Oligonucleotides used in this study were designed manually by examining the relevant DNA sequences. Oligonucleotides were commercially synthesised at MWG Biotech Pvt. Ltd., Bangalore, Indiaor Ocimum biosolutions, Hyderabad, India. Oligonucleotides used inthis study are listed in Table 2.4 and 2.5

Oligonucleotides

Antibodies used in this study are listed in Table 2.3

Antibodies

All S. cereviseae and bacterial strains and plasmids used in this study are listed in Table 2.1and 2.2

Strains and plasmids

1. The composition of different types of gels run during the course of this study is

Media

StrainsThe

SiRNAWWP2 siRNA described earlier [216]and prevalidated siRNAs for PPM1G (catalog numbers S102658684 and S102658691) were purchased from Qiagen. ShRNAWWP2 shRNA (shRNA1, 5=-CAGGAUGGGAGAUGAAAUAUU-3=;shRNA2, 5= ACAUGGAGAUACUGGGCAAUU-3=)WWP1 shRNA (shRNA1, 5=-ATTGCTTATGAACGCGGCT-3=; shRNA2, ACAACACACCTTCATCTCC-3=)Both WWP2 and WWP1 shRNA were purchased from Open Biosystem.2.1.5Cell linesHeLa cells, HEK293T, and BOSC23celllineswere used in the present study wherever indicated. All the cells werecultured and maintained in RPMI 1640 supplemented with 10% serum and 1% antibiotic (penicillin-streptomycin)at 37° C with 5%CO2.2.2 Buffers and mediaThe buffers and media used in the present study is mentioned in the table 3.Table 3: Buffers and media used in the study

SiRNAandshRNA

All the primers (sequences)used for cloning the above-mentioned genes are providedin AppendixI

using gateway cloning method (Invitrogen). P73domain deletions were cloned in SFB destination vector. WWP2, WWP1, HACE1, E6AP, and PPM1G were cloned into SFB (S-protein/Flag/streptavidin binding protein (SBP) triple tag), GFP,and Myc mammalian destination vectors using the Gateway cloning technology (Invitrogen). WWP2 domain deletions were cloned into Myc-destination vector. WWP1 domain deletions were cloned into SFB-destination vector. PPM1G domain deletions were cloned into SFB mammalian destination vector using Gateway cloning. Bacterially expressing GST-p73, GST-∆Np73, GST-PPM1G, MBP-WWP1, MBP-WWP2, GST-WWP2, GST-WWP1 and GST-HACE1 were generated by using gateway technology. Ubiquitin WT and all the mutants were cloned into hemagglutinin (HA) mammalian destination vector. Flag-tagged Dvl2was purchased from Addgene. Dvl2 domain deletions were cloned into SFB-destination vectors. All the plasmid constructs generated in the present study are mentioned in table 2.Table 2: Plasmids used in the study

TAp73α and ∆Np73α were kindly gifted by Alex Zaika, Vanderbilt University. Full-length p73 and ∆Np73 were cloned into Myc and HA mammalian destination vectors

Expression plasmids

All the antibodies used in the present study are mentioned in the table 1.Table 1: Antibodies used in the study

Antibodies

The following chemicalswere used in the present study: Ampicillin, EDTA (USB), dNTPs, Taq DNA polymerase(Fermentas), Pfu DNA polymerase (Stratagene), DpnI (New England Biolabs), Plasmid miniprep, midiprep, and maxiprepkits(Qiagen, and Invitrogen), glycine, EGTA, NaCl, Tris (Fisher Scientific), NH4Cl, acrylamide(SRL), Cisplatin, Doxorubicin, MG132,Cadmium chloride,Nonident P-40, propidium iodide (PI),bis-acrylamide, SDS, TEMED, Ammonium persulphate (APS), CoomassieBrilliant Blue, DAPI, IPTG, kanamycin, Aprotinin, pepstatin, PMSF, -Glycerophosphate, Sodium Fluoride (NaF),Biotin, and DMSO(Sigma), Luciferase assay kit (Promega#1500), Gateway cloning kit, DMEM, FBS, RPMI, Opti-MEM medium,Met-/Cys-DMEM, dialyzed FBS,trypsin-EDTA, L-glutamine, PBS, Lipofectamine 2000, Oligofectamine, (Invitrogen), PEI(Polysciences), milkpowder (Warana), protein G agarose beads, Streptavidin sepharose beads, Glutathionesepharose beads, MBP beads (GE Healthcare), S-protein beads (Novagen/Calbiochem), HA beads(Covance), LB media(Himedia)

Chemicals and reagents

Liquid scintillation cocktail5 g PPO (2,5-diphenyloxazol)0.3 g POPOP (1,4-bis (5 phenyl 1,2-oxazole) Benzene Volume was adjusted to 1L with toluene.MUG (4-methylumbelliferyl β-d-glucuronide)extraction buffer1 mM MUG substrate50 mM Sodium dihydrogen phosphate (pH-7.0)10 mM EDTA0.1% Triton X-1000.1% Sodium lauryl sarcosine10 mM β-MercaptoethanolLactophenol solution (100 g)25 g Lactic acid (20.66 ml)25 g Phenol 50 g Glycerol (39.77 ml)These three components were mixed together and 1 volume of lactophenol was added to 2 volumes of ethanol

CAS solutiona) 0.06 g Chrome Azurol S dye in 50 mlb) Fe (III) solution: 10 ml1 mM FeCl310 mM HClc) 0.072 g HDTMA in 40 mlAll the above three solutions were mixed together and autoclaved prior to use

Other solutions

Transformation buffer I (Tfb-I) 30 mM Potassium acetate100 mM Rubidium chloride (RbCl2)10 mM Calcium chloride dihydrate (CaCl2.2H2O)50 mM Manganese chloride tetrahydrate (MnCl2.4H2O)15% (v/v) GlycerolpH was adjusted to 5.8 with 10% acetic acid and volume was adjusted to 500 ml with H2O. Transformation buffer II (Tfb-II) 10 mM MOPS75 mM CaCl2.2H2O10 mM RbCl2.2H2O15% GlycerolpH was adjusted to 6.5 with KOH (Potassium hydroxide) and volume was adjusted to 100 ml with H2O.

Buffers for E. colielectrocompetent cell preparation

50 mM Phosphate citrate buffer (pH-6.8)0.1M Citric acid0.2M dibasic Sodium phosphate16.9 ml Citric acid (0.1 M) and 33.1 ml Sodium phosphate (0.2 M) was mixed and volume was adjusted to 100 ml with H2O.Lipase assay0.1M Tris-HCl buffer (pH-8.2)pH was adjusted to 8.2 with HCl. 0.5 mM p-Nitrophenol standard solution8.69 mg p-Nitrophenol was dissolved in Tris-HCl buffer (0.1M) and volume was adjusted to 25 ml to make a final concentration of 25 mM.1volume of the above solution (25 mM) was diluted with 49 volume of 0.1 M Tris-HCl buffer to get a final concentration of 0.5 mM p-Nitrophenol standard solution.p-Nitrophenyl butyrate solution (420 μM)7.3 μl p-Nitrophenol butyrate (F.W. 209.2) 11 mg SDS650 μL Triton-X-100Volume was adjusted to 100 ml with H2O. Mixture was heated to 65°C in a water bath for 15 min, mixed well, and cooled down to room temperature prior to use. It can be stored upto 3 days at 4°C.Xylanase assay5 mg/ml RBB-xylan0.05 M di-Sodium hydrogen phosphate (Na2HPO4)

5 mg/ml RBB-Xylan was dissolved in 0.05 M Na2HPO4pH-7.5

Buffers for enzyme assaysCellulase assay

10% APS -30 μlTEMED -3 μlSDS loading buffer (2X)100 mM Tris-HCl (pH-6.8)20% (v/v) Glycerol4% (W/V) SDS0.02% Bromophenol Blue10% β-MercaptoethanolSDS-loading buffer was prepared as 2X stock solution in H2O and used at 1X concentration.SDS-PAGE running buffer14.4 g Glycine3.03 g Tris methylamine1 g SDSDissolved in H2O and volume was adjusted to 1L with H2O.Buffers for western blot analysisTransfer buffer (1 litre)14.4 g Glycine3.03 g Tris methylamine800 ml H2O 200 ml methanolBlocking and wash buffers (PBS-T)5% Fat-free milk0.05% Tween-20Volume was adjusted to 100 ml with1XPBS

Whole cell lysis buffer50 mM Sodium acetate 410 mg Sodium acetate anhydrous was dissolved in 80 ml H2O. pH was adjusted to 5.4 with glacial acetic acid and finally volume was adjusted to 100 ml with H2O.1 mM PMSF (phenylmethylsulfonyl fluoride) in isopropanol.Dialysis buffer50 mM Trizma basepH was adjusted to 7.5 by using concentrated HCl.Silver stainingFixing solution50% ethanol10% glacial acetic acid0.05% formaldehydeFinal volume was adjusted with sterile H2O.0.2% Silver nitrate solution (AgNO3)0.2 g AgNO3

0.075% formaldehyde (37% stock) Dissolved in 100 ml of H2O. Stored at 4°C for 1 hour in brown colored bottle.Developing solution 6% Sodium carbonate (Na2CO3)0.05% Formaldehyde (37% stock)0.02% Sodium thiosulphateStorage buffer50% EthanolSDS-PAGE30% Acrylamide solution29 g Acrylamide1 g Bis-acrylamideAcrylamide solution was prepared in H2O.Resolving gel mix (12%) (10 ml)H2O -3.3 ml30% Acrylamide:Bisacrylamide mix (29:1) -4 ml1.5 M Tris-HCl (pH-8.8) -2.5 ml10% SDS -100 μl10% Ammonium persulphate (APS) -100 μlN, N, N’,N’,-Tetramethylethylenediamine (TEMED) -4 μlStacking gel mix (5%, 3 ml)H2O -2.1 ml30% acrylamide:bisacrylamide mix (29:1) -500 μl1.5 M Tris-HCl (pH-6.8) -380 μl 10% SDS -30 μl

0.5% DEPC Added in H2O, stirred vigorusly and autoclaved prior to use.DNA sample loading buffer0.25% Bromophenol blue0.25% Xylene cyanol30% GlycerolDNA sample loading buffer was prepared in water

Buffers and solutions for protein extraction, analysis by SDS-PAGE (sodium dodecyl sulphate-polyacrylamaide gel electrophoresis) and silver staining

10 g of SDS (Sodium Dodecyl Sulfate) was dissolved in 80 ml of H2O, and volume was adjusted to 100 ml with H2O.CTAB/NaCl solution10% CTAB 0.7 M NaCl10 g of CTAB was dissolved in 80 ml 0.7 M NaCl solution by stirring it on a hot magnetic stirrer. Volume was adjusted to 100 ml with 0.7 M NaC1 solution.Lysozyme solution100 mg of lysozyme was dissolved in 1 ml of H2O (100 mg/ml).Proteinase K solution10 mg of proteinase K was dissolved in 1 ml of H2O (10 mg/ml).5 M Sodium chloride (NaCl) 292.2 g of Sodium chloride (NaC1; M.W. 58.44) was dissolved in 800 ml of H2O. Volume was adjusted to 1 liter with H2O. Sterilized by autoclaving.3 M Sodium acetate (NaOAc)(pH 5.2 and 7.0) 24.6 g sodium acetate anhydrous (CH3COONa; M.W. 82) was dissolved in 80 ml H2O. pH was adjusted to 5.2 with glacial acetic acid or 7.0 with dilute acetic acid. Volume was adjusted to 100 ml with H2O. Sterilized by autoclaving.Phenol:Chloroform:Isoamyl alcohol (25:24:1) solution25 ml Tris-equilibrated phenol24 ml Chloroform1 ml Isoamyl alcoholDEPC (diethyl polycarbonate) treated water

50 mM Tris-HCl (pH 8.0)10 mM EDTA (pH 8.0)100 μg/ml RNaseVolume was adjusted to 100 ml with sterile H2O.10% SDS

Buffers and solutions for extraction and analysis of genomic DNA and RNAResuspension buffer (P1)

PBS was prepared as a 10X stock solution and used as a 1X concentration.Tris-HCl buffer0.5 M Trizma BasepH was adjusted to 7.6 using concentrated HCl.Tris-Cl buffer was prepared as a 10X stock solution and used as 1X concentartion.Tris-EDTA (TE) buffer10 mM Tris-HCl (pH 8.0)1mM EDTATris Acetic acid-EDTA (TAE) buffer40 mM Tris base0.5 M EDTApH was adjusted to 8.5 with glacial acetic acidTAE buffer was prepared as a 50 X stock solution and used at 1 X concentartion.Potassium Phosphate buffer (0.1 M)1 M Potassium phosphate dibasic (K2HPO4)1 M Potassium phosphate monobasic (KH2PO4)61.5 ml of 1 M K2HPO4was mixed with 38.5 ml of 1 M KH2PO4, pH was adjusted to 7.0 and volume was adjusted to 1 L with H2O

Phosphate-Buffered Saline (PBS)137 mM NaCl2.7 mM KCl10 mM Na2HPO42 mM KH2PO4pH was adjusted to 7.3 before autoclaving

Common buffers

Buffers and solutions

10 mM Ferric ethylenediaminetetraacetic acid (Fe(III)EDTA)100 mM Magnesium chloride (MgCl2)Working solution 0.18% Xylose 670 μM L-Methionine10 mM Sodium glutamate14.7 mM Potassium dihydrogen phosphate (KH2PO4)40 μM Mangenese sulphate (MnSO4)240 μM Ferric ethylenediaminetetraacetic acid (Fe(III)EDTA)5 mM Magnesium chloride (MgCl2)1.2% AgarLuria Bertani (LB)0.5% Yeast extract1% Tryptone1% Sodium cholride (NaCl)Media and solutions were sterilized either by routine autoclaving at 121°C and 15 psi for 20 min or by filtration through membrane of 0.22 μM porosity

Peptone Sucrose (PS)1 % Peptone1 % SucroseFor preparing plates, 1.2 % agar was added to the medium before autoclaving.Minimal Medium (MM9)Stock SolutionMinimal Salt (2X) for 250 mL 5.25 g di-Potassium hydrogen phosphate (K2HPO4) 2.25 g Potassium dihydrogen phosphate (KH2PO4)0.5 g Ammonium sulphate (NH4)2SO40.25 g Tri-Sodium citrate (Na3citrate)1 M Magnesium sulphate heptahydrate (MgSO4.7H2O) -250 μl 25 mg/mL L-Methionine-1 ml25 mg/mL Nicotinic acid-1 ml10 mg/mL Glutamic acid-25 ml20% Glucose-12.5 ml3% Agar-100 mlPlant mimicking medium (XOM2)Stock preparation100 mM L-Methionine1 M Sodium glutamate1 M Potassium dihydrogen phosphate (KH2PO4)10 mM Manganese sulphate (MnSO4)

Bacterial media

Media

Rifr, Apr, Kmr, Gmr, Tetrand Spcrindicate resistant to rifampicin, ampicillin, kanamycin, gentamicin and spectinomycin, respectively.Table 2.2: List of oligonucleotides used in the study

hydrochloric acid, sulphuric acid, methanol, acetic acid, acetone and nitric acid were purchased from Fischer Scientific. Protease inhibitor tablets were procured from Roche. Hybond-P membranes for protein transfer were purchased from Amersham Biosciences. Taq DNA polymerase and Hi-fidelity Taq DNA polymerase were purchased from Thermoscientific and Larova, respectively. SYBR-green kit for real-time PCRwas procured from Qiagen and Thermoscientific. Superscript SS-III RT kit was obtained from Invitrogen. Random hexamers were obtained from Qiagen. Different restriction enzymes used for cloning and mutation generation were purchased from New EnglandBiolabs (NEB). Plasmid DNA purification, PCR purification, gel extraction and reaction clean up kits were procured from Qiagen. Medium components for bacterial culture viz., sucrose, agar, Luria Bertani (LB), Nutrient Agar (NA), peptone, yeast extract, beef extract, magnesium chloride hexahydrate (MgCl2.6H2O) and potassium sulphate (K2SO4) were purchased from Himedia. Table 2.1: List of strains and plasmids used in the study

Agarose, phenol, dimethyl sulphoxide (DMSO), sodium acetate, sodium carbonate, sodium bicarbonate, mangenese sulphate, tris methylamine, trizma base, sodium dodecyl sulphate (SDS), formamide, ethylenediaminetetraacetic acid (EDTA), glycerol, polyethylene glycol, tributyrin, ammonium persulphate, TEMED, acrylamide, bis-acrylamide, coomassie brilliant blue (CBB), β-mercaptoethanol, chloroform, formaldehyde, nuclease free water, diethylpyrocarbonate (DEPC), isopropanol, ferrozine, glycine, sodium lauryl sarcosine, carbonylcyanidep-trifluoromethoxyphenylhydrazone (FCCP), benzyl amino purine (BAP), ferrozine, tween-20, triton-X-100, aniline blue, trisodium citrate dehydrate, remazol brilliant blue-xylan (RBB-xylan), lactic acid, nicotinic acid, hexadecyltrimethyl ammonium bromide (HDTMA), p-nitrophenol, carboxymethyl cellulose (CMC cellulose), sodium phosphate dibasic, sodium phosphate monobasic, rubidium chloride, ferrous sulphate, ferric chloride, ammonium sulphate, 2,5-diphenyloxazol (PPO), 1,4-bis (5 phenyl 1,2-oxazole) Benzene (POPOP) and 2, 2-dipyridyl were purchased from Sigma Chemicals. Sodium hypochloride, disodium hydrogen orthophosphate dehydrate, sodium chloride, sodium hydroxid

Chemicals, kits and culture medium components

Allbacterial strains and plasmids used in this study are listed in Table 2.1

Oligonucleotides

Oligonucleotides used in this study were designed either by freely available online tool Primer3plus (http://www.bioinformatics.nl/cgi-bin/primer3plus/primer3plus.cgi/) or Generunner software. Oligonucleotides were commercially synthesized at Eurofins MWG operons, Bangalore, India. Oligonucleotides used in this study are listed in Table 2.2

Strains and plasmids

Stripping buffer100 mM β-mercaptoethanol2 % SDS62.5 mM Tris-HCl (pH 6.7)Final volume was madeto 250 ml with water

Transfer buffer (10 X stock solution)0.25 M Tris-HCl (pH8.0)1.92 M Glycine1% SDSThe stock solution was prepared asa10 X concentrate and was diluted to 1 X concentration prior to use.1X Transfer buffer (1 litre)200 ml Methanol100 ml 10X Transfer buffer700 ml WaterTris-Buffered Saline (TBS)50 mM Tris150 mM NaClFinal pHof the bufferwas adjusted to 7.4 with HCl.Blocking buffer5% Fat-free milk0.1% Tween-20Final volume was made to 100 ml with 1 X TBS.Wash buffer (TBS-T)TBS (1 X final concentration)0.1% Tween-20Final volume was prepared with water

Buffers for western blot experiment

2% DTTThe stock solution of SDS loading buffer was made asa4 X concentrateand was added to the protein sample to the final concentration of 1 X.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSThe stock solution was prepared as a 10 X concentrate and was diluted to 1 X concentration prior to use.Resolving gel mix (12%, 10 ml)3.3 ml H2O4 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix2.5 ml 1.5 M Tris-HCl (pH 8.8)100 μl 10% SDS100 μl 10% Ammonium persulfate (APS)4 μl N,N,N′,N′-Tetramethylethylenediamine (TEMED)Stacking gel mix (5%, 3 ml)2.1 ml H2O0.5 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix380 μl 1 M Tris-HCl (pH 6.8)30 μl 10% SDS30 μl 10% APS3 μl TEMED

2% DTTThe stock solution of SDS loading buffer was made asa4 X concentrateand was added to the protein sample to the final concentration of 1 X.SDS-PAGE running buffer0.25 M Tris-HCl (pH 8.0)1.92 M Glycine1% SDSThe stock solution was prepared as a 10 X concentrate and was diluted to 1 X concentration prior to use.Resolving gel mix (12%, 10 ml)3.3 ml H2O4 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix2.5 ml 1.5 M Tris-HCl (pH 8.8)100 μl 10% SDS100 μl 10% Ammonium persulfate (APS)4 μl N,N,N′,N′-Tetramethylethylenediamine (TEMED)Stacking gel mix (5%, 3 ml)2.1 ml H2O0.5 ml 30% Acrylamide:N,N’-Methylenebisacrylamide (29:1) mix380 μl 1 M Tris-HCl (pH 6.8)30 μl 10% SDS30 μl 10% APS3 μl TEMED

Total cell lysis buffer (Homogenization buffer)50 mM Tris-HCl (pH 7.5)2 mM EDTA10 mM Sodium fluoride*1 mM Sodium orthovanadate*1 X protease inhibitor cocktail (Sigma, P 8215)** Were added fresh before use.SDS-PAGE30% acrylamide solution29 g Acrylamide1 g N,N’-MethylenebisacrylamideDissolved in 100 ml H2O10% Sodium Dodecyl Sulfate (SDS)10 g SDS in 100 ml H2OSDS loading buffer130 mM Tris-HCl (pH 8.0)20% (v/v) Glycerol4.6% (w/v) SDS0.02% Bromophenol blue

Buffers for protein extraction and separation by SDS-PAGE (sodium dodecyl sulphate-polyacrylamide gel electrophoresis)

Phenol solution saturated with 0.1 M citrate buffer (pH 4.3 ± 0.2)was procured from Sigma (P4682)

Buffer C100 mM Tris-HCl (pH 7.5)10 mM EDTA10% SDSPhenol:Chloroform:Isoamyl alcohol (25:24:1) solution25 ml Tris-equilibrated phenol (pH 8.0)24 ml Chloroform1 ml Isoamyl alcoholDNA sample loading buffer0.25% Bromophenol blue0.25% Xylene cyanol15% FicollStock solution of the loading buffer was prepared in water as a 6 X concentrate and was added to the sample DNA to the final concentration of 1 X.RNA isolation bufferAE buffer3 M sodium acetate0.5 M EDTA (pH 8.0)Reagents used for RNA isolation were prepared in DEPC-treatedwater and stored at 4°C. For preparationof DEPC-treated water,0.1 ml DEPC was added to 100 ml waterand kept overnight onamagnetic stirrer. Followingincubation,the solution was autoclaved to remove any traces of DEPC.Acid phenol solution

Genomic DNA isolation buffersBuffer A50 mM Tris-HCl10 mM EDTA150 mM NaCl1% Triton-X1% SDSBuffer B50 mM Tris-HCl (pH 7.5)10 mM EDTA1.1 M Sorbitol50 mM β-mercaptoethanol (Added freshbefore use)

Buffers used for nucleicacid extraction

10 mg/ml carrier DNA 5 μlAbove-mentioned reagents were added to prepare thetransformation mixture, and the volumes indicated wereused per transformation.500-1,000 ng of desired transforming DNA was added to this transformation mixture and final volume was adjusted to 360 μl with sterile water.Carrier DNA (Sonicated salmon sperm DNA, Stratagene, 201190) washeat denatured at 95⁰C for 10 min and transferred on ice before additionto the transformation mixture.43 μl DMSO was added to each transformation mixture before heat shock.Zymolyase cocktail buffer for yeast colony PCR2.5 mg/ml zymolyase (MP Biomedicals, 0832092)1.2 M SorbitolThe cocktail was prepared in sterile water

Tris-acetic acid EDTA (TAE) buffer40 mM Tris Base0.5 M EDTAFinal pHof the bufferwas adjusted to 8.5 with glacial acetic acid.TAE buffer was prepared as a 50 Xconcentrate and diluted to 0.5X concentration prior to use as agarose gel electrophoresis running buffer and to cast agarose gels.HEPES [4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid] buffer1 M HEPESFinal pHof the bufferwas adjusted to 7.5 with NaOH.HEPES was used as a buffering agent forpreparationof different pHmedium. Buffer was filter-sterilizedby usinga0.22 μm membrane filterand stored at 4°C.INOUE transformation buffer10 mM PIPES15 mM CaCl2.2H2O250 mM KCl55 mM MnCl2.4H2OFor preparation ofINOUE transformationbuffer,above-mentioned solutes were dissolved in appropriate amount in 800 ml of water and then 20 ml of 0.5 M PIPES(piperazine-1,2-bis[2-ethanesulphonic acid])(pH 6.7) was added. Final volume was adjusted to 1 litre with water, buffer was filter sterilized by usinga0.22 μm membrane filter and stored at -20°C. Stock solution of PIPES was preparedseparatelyby dissolving 15.1 gm of PIPES in 80 ml of water, pH was adjusted to 6.7 using 5 M KOH and volume was adjusted to 100 ml.Yeast transformation reagents1 M lithium acetate 36 μl50 % polyethylene glycol 240 μl

Phosphate-Buffered Saline (PBS)137 mM NaCl2.7 mM KCl10 mM Na2HPO42 mM KH2PO4Final pH of the buffer was adjusted to 7.3with 11.6 N HCland volume was adjusted to 1 Lbefore autoclaving.PBS was prepared as a 10X stock solution and diluted to 1 X concentration before autoclaving.Tris-HCl buffer0.5 M Trizma BaseFinal pHof the bufferwas adjusted to 7.6 using 11.6 NHCl.Tris-EDTA (TE) buffer10 mM Tris-HCl (pH 8.0)1 mM EDTATE buffer was prepared as a 10 X concentrate and diluted to 1 X concentration before use

Common buffers

Buffers and solutions

Casamino acid (CAA)0.67% Yeast Nitrogen Base2% Dextrose0.6% Casamino acid

Yeast Extract-Peptone-Dextrose (YPD)1% Yeast Extract2% Peptone2% DextroseYeast Nitrogen Base (YNB)0.67% Yeast Nitrogen Base2% DextroseFor alternate carbon source utilization experiments, dextrose was replacedwith other carbon sources viz.,ethanol, glycerol, oleic acid and sodium acetate.Ethanol, oleic acid and sodium acetate were used at afinal concentration of 2%and glycerol was used at a final concentration of 3%

Yeast media

2.5 mM KCl10 mM MgCl210 mM MgSO4SOCSOB mediumwas modified to prepare the SOC medium.20 ml of sterile 1 M glucose solution was added to the autoclaved SOB medium to obtainafinal concentration of 20 mM glucosein 1 litre of medium.AntibioticsAmpicillin 60 μg/mlKanamycin 30 μg/mlStock solution of antibiotics (50 mg/ml) were prepared in sterile water. Prior to storage at -20°C,antibioticswere filter sterilizedthrougha0.22 μm membrane filter. Before pouring the plates,antibiotics were added to moderatelywarm LB-agar medium

Luria Bertani (LB)0.5% Yeast Extract1% Tryptone1% NaClSuper Optimal Broth (SOB)0.5% Yeast Extract2% Peptone10 mM NaCl

Allmedia and solutions were sterilizedby autoclaving at 121°C and15 psi for 20 min.For preparation of plates,2% agar was added to the medium before autoclaving.Heat labile components and reagents were filter sterilizedby passing them through a 0.22 μm membrane filter

Bacterial media

Media

dipotassium hydrogen phosphate, disodium hydrogen orthrophosphate, acetone and citric acid were obtained from Qualigen Chemicals. Kitused for quantitationof histone deacetylase activity waspurchased from Cayman Chemical Company (#10011563). Hybond-P membranefor protein transferand ECL kit for immunoblottingwere purchased from Amersham Biosciences. Kits used for estimation of cytokines were procured fromBD Biosciences.Medium components used to culture C. glabrataand bacterial strains viz.,yeast extract, peptone, dextrose, casamino acid hydrolysate, yeast nitrogen base with aminoacids and ammonium sulphate, yeast nitrogen base without amino acids, yeast nitrogen base without aminoacids and ammonium sulphate and Luria-Bertani (LB) medium were purchased from BD (Becton, Dickinson and Company, USA). Animal cell culture media RPMI-1640, DMEM and α-MEM were purchased from Hyclone and Gibco-Invitrogen. Fetal bovine serum, glutamine and antibiotics for cell culture medium were procured from Gibco-Invitrogen

Allchemicals used in thisstudy were obtained from commercial sourcesand were of molecular biology grade. The enzymes used for PCR amplification and molecular cloning viz.,restriction endonucleases, T4DNA ligase, Taq DNA polymerase were obtained from New England Biolabs, Fermentas, Sigma and Finnzymes. Kits used for first strand c-DNA synthesis, quantitative real time-PCR were purchased from Invitrogen andEurogentech, respectively.Kits used forplasmid isolation,PCR product purification, reaction clean up, and gel extraction of DNA fragmentswere procured fromQIAGEN.Agarose, phenol, dimethyl sulphoxide (DMSO), sodium acetate, sodium chloride, sodium hydroxide, sodium carbonate, sodium dodecyl sulphate (SDS), trizma base, bathophenanthrolinedisulfonic acid disodium salt (BPS), ferric chloride, formamide, ethylenediaminetetraacetic acid (EDTA), glycerol, polyethylene glycol, hydroxyurea, methylmethane sulphonate (MMS), ammonium persulphate, acrylamide, bis-acrylamide,N,N,N′,N′-Tetramethylethylenediamine(TEMED), diethylpyrocarbonate (DEPC), lithium acetate, polyethylene glycol (PEG), menadione, phorbol myristate acetate (PMA), isopropanol,tween-20, trypan blue, hydrogenperoxide, uracil and orthrophenylenediamine (OPD) were procured form Sigma Chemicals. INVIVO PROTWIN label mix, S35(Met:Cys-65:25) were obtained from from BRIT-Jonaki, CCMB, Hyderabad. Fluconazole was purchased from Ranbaxy.Ferrozine was purchased from HIMEDIA.Hydrochloric acid, sulphuric acid, acetic acid, methanol, potassium dihydrogen orthrophosphate,

Chemical components, culture mediumand kits

Table 2.4: List of antibodies used in thisstudy

All antibodies used in thisstudy, their clonality and dilutions used,Manufacturers’ details,and catalogue numbersare listed in Table 2.4

Antibodies

Oligonucleotides used for generation of C. glabratadeletion strains, for cloning and for quantitative Real time Polymerase Chain Reaction (qPCR)were commercially synthesized either at MWG Biotech Pvt. Limited, Bangalore, India or at Xcelris genomics Pvt. Limited, Ahemdabad, India. All the oligonucleotides used were designed by using freely available online tool Primer 3 plus (http://www.bioinformatics.nl/cgi-bin/primer3plus/primer3plus.cgi/) and are listed in Table 2.3

Oligonucleotides

All C. glabrataand bacterial strains,and plasmids used in thisstudy are listed in Table 2.1 and Table 2.2, respectively.Table 2.1: List of C. glabrataand bacterial strains used in the study

Strains and plasmids

3.4 mL H200.63 mL 30% acrylamide solution (acrylamide:bis-acrylamide; 29:1)0.83 mL 1 M Tris (pH 6.8)0.05 mL 10% SDS0.05 mL 10% ammonium persulfate (APS)0.005 mL N,N,N',N'-Tetramethylethylenediamine (TEMED)Resolving gel solution (12%)10 mL3.3 mL H204 mL 30% acrylamide solution (acrylamide:bis-acrylamide; 29:1)2.5 mL 1.5 M Tris (pH 8.8)0.1 mL 10% SDS0.1 mL 10% ammonium persulfate0.004 mL N,N,N',N'-Tetramethylethylenediamine (TEMED)SDS-Running buffer(Tris/Glycine/SDS)25 mM Tris-Cl192 mM glycine0.1% SDSTransfer Buffer25mM Tris-Cl190 mM glycine20% MethanolMTT dyeMTT dye was dissolved in PBS at 5 mg/mL concentration. Filtered through 0.45 μm syringe filters, and stored in dark at 4ºC

Hypotonic lysis buffer10mMTris Cl (pH 7.4)2.5mM MgCl2, 1mM PMSF 0.5% NP-40Hypotonic bufferPrewarmed 0.075 M KCl Fixatives used in this study100% ethanol kept overnight at -20ºCfor immunofluorescence by prelysis protocol70% ethanol kept overnight at -20ºCused for PI based cell cycle analysisMethanol: glacialactetic acid (3:1) for cytogenetic analysis4% Paraformaldehyde-4 g of paraformaldehyde dissolved in 100 mL waterPI staining solutionPBS containing, 0.1% Triton X-1000.2 mg RNase 20μg propidium iodideReagents required for Tris-Glycine SDS-PAGESDS-PAGE 30% Acrylamide solution29 g of acrylamide and 1 g bi-acrylamide (29:1 ratio) dissolved in 100 mL water10% SDS10 g SDS dissolved and 100 mL waterLaemmli buffer40% Glycerol 240 mM Tris/HCl pH 6.8 8% SDS 0.04% bromophenol blue 5% beta-mercaptoethanolStacking gel solution (5%) 5mL

Buffers

Antibodies

Table 2.3: Antibodies used in this study

Click-iT cell proliferation kit (C35002, Invitrogen), Apo-BrdU TUNEL assay kit (A35127, Invitrogen)

Kits

Cell culture reagents: fetal bovine serum (FBS, 26140-079), L-glutamine (25030-081), penicillin-streptomycin (15140-122) and trypsin (25200-056) were from Life Technologies. DNA damaging agents used for this study were obtained from following sources: hydroxyurea (HU; H8627, Sigma-Aldrich), neocarzinostatin (NCS, N9162, Sigma-Aldrich), mitomycin C (M0503, Sigma-Aldrich). Reagents used for cell spreading assays: methyl cellulose (Sigma-Aldrich), fibronectin (F2006, Sigma-Aldrich)andfluorophore conjugated phalloidin (Molecular Probes Inc).Antibiotic selection markers: puromycin (Sigma-Aldrich), G418 (Sigma-Aldrich), transwell inserts (24 well, 8 μm pore size, Costar, Corning), Invasion chambers (BioCoat Matrigel invasion chamber, 24 well, 8 μm pore size, Corning). Other chemicals: Propylene glycol (151957, MP Biomedicals), 4-Nitroquinoline-1-Oxide(4NQO; N8141, Sigma-Aldrich), MTT [(3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide], TNP [N2-(m-(trifluoromethy)lbenzyl)N6-(p-nitrobenzyl)purine],DMSO (dimethyl sulfoxide), ethanol, paraformaldehude, vectashield DAPI (Vector labs),Tris, PMSF, NP-40, PBS, Tween-20, BSA, MgCl2, colcemid, KCl, methanol, glacial acetic acid, giemsa, SDS, sodium bicarbonate (S5761, Sigma-Aldrich),polyfect transfection reagent, crystal violet, propidium iodide, Triton X-100 and PEI were obtained from Sigma-Aldrich. Low melting agarose (Difco), ECL detection system (GE Healthcare)

Chemicals

All animal experiments were conducted as per guidelines provided by the Committee for the Purpose of Control and Supervision of Experiments on Animals, Ministry of Environment, Forest, and Climate Change, Government of India,and these experiments were approved by the Institutional Animal Ethics Committee (Protocol numbers PCD/CDFD/02-version 2 and PCD/CDFD/08). Mice used for this study were housed in the Centre for DNA Fingerprinting and Diagnostics animal facility located within the premises of Vimta Labs, Hyderbad.Ip6k1+/-heterozygous mice were bred to generate age and sex matched Ip6k1+/+and Ip6k1-/-littermates for experiments. Foxn1numice were generated by breeding homozygous males with heterozygous females.These mice were used for in vivotumourigenic assays

Mice

Other plasmids used for lentivirus generation: VSV-G, VSV-GP (gifts from Dr. Renu Wadhwa, AIST, Japan) and psPAX2 (a gift from Dr. Didier Trono, Addgene plasmid # 12260)

Plasmids

Table 2.2:Plasmids expressing shRNAagainst mouse Ip6k2used for generating stable cells in MEFs are listed below

Lentiviral vectors (pLKO.1)encoding various shRNA sequences against human IP6K1and mouse Ip6k2were obtained from Sigma-Aldrichto generate transient and stable knockdowns. shRNA clone IDs and their representation in the thesis are given below.Table 2.1:Plasmids expressing shRNA against human IP6K1used for generating stable cells in HeLa and HCT116

Celllines

The cell lines used in the study are mouse embryonic fibroblasts (MEFs) derived from wild type (WT) and Ip6k1knockout mouse embryos. The MEFs were immortalized with SV40 large T antigen (Bhandariet al., 2008)and single cell derived lines were generated in the lab. Ip6k1knockout MEFs display 70% lower levels of IP7compared with wild type MEFs (Bhandariet al., 2008). Ip6k1-/-MEFs expressing kinase active or inactive forms of IP6K1 were generated in the lab (Rescue MEFs). MEFs were maintained in Dulbecco’s modified Eagle’s medium (DMEM, Life Technologies) supplemented with 10% fetal bovine serum (FBS, Life Technologies), 1 mM L-Glutamine (Life Technologies), 100U/mL penicillin, and 100 μg/mL streptomycin (Life Technologies).Rescue MEFs were cultured in complete DMEM supplemented with G418 (200 μg/mL) as selection marker. HCT116 (colon cancer cells, a gift from Dr. Sagar Sengupta, NII, New Delhi) or HeLa (cervical cancer cells) expressing non-targeting control and shRNA against human IP6K1were cultured in complete DMEM containing puromycin (2μg/mL). The amphotropic Phoenix cells (a gift from Dr. Shweta Tyagi, CDFD, Hyderabad) and HEK293T packaging cells were usedfor generating lentiviral particles containing shRNA against human IP6K1or mouse Ip6k2and were maintained in complete DMEM