscription Concealed Identifier )

Subscription Permanent Identifier

5G Global Unique Temporary Identifier

A UE in CM-CONNECTED state can be in RRC Inactive state

When UE is in CM-Idle

Registration Request

Registration Request and Service Request

once an RRC connection has been established

CM-Connected

CM-Idle

N1 logical interface and it is combination of following

Connection Management (CM) is used to establish and release the control plane signaling connection between UE and AMF.

5G System Connection Management

User Equipment Route Selection Policy, or URSP

Basically APN is controlling network parameters (or configurations) by switching the traffic to various different gateway on the core network.