Blood was drawn from appropriate source into heparinised tubes. The blood sample was centrifuged at 4000 rpm for 15 min ( 4 °C). The supernatant was discarded, and the erythrocytes (pellet) were subsequently washed thrice with chilled isotonic buffer [0.01 M PBS (pH 7.4)] by centrifugation at 4000 rpm and 4°C for 15 min. The washed erythrocytes were lysed in water. The resultant red cell lysate was then dialyzed extensively against PBS (pH 7.4) at 4°C to obtain stripped hemoglobin (hemoglobin devoid of bound allosteric modulators like BPG). The stripped hemoglobin was then loaded onto a pre-equilibrated DE52 column (30cm x 15cm) after extensive dialysis against 0.05 M tris acetate buffer (pH 8.5). The protein was eluted from the column employing a linear gradient of 500 ml each of 0.05 M tris acetate (pH 8.5) and 0.05 M tris acetate (pH 7) at a flow rate of 50 ml/hour. The purified hemoglobin was estimated spectrophotometrically at 540 nm (molar extinction coefficient= 53236 cm-1/M) and stored at -70°C till further use.

20 mg/ml X-gal in dimethylformamide Solution A as 40 mM potassium ferricyanide. Solution B as 40 mM potassium ferrocyanide. Solution C as 200mM magnesium chloride. 10X fixative (20% formaldehyde; 2% glutaraldehyde in 10X PBS) 10X PBS as 0.017 M KH2PO4, 0.05 M Na2HPO4, 1.5 M NaCl, pH 7

Lysis Buffer: 0.1% Triton X-100/0.1 M Tris-HCl (pH 8.0). 450 ml distilled water 50 ml 1M Tris-HCl (pH 8.0) 0.5 ml Triton X-100 detergent • 100X Mg++ solution: 0.1 M magnesium chloride 4.5 M 2-mercaptoethanol Stored at 4°C. • 0.1 M sodium phosphate (pH 7.5)41 ml 0.2 M Na2HPO4 9 ml 0.2 M Na H2PO4 50 ml distilled water • 4 mg/ml ONPG (o-nitrophenyl-β-D-galactopyranoside) in 0.1 M sodium phosphate (pH 7.5) containing 2 mM β-mercaptoethanol, Stored at –20°C. • 0.1 mg/ml β-gal standard: 0.1 mg/ml β-gal in 0.1 M sodium phosphate (pH 7.5) containing 2 mM 2-mercaptoethanol Stored at 4°C. • 1 M sodium carbonate in water

stored. To prepare competent cells pre-inoculum was prepared. A single bacterial colony was picked from LB agar plate, inoculated into 3 ml LB medium, and incubated overnight at 37°C temperature with shaking at 200 rpm. 1% of this pre-inoculums was sub cultured in 100 ml LB-broth and incubated at 18°C with shaking until OD at 600nm reached 0.5 - 0.6 (approx.). Culture was kept on ice for 10 min. with constant shaking.Cells were pelleted by centrifugation at 2000 g at 4°C for 8 min. Pellet was resuspended in 40 ml of ice-cold TB buffer. Bacterial suspension was kept on ice for 30 min, re-spun at 2000 g at 4°C for 8 min. Pellet was resuspended in 8 ml of TB buffer in which final concentration of DMSO was 7% and left on ice for 10 min. 100 μl aliquots were made and snap frozen in liquid nitrogen and stored at -80°C

All the salts (10 mM PIPES, 15 mM CaCl2.2H2O, 250 mM KCl, 55 mM MnCl2.2H2O) except MnCl2 were dissolved in milliQ water and pH was adjusted to 6.7 with 1N KOH. MnCl2 was dissolved separately in mill Q water. MnCl2 was added drop wise while stirring (MnCl2 if added directly will give a brown color to the solution and precipitate out, hence it needs to be dissolved separately). Solution was then filter sterilized and

microfuge tubes and snap frozen in liquid nitrogen and were stored at ─80 ̊C. Protein estimation was performed simultaneously with one of these aliquots

The strains were grown to stationary phase in 500 ml LB supplemented with ampicillin (100 μg/ml) overnight. Cells were pelleted at 2100g for 30 min at 4 ̊C and dissolved in 5 ml of 1X PBS with 2X protease inhibitor and 3 mM DTT. Cells were lysed using French Press at 1500 psi for three cycles. The lysed cells were pelleted at 20,000g for 45 min at 4 ̊C. Clear supernatant was collected in sterile 2 ml

For routine plasmid transformations, where high efficiency is not required, the following method which is a modification of that described by Sambrook and Russell (2001) was used. An overnight culture of the recipient strain was subcultured in fresh LB and grown till mid-exponential phase. The culture was chilled on ice for 15 min, and the steps hereafter were done on ice or at 4°C. The culture was centrifuged, and the pellet was resuspended in one third volume of cold 0.1 M CaCl2. After 15 min incubation on ice, the cells were again recovered by centrifugation, and resuspended in one tenth volume of cold 0.1 M CaCl2. The suspension (0.1 ml) was incubated on ice for 1 h after which DNA was added (~10-100 ng of DNA in less than 10 μl volume). The mixture was again incubated on ice for 30 min, and then heat shocked for 90 seconds at 42°C. Immediately 0.9 ml of LB broth was added to the tube and incubated at 37°C for 45 min for phenotypic expression of the antibiotic marker before being plated on selective medium at various dilutions. A negative control tube (with no plasmid DNA addition) was also routinely included in each of the experiments

and the aqueous phase transferred to a fresh tube. The aqueous phase was further extracted successively, first with phenol:chloroform:isoamyl alcohol (25:24:1) and then with chloroform:isoamyl alcohol (24:1). DNA was precipitated from the clear supernatant by the addition of 0.6 volumes of isopropanol. The chromosomal DNA was either spooled out or pelleted at this stage, washed with 70% ethanol, air-dried, and dissolved in suitable volume of TE buffer

The method as described in the manual Current Protocols in Molecular Biology was followed for preparation of chromosomal DNA. Cells from 1.5 ml stationary phase culture were recovered by centrifugation and resuspended in 567 μl of TE buffer. To this, 30 μl of 10% SDS, and 3 μl of proteinase K (20 mg/ml) were added in that order and the cell suspension mixed and incubated at 37°C for 1 h. Next, when the suspension looked cleared, 100 μl of 5 M NaCl was added, thoroughly mixed, followed by the addition of 80 μl of CTAB/NaCl (10% cetyltrimethylammonium bromide in 7 M NaCl) and vigorous mixing (by inverting the microfuge tube). The suspension was incubated at 65°C for 10 min, brought to room temperature, extracted with an equal volume of chloroform-isoamyl alcohol (24:1 v/v)

Extraction of chromosomal DNA from bacterial cells

high osmolarity conditions (Gowrishankar, 1989; Csonka, 1989) for β-galactosidase assay

Assays for determination of β-galactosidase enzyme activity in cultures were performed as described by Miller (1992) after permeabilizing the cells with SDS/chloroform, and the activity values were calculated in Miller units, as defined therein. For determination of proU activity from a proU::lac fusion that contains the proUpromoter cloned upstream of the lacZYA genes (as in plasmid pHYD272), cultures used were grown in LBON or K-medium (low osmolarity medium) since proU is also induced under

β-Galactosidase assay

The galEp3 (galE490∗)mutation represents a 1.3 kb IS2 insertion in the gal leader region (between the promoter and structural genes of the galETKM operon). The mutation causes transcriptional polarity on the structural genes due to rho dependent transcription termination within IS2. In this assay, the gal operon expression in a galEp3mutant or its derivatives was monitored by one of two means. In the first, MacConkey galactose indicator plates (with 1% galactose) were used, where Gal+ colonies are red, and Gal− colonies are white. Therefore, the depth of color serves as an indicator of relative levels of gal expression. In the second method, growth of strains on minimal-galactose (0.2%) was used as a test for Gal+ phenotype

Lac+ colonies were distinguished from Lac− on MacConkey-lactose plates or on Xgal indicator plates. Xgal is a non-inducing colourless substrate of β-galactosidase enzyme which upon hydrolysis yields dark blue indolyl moieties and hence, the Lac+ colonies on Xgal indicator plates are seen as dark blue colonies. Xgal was prepared as a stock solution of 5 mg/ml in dimethyl formamide and used at a final concentration of 25 μg/ml. On MacConkey-lactose medium (pH around 7.1) on the other hand, Lac+ strains can utilize the lactose sugar present in the medium to lower the pH of the medium to 6.8, resulting in a pink coloured colony while Lac─ strains are unable to utilize lactose to give a white colour

A single plaque of λ contains approximately 105-106 pfu/ml. The method of propagation of λ from a single plaque was as follows. The contents of a single isolated plaque were drawn into a 1-ml pipette tip and dispensed into 0.2 ml of LB broth. After addition of a drop of chloroform, the contents were vortexed and centrifuged. The clear supernatant was mixed with 50 μl of λ-sensitive cells and incubated for 20 min at room temperature for adsorption. 10 ml of Z-broth supplemented with 5 mM MgSO4 was then added to the infection mixture, and incubated at 37°C with shaking until lysis. The lysate thus obtained usually contained 109pfu/ml

To 0.3 ml of infection mixture, 10 ml of Z-broth was added and incubated at 37°C with slow shaking until growth followed by the visible lysis of the culture occurred (in ~ 4-6 h). The lysate was treated with 1 ml of chloroform, centrifuged and the clear lysate was stored at 4°C with chloroform

require high fidelity,Taq DNA Polymerase from MBI Fermentas was used. However,for precise amplifications either Herculase Fusion or PfuDNA polymerasefrom Stratagene was used. Approximately, 10-20ng of plasmid or 100 to 200 ng ofchromosomal DNA was used as a template in a 50 μl reaction volume containing 200μM of each dNTP, 20 picomoleeach of forward and reverse primer and 1.5 units of DNA polymerase.In the case of colony PCR performed to examine multiple colonies for presence of the plasmid clones, E. coli cells from afreshly grown plate wereresuspended in 50 μl of sterile Milli-Q water to get a cell suspension (~109cells/ml)and 4 μl from this was usedas the source of DNA template. To verify various pMU575 clonesdescribed in this study, by colony PCR,the vector specific primer pairs JGJpMUF and JGJgalK were used. The expected amplicon for pMU575 alone is ~300-bp, while that carrying the cloned fragment would be >300-bp.For each PCR reaction, the samples were subjected to 30-cycles of amplification and the typical conditions were as follows (although there were slight alterations from one set of template/primerto another):The initial denaturation was carried out at 95°C for 4-min and the cycle conditionswere as given below:Annealing 45ºC to 50°C 1-minExtension 68°C (1-min/kb of DNA template to be amplified)Denaturation 95°C 1-minAfter 30 cycles of PCR, the final extension step was carried out again for 10-min at68°C

For amplification of short length (100-200-bp)DNA fragmentsor that do not

Polymerase chain reaction (PCR)

argP+, argPd-S94L, argPd-P108S, argPd-P274Sfragment downstream of the phage T7-promoter, such that the encoded proteins beara C-terminal His6-tag provided by the vector DNA sequence. Theresultant plasmid was transformed into strain BL21(DE3) which has the T7 RNA Polymerase under the isopropyl thio-β-D-galactoside (IPTG) inducible lacUV5promoter.The resultant strains were grownin LB (500-1000 ml) to an A600of around 0.6and were then induced with 1 mM IPTG and harvested after 4-hrs of induction.Bacterial cells were recovered by centrifugation, resuspended in 20 ml of lysis buffer(20 mM Tris-Cl, pH-8; 300 mM NaCl; 10 mM DTT and 10 mM imidazole) containing20 μg/ml lysozyme, and lysed by sonication with 30-sec pulses for 10-min. Theprotocol for His6-ArgP(ArgPds)protein purification involved (i) passing the lysate through a 5ml Ni-NTA (Qiagen) chromatographic columnequilibrated with lysis buffer, (ii) washing thecolumn with 100 ml of washing buffer (20 mM Tris-Cl, pH-8; 300 mM NaCl; 10 mMDTT; 30 mM imidazole), and (iii) elution of His6-ArgP(ArgPds)from the column with elutionbuffer (20 mM Tris-Cl, pH-8;300 mM NaCl; 10 mM DTT and 250 mM imidazole) andcollection of 1.5 ml eluate fractions (10 fractions). The fractions were tested forprotein by Bradford method and the protein-carrying fractions (generally tubes 2 to 5)were pooled and dialysed in a 1:200 volume ratio against 20 mM Tris-Cl, pH-8 with 10mM DTT, 300 mMNaCl for 5 hrs followedby a change to buffer of composition 20 mM Tris-Cl, pH-8 with 10 mM DTT, 300 mM NaCl and 40% glycerol for 24 hrs. The proteins were concentrated by centrifugation toaround 1 mg/ml by using Amicon filter (pore size 10-KDa) and stored at −20ºC or −70ºC

For preparing ArgP and ArgPd-S94L, -P108S and -P274S proteins, derivatives(designated as pHYD1705, pHYD2678, pHYD2679 and pHYD2680 respectively) of the plasmidvector pET21b (Novagen) was constructed which carries the PCR-amplified

werethen recovered by centrifugation at 12,000 rpm for 30-min. The pellet was washed oncewith 70% ethanol, air-dried and re-suspended in 100 μl of TE-buffer. It was treatedwith RNase at a concentration of 20 μg/ml by incubating at 37ºC for 1-hr. It was furtherextracted with an equal volume of phenol:chloroform mixture followed bychloroform:isoamyl alcohol (24:1) mixture. After centrifugation, the clear supernatantwas used for recovering the nucleic acids. The nucleic acids were precipitated with 200μl of alcohol in presence of 0.3 M sodium acetate (Sambrook and Russell, 2001). In casewhere high purity plasmid preparations are required (DNA sequencing) the plasmidisolation was carried out with the commercially available kits following themanufacturer’s instruction. Plasmids were observed on 1% agarose gel

1.5 ml of cells from an overnight culture waspelleted by centrifuging in cold (4ºC) for10-min at 6000 rpm. The cells were re-suspended in 200 μl solution I (50 mM glucose; 25 mM Tris-Cl, pH-8; 10 mM EDTA, pH-8) with vortexing. 400 μl of freshly preparedsolution II (0.2% NaOH, 1% SDS) was added and mixed by gently inverting the tubes.Subsequently, 300 μl of solution III (prepared by mixing 60 ml of 5 M CH3COOK,11.5 ml glacial acetic acid, 28 ml water) was added and the tubes were invertedrepeatedly and gently for homogeneous mixing followed by incubation for 5-min onice. After centrifuging at 12,000 rpm for 15-min, supernatant wasdecanted into a freshtube, an equal volume of iso-propanol was added, the precipitated nucleic acids

A differential gene expression microarray with respect to argP was performed by Genotypic Technology Pvt.Ltd., Bengaluru. The experiment was performed on an oligonucleotide microarray having 10828 probes for coding region(on average three probes were designed for each 4294 coding regions) and 4380 probes for non-coding region (on average two probes were designed for 2240 non-coding regions). The RNA was labelled using Cy3 and single channel detection was used. Data was analysed using GeneSpring GX Version 7.3

supplemented with amino acids and appropriate antibiotic and grown at 37ºC to an A600of 0.5-0.6. Around 0.1-0.5 ml of culture was made up to 1 ml with Z-buffer and lysedwith addition of one drop of chloroform and 1-2 drops of 1% SDS solution. 0.2 ml offreshly prepared 4 mg/ml ONPG was added to start the reaction and incubated at roomtemperature till the color of the reaction mixture turned yellow. 0.5 ml of 1 M Na2CO3was added to stop the reaction and the time duration from initial addition of ONPG tothe stopping of reaction was noted.The absorbance of reaction mix was taken at 420nm and 550 nm. The A600of the culture used was also noted. The enzyme specificactivity (in Miller units) was calculated using following equation:β-galactosidase specific activity = [1000 X A420-(1.75 X A550)] / t X v X A600Where t isthe time period in minsand v the volume of culture used in ml.Each value reported is the average of at least three independent experiments, and the standard error was <10% ofthe mean in all cases

β-galactosidase assay was performed according to Miller (1992). An overnight grownculture of the bacterial strain was sub-cultured in glucose Minimal A medium

Thialysine or thiosine (S-Aminoethyl-L-cysteine)is a toxic analog of Lys. Strains were testedfor sensitivity/resistance to thialysine by streaking them on minimal A-glucose platessupplemented without and with100-200 μg/ml thialysine(Steffes et al., 1992)

For testing ArgR+/–phenotype, the colonies werestreaked on minimal A-glucose plates containing uracil (40 μg/ml) and CAN(65 μg/ml). Uracil wasadded to the medium to sensitize an argR+strain to CAN. An argR+strain is inhibited at65 μg/ml CANon a uracil-containing plate, whereas on a plate without uracil, argR+would grow even at 700-800 μg/ml CAN. Uracil represses the carAB transcription, whichencodes the carbamoyl phosphate synthase enzyme (CarAB). This results in reducedamounts of carbamoyl phosphate, which is the common intermediate between pyrimidineand Arg biosynthetic pathways. Reduced carbamoyl phosphate levels would result indecreased flux through the Arg biosynthetic pathways. This in turn would result indecrease in Arg pools inside the cell. An argR mutant would be derepressed for the Argbiosynthetic pathway and is resistant even to 300 μg/ml CANin a uracil-containing plate

CAN is a toxic analog of Arg and is an inhibitor of bacterial growth. Strains were tested for sensitivity/resistance to CAN by streaking them on minimal A-glucose platessupplemented withoutand with40 μg/ml CAN(or other concentrations as indicated) and 40 μg/ml uracil

The colonies to be tested were streaked on the surface of minimal A-glucose plates containing either 0.4-0.7 M NaCl with 1 mM glycine betaine, and incubated at 37oC. NaCl-tolerant strains grew toform single colonies in 36-60 hrs whereas NaCl-sensitive ones did not. As controls, MC4100 (WT) and other previously identified NaCl sensitive mutants were streakedfor comparison

NaCl-sensitivity testing

agar platesLac+colonies will appear dark pink colonies whereas Lac–will remain colourless

Competent cells for high efficiency transformations were prepared by a method ofInoue et al. (1990) with few modifications. An overnight culture of the strain (routinelyDH5α) was sub-cultured into fresh sterile LB-brothin 1:100 dilutions and grown at 18ºC to an A600of 0.55. The cells were harvested by centrifugation at 2500 rpm for 10-min at 4ºC. This was re-suspended in 0.4 volumes of INOUE buffer and incubated inice for 10 min. The cells were recovered by centrifugation at 2500 rpm at 4ºC for 10-min and finally re-suspended in 0.01 volume of the same buffer. Sterile DMSO wasadded to a final concentration of 7%. After incubating for 10-min in ice, the cells werealiquoted in 100 μl volumes, snap frozen in liquid nitrogen and stored at –70ºC

For routine plasmid transformations, following method which is modification of thatdescribed by Cohen et al. (1972) was used. An overnight culture of recipient strain wassub-cultured 1:100 in fresh LB medium and grown till mid-exponential phage. Theculture was chilled on ice for 15-min, and the steps thereafter were performed at 4ºC.20 ml of culture was centrifuged and pellet was re-suspended in 10 ml of 0.1 M CaCl2.After 15-min of incubation on ice, the cells were again centrifuged and re-suspended in2 ml of 0.1 M CaCl2. The suspension was incubated on ice for 30-min. To the 200 μl aliquot of the cell suspensionplasmid DNA (20 to 200 ng in less than 10 μl volume)was added, incubated for half an hron ice and given a heat shock for 90-sec at 41ºC.The cultures was rapidly chilled, mixed with 0.8 ml of LB-broth and incubated at 37ºCfor 1-hr, and plated on an appropriate selective medium at various dilutions. An aliquotof cell suspension to which plasmid DNA was not added served as a negative control

the infection mixture was centrifuged, washed in 5 ml of citratebuffer and plated without phenotypic expression

To 2 ml of fresh overnight culture of recipient strain, 108pfu equivalent of phage lysatewas added and incubated at 37ºC without shaking for 15-min to facilitate phageadsorption. The un-adsorbed phage particles were removed by centrifugation at 4000rpm for 5-min and pellet of bacterial cells was re-suspended in 5 ml of LB-brothcontaining 20 mM sodium citrate to prevent further phage adsorption. This wasincubated for 30-min at 37ºC without shaking to allow the phenotypic expression of theantibiotic resistance gene. The mixture was then centrifuged, and the pellet was resuspendedin 0.3 ml citrate buffer. 100 μl aliquots were plated on appropriate antibioticcontaining plates supplemented with 2.5 mM sodium citrate. A control tube withoutaddition of P1 lysate was also processed in the same way. In the case of selection ofnutritional requirement,

0.3 ml of overnight culture of the donor strain in Z-broth was mixed with 107plaqueforming units (pfu) of a stock P1 lysate prepared on strain MG1655. Adsorption wasallowed to occur at 37ºC for 20-mins. To 0.3 ml of infectionmixture, 10 ml of Z-broth was added and incubated at 37ºC withslow shaking until the visible lysis of the culture occurred (in 4-6 hrs). The lysate wastreated with 0.3 ml of chloroform, centrifuged and the clear lysate was stored at 4ºCwith chloroform.Preparation of P1 lysates on recA mutant strains were also donesimilarly, but with a higher multiplicity of infection (i.e. 108starter P1 phage).To quantitate the P1 phage lysate preparation, titration was done using P1 phagesensitive indicator strainsuch as MG1655. 100 μl each of dilution of phage (typically10–5, 10–6) were mixed with 0.1 ml of fresh culture grown in Z-broth. After 15-min ofadsorption at 37ºC without shaking, each mixture was added on a soft agar overlay ofZ-agar plates and incubated overnight at 37ºC. The phage titer was calculated from thenumber of plaques obtained on the plates

For SEM, C. glabratacells were fixed for 24 h in 2.5% glutaraldehyde in phosphate buffer (0.1 M, pH 7.2) at 4 ̊C, post-fixed in 2% aqueous osmium tetroxide for 4 h and dehydrated. After drying to critical point, mounted samples were coated with a thin layer of gold for 3 min using an automated sputter coater and visualized by SEM (JEOL-JSM 5600)

Yeast cell wall was isolatedas describedpreviously(De Groot et al., 2004). Briefly, cells grown underdifferent environmental conditions were harvested at 5,000 g for 5

Crude fractionation of total membraneswas carried outviadifferential centrifugation asdescribed previously (Moranoand Klionsky,1994)with slight modifications. Cells grown tolog-phase in YPDmedium werecollected, washed,normalizedto 10 OD600and resuspendedin 1 ml spheroplast buffer containing 1-2mg of zymolyase20T (MP Biomedicals).Following incubation at 30 ̊Cfor 30-45 min,spherolplastswerecollected by centrifugation at 800 g for 3 minat 4 ̊C and resuspendedin 1 mlice-cold Tris-EDTA (pH 7.5). Spheroplastswere lysed with 100 μl 0.5mm glass beads on a vortex mixer with 10 secpulsegiven thricewith intermittent ice-breaks.Cellsuspension was centrifuged at 800 g for 5 minat 4 ̊C to pellet unbrokenspheroplastsdown andthesupernatant was centrifuged at 15,000 g for 5 minat 4 ̊C to obtainthemembrane fraction pellet.Pellet was washed once with ice-cold Tris-EDTA (pH 7.5), resuspendedin 50 μl of the samebuffer and stored at -20 ̊Ctill further use. Protein concentration of pellet fraction was estimated using BCAprotein assay kit with BSA as thestandard

Trehalose from C. glabratacells was extracted by trichloro acetic acid (TCA)solutionas described previously (Lillie et al.,1980). Cells grown in YPDmediumwere collected at different time pointsof growth and washed thrice with ice-cold sterile water. Cells were immediatelystored at-20 ̊Ctill further use.For trehalose isolation, 10-20 OD600cells were thawed in 500 μl TCA (0.5 M) solutionon ice and incubated at room temperaturefor 1 h.Supernatant fraction was collected by sedimenting cells at 14,000 rpm for 5 minat 4 ̊C.TCA extractionwas repeated withcells once more and the resultingsupernatant was mixed with the earlier fraction.Extractedtrehalose was measuredby phenol-sulphuric acid methodof carbohydratedeterminationwithcommercially available purified trehalose(Becton, Dickinson and Co.) as a standard.Total trehalosecontent was normalized to the cell densityand expressed as μg/2 x 107cells

To assess the activity of plasma membrane proton pump, CgPma1, in cells grown in differentexternal pH environment,whole cell acidification assaywas carried out.This assay is a measurement of glucose-responsive proton pump activityin live cellsand is based on a decrease inthe pH of a weakly-buffered solutionupon extrusion of H+ions from thecell. The amount of change in the pH of the medium represents a crude measurement of the activity of functional plasma membrane proton pump in live cells. Whole cell acidification assay was conductedwithcellsgrown in YNB pH 5.5 and YNB pH 2.0medium as described previously (Martinez-Munoz and Kane, 2008) with slight modifications.After growth at30 ̊C for 2 h, cells were harvested, washed and resuspended(1.5-3.0 mg wet weight/ml) in 15ml MES/TEA (1mM; pH 5.0) buffer. Cell suspension was kept at 25 ̊C with continuousagitation. Extracellular pH of the buffer solution was recorded at 1 mininterval for 20 minwith the help of a pH meter(BT-600, BoecoGermany). To activate plasma membrane proton pumping, glucose and KCl were added to a final concentration of 40mM after 3 and 8 minincubation, respectively. Plasma membrane proton pump activitywas plotted as a change in the pH of the extracellular solutionversustime

Log-phase yeast cell cultures were harvested and total protein was extracted by lysingyeast cells using glass beads. Briefly,10 mllog-phase yeast culturesgrownin appropriate medium were harvested,washed once with ice-cold water and suspended in 250 μl homogenizing buffer containing 1 mM phenylmethylsulfonylfluoride(inhibitsserine proteases), 10 mM sodium fluoride(inhibit Ser/Thr and acid phosphatases), 1 mM sodium orthovanadate (inhibits Tyr and alkaline phosphatases) and 1X concentration of protease inhibitor cocktail(RocheCat # 04693159001). Cells were lysedwith glass beads by vortexing five times at high speed for 1 min with intermittent 1 min ice breaks. Unbroken cells and cell debris were removed by centrifugation at 1,000 g for 5 min at 4 ̊C. Cell lysate was collected and protein was quantified using bicinchoninic acid (BCA)protein assay kit (Thermo Scientific # 23227) as per supplier’s instructions

Themethod was used for isolation of good quality genomic DNA that wasused to map Tn7insertionin C. glabratamutants.Briefly,10 mlsaturated yeast culturewasharvested, resuspendedin 1 ml sterile water and transferred toa2 ml microcentrifuge tube. Cells were pelleteddown by centrifugation at 4,000 rpm for 5 min. Supernatant was discarded and the pellet was resuspendedin 500 μl freshly prepared solutioncontaining100mM EDTAand 5% β-mercaptoethanol andincubated at 42 ̊C for 10 min. After incubation,cells were spun down at 5,000 rpm for 1 minand resuspendedin 500μl freshly-prepared BufferB. One tip full of lyticase(Sigma # L4025) was added and cellsuspension was incubated at 37 ̊C for 1 h. Following incubation,cell suspension was spun down at 6,000 rpm to recover spheroplasts.Spheroplasts weregently resuspendedin 500μl BufferCand DNA was twice extracted with 500μl phenol:chloroform:isoamyl alcohol (25:24:1)solution.Aqueous layer was collected in a new 2ml microcentrifuge tube and DNA was precipitated with 1ml ethanol and 1/10thvolume of 3M sodium acetate (pH 5.2)by centrifugation at 13,000 rpm for 5 min. Pellet was resuspendedin 200 μl TE containing 0.3 μl of RNase Cocktail™and incubated at 37 ̊C for 30 min.After incubation, 300 μl additional TE was added and DNAwas re-precipitated withethanol and 3 M sodium acetateas described above. Pellet was washed with 70% ethanol anddried under air. DNA pellet was finally suspended in 100 μl TE and stored at -20 ̊C

phenol:chloroform:isoamyl alcohol (25:24:1)was added to the tube and mixed thoroughly.Aqueous phase was collected after centrifugationat 12,000 rpm for 3 minand was transferred toanew 2 ml microcentrifuge tube.1 ml absoluteethanol was added to the aqueous phase and DNA was precipitated by centrifugation at 12,000 rpm for 8 minat 4 ̊C.DNA pellet was washed with chilled 70%ethanol and dried under air. DNA pellet was resuspendedin 50 μl TE containing 0.3 μl of RNase Cocktail™(Ambion®# AM2286)and incubated at 50 ̊C for 20 min. 200 μl additional TE was added to the above suspension and DNA was stored at -20 ̊C

In this method of genomic DNA extraction,yeast cells werelysed by mechanical disruption with glass beads. Briefly, yeast cells were harvested after overnight growth in YPD medium, resuspendedin 500 μl waterand transferred toa2 ml microcentrifuge tube.Cells were pelleteddown at 10,000rpm for 1 min. Resulting supernatant was discarded and the pellet was resuspendedin 500 μl Buffer A. The tube was incubated at 65 ̊C for 15 min. After incubation, 500 μl ofphenol:chloroform:isoamyl alcohol (25:24:1) and 0.5 gm of acid-washed glass beads (Sigma # G8772) were addedto the tube. Cells were lysed by three cycles of high speed vortexing withintermittent ice breaksfor 45 secand pelleteddown at 12,000 rpm for 3 minat 4 ̊C.Uppermost aqueous phase was transferred to a 2 ml microcentrifuge tube,500 μl of

This quick extraction method was used to isolate genomic DNA which was used as templateto amplify gene of interestor toverify the knock-out. C. glabratacells were grownovernight to saturation in 10 mlYPD medium at 30 ̊C.Cells were harvested at 4,000 rpm for 5 min, resuspendedin 400 μl Buffer Acontaining 50 mM Tris-HCl, 10 mM EDTA, 150 mM NaCl, 1%Triton X-100 and 1%SDSand weretransferred to a2 ml microcentrifuge tube. Equal volume ofphenol-chloroform solution was added to the abovesuspensionfollowed byvortexingfor 2-3 minand incubationat 42 ̊C for 30 minwithcontinuous agitation at 800 rpm on thermomixer (Eppendorf). Cell debris was removed bycentrifugation at 12,000 rpm for 5 minand aqueous fraction(~ 350 μl)was transferred to a new 2 ml microcentrifuge tube.0.3 μl RNaseCocktail™(Ambion® # AM2286) containing RNase A (500 U⁄ml) and RNase T1 (20,000 U⁄ml) was added and tubes were incubated at 37 ̊C for 30 min. DNA was precipitated with 2.5 volumesof chilled ethanol and 1/10thvolume of 3 M sodium acetate (pH 5.2).DNA pellet was washed with chilled 70%ethanol and semi-dried under air.Pellet was suspendedin 100μlTE (10 mM Tris-HCland 1 mM EDTA; pH 8.0)and stored at -20 ̊C.DNA concentration was determined by recordingabsorbance at 280 nmin Nanodrop (Nanodrop ND-1000, Thermo Scientific).

Based on the subsequent use, DNA from C. glabratacells was extracted using three different methodologie

C. glabratayeast cells were grown overnight in 5 ml YPD medium at 30 ̊C. An aliquot from the overnight culture was inoculated in 10 ml fresh YPD medium to an initial OD of 0.1. Cells were incubated at 30 ̊C till the cultureOD600was between 0.4 and 0.6. Cells were harvested in a sterile 50 ml centrifuge tube and washed twice with sterile Milli-Q(MQ)water. Washed cells were suspended in 100 μl of 100 mM LiOAc, mixed thoroughly and transferred to a sterile 1.5 ml microcentrifuge tube. A transformation mix containing 240 μlpolyethylene glycol(PEG) (50% (w/v)), 36 μl LiOAc(1 M), 25μl ultrapure single-stranded salmon sperm DNA (2 mg/ml) (Clonetech) was added to 50 μl cell suspension. 50 μltransforming DNA (1μg circular plasmid DNA) was added to the above suspension. Whole mixture was vortexed gently and incubated at 30 ̊C for 45 min. 43 μl DMSO was added to the tubeand incubated at 42 ̊C for 15 min. Cells were collected after centrifugation at 5,000 rpm for 1 min and suspended in minimal medium containing 0.6% Bacto-Casamino acid. Transformation mixture was plated on CAA plates and transformants were selected for uracil prototrophy

5-10 ml saturated bacterial culture harboring the desired plasmid was harvested at 5,000 g for 3 min. Plasmid DNAwas isolated using QIAprep Spin Miniprep Kit (Qiagen, USA) or GenElute™ HP Plasmid Miniprep kit (Sigma-Aldrich, USA) as per manufacturer’s instructions

E. coli DH5α ultra-competent cells were transformed with plasmid DNA by heat shock at 42 ̊C for 90 sec as described previously in Molecular Cloning-A Laboratory Manual (Sambrook and Russell,2001). Bacterial transformants were selected on LB agarmediumcontaining appropriate antibiotics. Transformants obtainedwere colony purified on LB plates containing antibiotics.Presence of the desired insertwas first verified by colony PCR followed by PCRusing extracted plasmid DNA as template

suspension was kept on ice for 10 min and 50 μl volume was aliquoted to chilled sterile microcentrifuge tubes. Cellswere immediately snap-frozen in liquid nitrogen and stored at -80 ̊C

A single colony of E.coli DH5-α strain was inoculated in 10ml LB medium and incubated at37 ̊C for overnight. 4 ml of thisovernight culture was inoculated in 2 lt SOB medium and incubated at 18 ̊C till theOD600reaches to 0.5. Cells were harvested by centrifugation at 2,500 g for 10 min at 4 ̊C and washed gently in 80 ml ice-cold Inoue transformation buffer. Cells were collectedby centrifugation at 2,500 g for 10 min at 4 ̊C and gently resuspended in 20 mlice-cold Inoue transformation buffer. To this cell suspension, 1.5 ml sterile DMSO was added and swirled gently. Cell

All experiments in this studywere performed with log-phase cellsunless otherwise mentioned. For obtaining log-phase cells, overnight YNB-or YPD medium-grown yeast cellswerere-inoculated in fresh YNB or YPD medium to an initial OD600of 0.1-0.2.Cells were incubated at 30 ̊C with shaking at 200 rpmtill the OD600reached to 0.4-0.6 OD. After incubation, log-phase cellswere collected bycentrifugation at 4,000 rpm for 3 min,washed once with the same medium and usedforfurtheranalysis

C. glabratastrains were grown overnighteither in YPDor YNBliquid mediumat 30 ̊C with shaking at 200 rpm. Cells were harvested and suspended in 1X PBS to a final OD600of 1.0.Five 10-fold serial dilutions of cell suspension wereprepared in PBS and3-4μlwasspotted on YPD/YNBplates containing various test compoundsusing a multi-channel pipette.Plates were incubated at 30 ̊C and growth profileswererecorded after2-4days

Yeast cell viability was measured by plating appropriate dilutions of cell cultureonYPD plates at various time intervalsduringgrowth.Cell suspension was diluted in1X PBS. YPD plates were incubated at 30 ̊C for 2-3 daysand total colony forming units(CFUs)were calculated by counting the number of coloniesthat appeared onYPDplatesand dividing that number by anappropriate dilution factor

preparedin appropriate solvents, sterilizedby autoclaving or filtrationand stored at appropriate temperature

For growth analysisof C. glabratastrains, a single colony from YPD or YNBagar mediumwas inoculated in appropriate liquid medium and incubated at 30 ̊C with shaking at 200 rpmfor 14-16 h. This overnight grown culture was used toinoculatetest medium to an initial OD600of 0.1to 0.3.Optical density/Absorbance of the cell suspensionwas measured using Ultraspec 2100 pro UV/visible spectrophotometer (Amersham Biosciences) at600nmat regular time-intervals up to a period of 96 h.Absorbance values were plotted with respect to time. Generation time of yeast strains wascalculated fromthe logarithmic (log) phase of cellgrowth. Growth profilesbetween 4 (t1)and 8 h(t2)time interval wereconsideredfor calculationof generation time usingfollowing formula. Generationtime(G)= (t2-t1) x {log (2)/ [log (Bf/Bi)]}G= Generation time in ht1=Initial timepoint taken for analysist2 = Final timepoint taken for analysisBf= Number of cells at time t2(calculated on the basis of OD600values, wherein1 OD600of C. glabratacorresponds to 2 X 107cells.)Bi= Number of cells at time t1(calculatedas mentioned above)Severalyeast strains used in this study were analysed for their susceptibility to variouschemical compounds,drugsand metal ions. For this purpose, stock solutions were

mM final concentration) and pH was adjustedto the desired valueby addition of HCl or NaOH. Medium was sterilized by autoclaving.YNBagar plates ofdifferent pHwereprepared by mixing equal volume of separately autoclaved 4% bacto-agar solution and2X varied pH-adjusted-YNB liquidmedium.All routine sterilization of mediumand solutionswas either carried outby autoclaving at 121 ̊C for 15-20 minat highpressure condition(15 psi)or filtration with 0.2 μmpolyvinylidene fluoride(PVDF) membranefilter unit (Millex®-GV, Millipore).Both yeast and bacterial strains were stored as frozen 15% glycerol stock at -80 ̊Cfor extendedlifetime

C.glabratastrains were maintainedeither on rich YPDor synthetically-defined YNB medium. C.glabratacells were routinely culturedat 30 ̊Cwith shaking at 200 revolutions per min(rpm)unless otherwise mentioned. Forgrowthexperiments, C. glabratastrains were freshly revived on YPDmediumfrom glycerol stocks.Escherichia coliDH5α bacterial strainwasused for plasmid transformation and propagationpurposes and maintained on LB medium.E.coliBW23473 bacterialstrainwas used to rescue Tn7transposon cassette from C. glabrataTn7insertion mutantsand maintained on LB medium. Bacterial strainsharboring plasmids were maintained on LBagar plates supplemented withappropriate antibiotics.For plasmid isolationpurpose,bacterial strains were grown overnight in liquid LB brothcontainingappropriate antibiotics at 37 ̊C with shaking at 200 rpm. Forpreparation of the solid medium, 2%bacto-agar was added to the mediumand autoclaved. To prepare medium of different pH, YNB mediumwas either buffered with citrateor HEPESbuffer (100

A single colonyof desired C. glabratastrainwas inoculated in YPD-liquid mediumand grown for 14-16 h. 50 μl overnight culture was inoculated inYPD-liquid mediumfor 4 h. Log-phase-grownyeast cells were harvested,washedwith PBSandwereinoculated atinitial OD600of 2 and 4,into YNB-dextrose and YNB-sodium acetate liquid medium,respectively.After 4 hincubation,yeast cells were harvested by centrifugation at 2,500g for 5 minand treated with 1.2 M zymolyasefor 1 hto obtain spheroplasts.Post zymolyase treatment, spheroplasts were resuspended in 100 μl resuspension bufferandanequal amount of 0.25 mm glass beadswasadded to lyse the spheroplasts. Using bead beater apparatus, spheroplasts were lysed and protein concentration in spheroplast lysateswas determined usingbicinchoninic acid assay (BCA) method and samples were stored at -20ºC till further use

Experiments involving mice were conducted at VIMTA Labs Limited, Hyderabad in strict accordance withguidelines of The Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA), Government of India. The protocol was approved by the Institutional Animal Ethics Committee (IAEC) of the Vimta Labs Ltd. (IAEC protocol approval number: PCD/OS/05). Procedures used in this protocol were designed to minimizeanimalsuffering

E. colistrains carrying plasmids were inoculated and grown overnight at 37ºC and 200 rpm in LB-liquid medium supplemented with either 50 μg/ml ampicillinor 30 μg/ml kanamycin. Cells were harvested by centrifugation at 2,500g for 5 min. Plasmids were extracted using Qiagen plasmid miniprep kit following the manufacturer’s instructions. Concentration of the extracted plasmid DNAs was measured using spectrophotometerat 280 nmandstored at -20ºC

C. glabratastrains were routinely grown either in rich YPD medium or synthetically-defined YNB medium at 30°C withcontinuous shaking at 200 rpm unless otherwise stated. In general, C. glabratafrozen glycerol stocks wererevivedonYPD medium by streaking and allowed to grow for 1-2 days. C. glabratastrainsharboringthe plasmid with URA3as selectable marker were revived onCAA medium.To prepare liquid cell culture, single colony of eachC. glabratastrainwasinoculated either in YPD or YNB broth mediumand grown for 14-16 h. C. glabratastrains streaked on plates were storedat 4°C fora maximum period of2 weeks

To collectmacrophage-internalized yeast cellsfor RNA and protein extraction, 107THP-1 monocytes were seeded in 100 mm cell culture dishes and treated with PMA. PMA-differentiated THP-1 macrophages were infected with appropriateC. glabratastrainsto a MOIof 1:1. Equal numberof C. glabratacells wasinoculated inRPMI medium as control. Two hourspost infection,non-phagocytosed yeast cells were removed by washing THP-1 macrophages thrice with PBS. At different time points, culture dishes were washed twice with chilled PBS and 2 mlchilled sterile water was added toeach dish to lyse the macrophages. Corresponding cultures grown in RPMI medium were transferred to50 ml polypropylene tubesand transferred on ice. Lysates were collected by scrapping the macrophage monolayer and transferred to50 ml polypropylene tubes.RPMI-grown and macrophage-internalized C. glabratacells were harvested by centrifugation at 2,500g for 8 min. Macrophage cell debris were removed frommacrophage-internalized cells by repeated washing with chilled sterile water. Harvested C. glabratacells were stored at -20ºC till further use

undertissueculture conditionsfor 45-60min andfixed in 3.7% formaldehydeas described earlier.For DAPI staining, Vectashield mounting medium containing DAPI was used and slides were visualized under confocal microscope.For heat killing, yeast cells were harvested from 1 ml culture, washed, resuspended inPBS andwere incubated at 95°C for 5 min

PMA-treated THP-1 macrophages were infected with C. glabratacells to a MOIof 1:1 in four-chambered slides and incubated at 37°C and 5%CO2. After 1 hcoincubation, each chamber was washed thrice with PBS to eliminate extracellular yeast cellsand medium was replaced with fresh prewarmed RPMI medium containing100 nM Lysotracker Red DND-99.Infected THP-1 macrophageswere incubated

For confocal microscopyanalysis, 5X105THP-1 cells were seeded and treatedwithPMA in 4-chambered slides. Differentiated THP-1 macrophageswere infected either with FITC-labeled or GFP-expressingC.glabratastrains to a MOIof 1:1. At different time intervals, medium was aspirated out from each chamber of 4-chambered slides and chamberes were washed twice with PBS. To fixthe infected macrophages,500 μlformaldehyde(3.7%) was added gently toeach chamber andincubated for 15 minat room temperature. Each chamber of the slide was washed twice withPBS to remove formaldehyde solution completely. To permeabilize the fixed cells, 500 μl Triton-X (0.7%) was dispensed toeach chamber and slide wasincubated at room temperature for 5 min. Chambers of the slide werewashed twice with PBS, separated from the slideusing a chamber removal device andwere air dried. Coverslips were placed onslides using Vectashield mounting mediumand bordersweresealed withnail paint. Slides werestored at 4°C until used forfluorescence imaging

THP-1 cells were seeded ina 24-well tissue culture plate to a celldensity of 1 million cells per well,treated with PMA and were infected with yeast cells to a MOIof 10:1. Two hours post infection, cells were washed thrice with PBS and medium was replacedwith fresh prewarmed RPMI medium.Plates wereincubatedat 37ºCfor 24 h. Supernatants were collected,centrifuged at 3,000 rpm for 5 minto get rid of particulate matter,if any, andwerestored at -20°C until use. Estimation of different cytokines wasperformed using BD OptEA ELISA kits as per the supplier’s instructions

Forinfection of THP-1 cells with single C. glabratastrain, PMA-treatedTHP-1 monocytes were seeded in 24 wellcell culture plate toa seeding density of 1 million cells per well. To prepare C. glabratacells for macrophage infection, single colony of the desiredstrain wasinoculated in YPD medium and allowed to grow for 14-16 hat 30°C. C. glabratacellsfrom 1ml overnight culture were harvested, washed with PBS andcell density was adjustedto 2X107cells/ml.50 μl of thisC. glabratacell suspension wasinfectedto macrophages to a MOIof 10:1. Two hours post infection, infected THP-1 macrophages were washed thrice with PBS to removenon-phagocytosed yeast cells and medium was replacedwith fresh prewarmed medium. Atdifferent time points post infection,infected THP-1 macrophages were washed with PBS three timesandlysed in 1 mlsterilewater. Lysates were collected by scrapping the wells with a micropipette tip, diluted in PBS and appropriatelysatedilutions were platedon YPD agar medium. Plates wereincubated at 30°C and colony forming units (CFU) were counted after 1-2 days. Final CFUs per ml were determined by

multiplying CFUs with dilution factor and fold-replication was determined by dividing the CFUs obtained at 24 h time-point by 2 h CFUs

THP-1 monocytes were treated with phorbol myrsitylacetate (PMA) to differentiate them to macrophages(Tsuchiya et al., 1982). For PMA treatment, THP-1 cells grown upto 70-80% confluencewere harvested from the culture dishes at 1,000 rpm for 3 min. Harvested THP-1 cells were resuspended in 5-10 ml fresh and prewarmed complete RPMI medium. 100μlof thiscell suspensionwasappropriatelydilutedinPBS and numberof viable cells was determined by trypan blue stainingusing hemocytometer. Cell suspension was diluted with prewarmed RPMI medium to a final density of 106cells/ml. PMA was added to this THP-1 cell suspension to a final concentration of 16 nM and mixedwell.PMA-treated THP-1 cellswere seeded either in 24-well cell culture plate or culture dishes and transferred to the incubator set at 37°C and 5%CO2.After 12 hincubation, medium was replaced with fresh prewarmed medium and cells wereallowed to recover for 12 h

weretransferred toa sterile 100 mm cell culture dishcontaining 11 mlfresh and prewarmed completemedium andculturedin tissue culture incubatorat37°C and 5% CO2.After 12hincubation, medium was replacedwith fresh prewarmed mediumand cells were allowed to proliferate till they acquire 80% confluence

Freezer stocks of THP-1 and Lec-2 cells were prepared either in commercial cell preservation medium (Gibco) or completemedium supplemented with 10%heat inactivated serum and 10% DMSO. For cryopreservation, 5-6 million cells were resuspended in 0.5 mlfreezing medium in 2 ml cryopreservation vials,stored in an isopropanol bath and were transferred to-70°C freezer. Aftertwo days, freezer stocks were transferred to liquid nitrogen containertill further use. To revive the cells, freezer stocks were taken outfrom liquid nitrogen container and transferred immediately to37°C water bath. After2-3 min, when freezing medium hadthawed completely,cells

To isolate primary peritoneal macrophages, 6-8 week old BALB/c mice were injected with 3% (w/v) thioglycollate broth (0.55% dextrose, 0.05% sodium thioglycollate, 0.5% sodium chloride, 0.05% agar)intraperitonealy (I.P. 50 μl/g body weight). After five days of injection, mice were euthanized by CO2inhalationand peritoneal macrophages were harvested byflushing the peritoneal cavity (lavage) with 10 mlDMEM medium(Zhang et al., 2008)

THP-1 andLec-2 cell lines were obtained from ATCC (American Type Culture Collection). THP-1 and Lec-2 cells were cultured and maintained in RPMI-1640 and α-MEM media,respectively, supplemented with 10% heat inactivated fetal bovine serum, 2 mM glutamine and antibiotics (100units/ml of penicillin and 100μg/ml of streptomycin). Both cell lines were maintained at 37°C and 5% CO2in Thermo-Scientific cell culture incubator. After every 2-3 days, spent medium was replaced with fresh,pre-warmed medium. For splitting the culture, cells were harvested at 1,000 rpm for 3 min. Spent medium was discarded and cells were resuspended in 4-6 ml fresh prewarmed medium. Finally, 3-4 million cells were resuspended in 12mlmedium in 100 mm culture dishes.Cellswere cultured and maintained in tissue culture incubatorat37°C and 5% CO2

Overnight grown bacterial culture (3ml)was pellet down by centrifugationat4ºC for10-min at 6000 rpm. The cells were re-suspended in 200μl of Resuspension solution(solutionI). 400μl of freshly prepared Lysissolution(solution II)was then added and mixed by gently inverting the tubesfor 4-6 times and allowed to lyse for 5 min at room temperature.The complete lysis was ascertained by uniformity and clarityof the contents. Subsequently, 400μl of Neutralization solution(solution III)was added and the tubes were inverted 4-6 timesand gently for homogeneous mixing followed byincubation for 5 min on ice. After centrifuging at 12,000 rpm for 15-min, supernatant was decanted into a fresh tube, and0.7 volume of iso-propanol was added.Theprecipitated nucleic acids were then recovered by centrifugation at 12,000 rpm for 30-min. The pellet was washed once with 70% ethanol, air-dried and re-suspended in 100μl of TE-buffer. It was treated with RNase at a concentration of 20μg/ml by incubating at 37ºC for 1hour. It was further extracted with an equal volume of phenol: chloroform: isoamyl alcohol (25:24:1) mixture. After centrifugation, the clear supernatant was used for recovering the nucleic acids. The nucleic acids were precipitated with 2.5 volumesof ethanolin presence of3 M sodium acetate. In case where high purity plasmid preparations are required (for transfection to cells) the plasmid isolation was carried out with the commercially available midiprep or miniprep kits following the manufacturer’s instruction. Plasmids were observed on 1% agarose gel

Total RNA was isolated by TRIzol method using the manufacturer’s protocol. Briefly, medium was removed from culture dish and recommended amount of TRIzol wasadded directly on to the dish and kept at room temperature for 5 minutes for lysis of cells. The cellular homogenate was then transferred to a 1.5ml microcentrifuge tube. For each mlof TRIzol, 200μl of chloroform was added and tubes were shaken vigorously for 10 seconds to completely dissociate the nucleoprotein complexes, followed by vortexing for about 30 seconds. The mixture was kept for 3-5 minutes at room temperature and then centrifuged at maximum speed of 12,000 rpm for 10 minutes. The upper aqueous phase was transferred into a fresh micro centrifuge tube and RNA was precipitated by adding 500μl of iso-propanol. The RNA pellet was obtainedby centrifugation at 12,000 rpm for 30 minutes at 4°C. The pellet was washed with 1ml of chilled 70% ethanol followed by centrifugation at 12,000 rpmfor 5minutes. The supernatant was removed and the pellet air-dried for about 5 minutes. The pellet was resuspendedin 30-50μl RNase free deionisedwater and dissolved at 55ºC followed by quantificationusingnanodrop spectrophotometerfor further use.The RNA integrity was checked by evaluating the 18S and 28S rRNA signals by running 1μl of total RNA on denaturing agarose gel stained with ethidium bromide

Total RNA isolation from cultured cells

nvolved use of GFP based vector system, the expression of the transgene was visualized under fluorescent microscope with excitation filter of 485+20 nm

Transient transfection of plasmid DNA in cellswas performed usingLipofectamine 2000transfection reagentaccording to manufacturer’s protocol. Briefly, 0.5 to 1million cellswere seeded in a 35mm tissue culture dish one day prior totransfection. For each 35mm dish, 4μg DNA was mixed in 250μl of Opti-MEMin one polypropylene tube. In another tube 10μl of Lipofectamine 2000 was diluted in250μl Opti-MEM and incubated at room temperature for 5 minutes. DNA and Lipofectamine 2000 were mixed together and allowed to form complexes for 30minutes at room temperature. Meanwhile, the adherent cells were washed twicewithPBS and 1ml of Opti-MEM was added. 500μl of complexes were then added to each dishcontaining cells and medium. After 6-8 hrs, the medium containing complexes wasremoved and complete medium was added and transgene expression was evaluated 24-48 hrs after transfection. Since most of the experiments

Themixture is incubated in a water bath at 37⁰C for 15 min and afterwards transferred on ice and 4μl of DNA loading buffer is added. The samples were then run on a polyacrylamide gel electrophoresis which had been pre-run for 30 min. Electrophoresis was carried out at 4⁰C for 3h till the bromophenol blue migrated to 2cm above the bottom of gel. The gel was taken out and kept on Whatman filter paper sheet and covered by saran wrap followed by drying in a gel dryer at 80⁰C for 1h under suction. The dried gel was exposed to phosphoimager screen by keeping in phosphoimager cassette overnight

A binding reaction mixture was prepared by adding the following components to a microcentrifuge tube on ic

The reaction was carried out by incubating at 37⁰C for 30 min. The reaction was stopped by adding 2μl of 0.5M EDTA, pH 8.0 and keeping on ice. A spin column was prepared using 1ml syringe and packed with sterile Sephadex G50 slurry and reaction mixture is applied on the top. The eluate is collected in different microcentrifuge tubes and radioactivity was counted using Geiger counter. The tube showing 7 to 9X106was used for experiment. The column containing the unincorporated [γ-32P] ATP was discarded in radioactive waste bin. The radiolabelled oligonucleotides were annealed with their corresponding complementary unlabelled oligonucleotides. A 50 fold molar excess of the latter was used for annealing for conversion of labelled single strand to double strand. Thetubes were kept in boiling waterbath for 3 min followed by room temperature for 30 min. The tubes were transferred to ice and the oligonucleotides were diluted to 4fmoles/μl using sterile H2O

The oligonucleotides were labelled at their 5'end with 32P using T4 polynucleotide kinase (T4 PNK) enzyme in a reaction given belo

Adherent cells growing either on cover slips or chamber slides were fixed with 4% paraformaldehyde for 10 min at room temperature. The cells were washed with PBS thrice for 5 min each and blocking was done in 2% BSA(preparedin PBScontaining 0.3% Triton-X 100) for 1h.The cells were incubatedwith primary antibody(dilutedin PBScontaining 0.3% Triton-X 100)for 2h at room temperature or overnight at 4⁰C.The cells were washed with PBS thrice for 5 min each followed by incubation withAlexa Fluor 488-or 594-conjugatedsecondary (anti-mouse/rabbit) antibodiesfor 1h. Then the cells were mounted on microscopicslides using Vectashieldmountingmediumcontaining nuclear dye DAPI. Imaging was done byeither the laser scanning confocal LSM510 or LSM 750 (Carl Zeiss, Oberkochen, Germany) or fluorescence inverted (Olympus 1X51, Tokyo, Japan) microscope

Equal amount of proteins were loadedon an appropriate percentageof denaturing SDS-PAGE gel. After completion ofthe run, the gel was over laid on a PVDF membranecut to the size of gel and sandwiched between filter paper sheets and kept inthe blotting cassette in the presence of transferbuffer. Finally the cassette was put in themini transblotapparatus and blotting was done for 2-3hours at a constantvoltage of 80Vat 4⁰C. For blocking the nonspecific sitesmembrane was incubated with blocking solution(5% non-fat milk solution in TBST)with gentle shaking for 1 hourat room temperature. Excess milk from the membrane was washedoff with TBST and themembrane was incubatedwith primary antibody diluted in 1XTBST for 3 hours atroom temperature or overnight at 4°C withshaking. After incubation the membrane was washedwith TBST and incubatedwithappropriate secondary antibody (conjugated with horse-radish peroxidase)diluted in5% fat free milk solution (in TBST) for 1hat room temperature.The blotwas later washed thricefor 10min eachwith TBST and processed for the detection of proteinsignal using ECL-prime chemiluminescencedetection reagent followed by detectionof signal either on X-ray filmor in a chemiluminescence detectionsystem(Proteinsimple, California, USA)

BCA (Bicinchoninic acid) method was used to determine the proteinconcentrationin various samples. The Cu2+ions from cupric sulphate (present inBCA reagent B) reagent arereduced to Cu+by the protein in an alkaline medium. The cuprous ion (Cu+) then combines with BCA (present in BCA reagent A) to give a purple colour whose intensity is proportional to the amount of protein present in the samples. This intensity is measuredby colorimetry at 562 nm. BCA reagent was prepared by mixing reagent A with reagent B in avolumeratio of 50:1. A standard curve was generated using increasing concentrations of BSA (2-10μg) in a 25μl reaction, in a 96 well plate. Cell lysates were also dilutedto same volume in parallel wells. 200μl of BCA reagent was then added to each well and incubated at 370C for 30 minutes. The absorbance readings were then takenin a spectrophotometer at 562 nm. Total protein was quantified by calculation of the slopes of regression lines ofabsorbanceand BSA standards

For preparation ofcellular homogenate from adherent cell culture, the medium was first removed and cells were washed with ice cold 1X PBS. The cells were then scraped in 1X PBS and pellet down by gentle centrifugation (4000 rpm for 2 minutes) at 40C. Cell lysis buffer was then added to the cell pellets and lysis was allowed for 30 minutes on a rotor at 4⁰C. Post lysis, cellswere centrifuged at 13000 rpm for 10min at 4°C. The pellet was discarded and supernatantwascollectedas cell homogenate

drop wiseaddition and kept at 4⁰C for 24h. Cells were then washed with PBS and stained with DNA staining solutionat 370C in darkwith intermittent shaking. The DNA content of cells was measured by flow cytometryusing FACS-Aria (Beckton-Dickenson) at 695 ±20 nm using a 655 long pass filter.The DNA content was then analysed by FACSDivaor FlowJosoftwareto evaluate the various phases of cell cycle. The diploid 2N DNA content was referred as G1/G0 population and the 4N DNA content was referred as G2/M population. Cells with intermediary DNA content (between 2N -4N) content were considered as S phasecells and those below 2N DNA content as sub G0 cells

Thecells were collected at various time points by trypsinization, washed in phosphate buffered saline (PBS, pH 7.2) and fixed in chilled 70% methanol: ethanol (1:1) solution by

Cells were seeded in replicates of five @ 3X103cells per wellinfive different 96well cell culture platesand grown in complete media. The method described earlier was slightly modified and followed (Gillies et al., 1986). After every 24h of seeding, one plate was stained with 0.2% crystal violet in 2% ethanolfor 15 minutestill 4thday i.e. 96h.One plate was stained just after the cells get attached to use as 0h time point. Excess dye was removed from the plates by washing with ample amount of water. Crystal violet dye incorporated in the cells was extracted using 0.1% SDS solution by shaking for 10 minutes on a shaker. Absorbance of the extracted dye was then determined at 570 nm in a spectrophotometer. The experiment was repeated at least three times and the average absorbance was plotted for each time point to generate a growth curve

Table2.2: Cell types used in the present study

In the present thesis, various cell types were used for which the details are provided in the Table 2.2. SiHa, HeLa, HaCaT, U2OS, SaOs , A549,HPLD andHEK-293cells were grown in Dulbecco’s modified Eagle’s medium (HyClone, Thermo Scientific, Logan, Utah, USA) supplemented with 2 mM glutamine (Gibco BRL), 100 U/ml penicillin and streptomycin (Gibco BRL, Carlsbad, CA, USA), and 10% fetal bovineserum (Gibco BRL, Carlsbad, CA, USA) under humified conditions at 37°C and 5% CO2.Cells were grown in cell culture dishes till they attained 70% confluency. For sub culturing, these were then trypsinised using 0.05% Trypsin EDTA solution and incubated for 5 minutes at 370C for cells to be detached from surface. The detached cells were then collected by gentle tapping the dish and pipetting. Trypsin was then inactivated by addition of FBS containing culture medium, transferred to a 15 ml tube and centrifuged at 1500 rpm for 2 minutes in a hanging bucket centrifuge. The cell pellet was then resuspended in complete medium and counted in Neubauercell counting chamber. Viability of the cells was checked by trypan blue exclusion method.Appropriate number of cells wasthen sub cultured in fresh cell culture dishes with culture medium as per the experimental requirements

Inpresent thesis, various cell lines have been used as mentionedearlier. Cells were either cultured in DMEM or RPMI medium containing 10% fetal bovine serum (FBS)along with antibiotics such as penicillin (100 U/ml), and streptomycin (100 μg/ml).In general, cells were grownin tissue culture T-75 flaskupto 85-90% confluency. Cells are washedwith PBS, followed by trypsinization with 0.05% Trypsin EDTA solution. Cells were detachedfrom the surfaceeither by gentle tapping or gentlepipettingor incubated for 5 minutes at 37°C. Culture medium containing serum was then added to inactivate trypsin. After careful mixing, cells were transferred to a 15 ml tube and centrifuged at 800 rpm for 5minutes. The cell pellet wasre-suspended in a fresh culture media containing FBS. The cell viability was checked by trypan blue staining, followed bycounting in Neubauer cell-counting chamber. Appropriate number of cells wasthen either sub-culturedin the ratio of 1:4 to 1:6or seeded in culture dishes as per the experimental requirements.Cells were maintained in humidified incubator at 37ºC in 5% CO2-95% air, throughout the experiment

S. cerevisiae strains were routinely grown either in rich YPD mediumorsyntheticcomplete medium (SC)(Section 2.1.5.1) at 30°C with continuous shaking at 200 rpm unless otherwise stated. In general, S. cerevisiae frozen glycerol stocks were revived on 2% YPD medium by streaking and allowed to grow for 1-2 days. S. cerevisiae strains harbouringaplasmid containingthe URA3geneas the auxotrophy selectionmarker were revived on synthetic complete medium lacking uracil (SC-Ura).To prepare liquid cell culture, a single colony of each S. cerevisiae strain was inoculated either in YPD or SC-Ura medium and grown for 14-16 h. S. cerevisiae strains streaked on plates were sealed with paraffin film (parafilm M) and stored at 4°C for a maximum period of 2 weeks.Protein over expression in yeast was carried in presence of galactose instead of glucose as the carbon source, as the plasmid pYesGex 6p2 carries the GALpromoter under which yeast proteins were expressed

Cells were plated in a manner that they were 30-50% confluent on the day of transfection.Cells were washed with serum-free medium,and the serum-free medium was added to the cells as per plate size. SiRNA was diluted in the serum-free medium, and oligofectamine was diluted in serum-free media, separately (Table 10). Both the complexes were incubated at room temperature for 5 min. Diluted siRNA wasmixed gently with diluted oligofectamine and incubated at room temperature for 15 min. The final transfection mixture was added dropwise to the cells and mixed properly by gentle rocking. Cells were incubated for 4 hrs.,and the growth medium containing 10% FBS was added to the plates without removing the previous medium. Cells were incubated overnight at 37°C in a CO2 incubator. After overnight incubation, the siRNA transfection was repeated using the same protocol. Cells were harvested after 24-48 hours of second round siRNA transfection. The knockdown was detected bychecking the protein levels throughwestern blotting. (Note: SiRNA transfection is carried out in antibiotic free medium)Table 10: SiRNA transfection methodology

Table 8: Lipofectamine plasmid-transfection methodology

For transfection with Lipofectamine, cells were plated in antibiotic-free medium 24 h before transfection and were transfected at a confluency of 70-80% as per the manufacturer’s protocol. The plasmid of interest was incubated in serum free media,and Lipofectaminewas incubated in serum free media forseparately5minutes. The plasmid and the Lipofectamine mixtures(Table 8)were mixedgentlyand incubated at room temperature for 20 min.;thetransfection mixture was added dropwise to the cells. Transfection media was replaced with the fresh complete medium after 6 hrs.of transfection and cell are harvested after 24 hours

Amplified PCR products were run on Agarose gel to check for the amplification ofgene of interests

PCR amplification of the gene of interests was carried out by following the method mentioned in table 4.Table 4: PCR methodology

development. Absorbance was measured at 490 nm, and concentration of glucose production was calculated against glucose standard. Cellulase activity is expressed as micromoles of reducing sugar (glucose) released per minute per 109cells. For plate assay, cell-free culture supernatant of X. oryzaepv. oryzaestrains were inoculated in wells of 0.2% CMC agarose plates. In addition, cellulase assay was also performed by spotting the colony on 0.2% CMC PSA plates. Plates were incubated for 8 to 24 h and stained with congo red to observe the halo formation as described previously (Wood and Bhat, 1988). Extracellular xylanase activity in different X. oryzaepv. oryzae strains was measured using 0.2% 4-O-methyl-D-glucurono-D-xylanremazol Brilliant Blue R (RBB-Xylan) (Sigma-Aldrich) as substrate (Biely et al., 1988)on 1% agarose plates. Xylanase activity is indicated by production of halo around the bacterial colony (Ray et al., 2000). Similarly, for lipase activity p-nitrophenyl butyrate was used as substrate. Lipase activity was calculated by measuring the level of p-nitrophenol released upon hydrolysis of p-nitrophenyl butyrate at 410 nm (Acharya and Rao, 2002). Lipase activity was expressed as micromoles of p-nitrophenol released permin per109cells. For plate assay, colonies were spotted on 1% PSA plates containing 0.5% Tributyrin in 100 mM Tris (pH 8) and 25 mM CaCl2 and halo formation was observed for lipase activity

For extracellular enzyme assays, X. oryzaepv. oryzae strains were grown in PS, MM9 and XOM2 media to an OD of 0.6, and centrifuged at 12,000 g for 10 min to collect the supernatant. The supernatant was taken as an extracellular fraction and cell pellet was plated by dilutionplating to get the CFUs per milliliter of culture. Extracellular cellulase activity was measured using phenol-sulphuric acid (H2SO4) method, which measures pentoses and hexoses (concentration of glucose released) upon cellulase activity (DuBois et al., 1956). Briefly, a specific amount of supernatant was taken and volume was adjusted to 300 μl by adding 50 mM acetate buffer (pH-5.4). To this, 1% carboxy methyl cellulose (CMC) substrate solution was added and mixed well. This mixture was incubated at 28°C for 30 min, and the reaction was stopped by adding 1 ml ice-cold ethanol. Solution was mixed well, kept on ice for 5 min and centrifuged at 12,000 g for 5 min. Supernatant was recovered and 5% phenol was added to it, mixed well followed by adding 1 ml H2SO4. The tube was incubated at RT for 20 min for co

200 rpm in LBbroth supplemented with appropriate antibiotics (plasmid antibiotic marker). Cells were harvested by centrifugation at 12,000 g for 5 min. Plasmids were extracted using Qiagen plasmid miniprep ormidiprep kit following the manufacturer’s instructions. Concentration of the extracted plasmid DNAs was measured using spectrophotometer at 280 nm and stored at -20°C

E.colistrains carrying plasmids were inoculated and grown overnight at 37°C and

A microtipful cells of bacterial strain from appropriate medium was resuspended in 20 μl sterile water and incubated at 98°C for 10 min for cell lysis. 2 μl of heat-lysed cell suspension was used as template in 25 μl PCR reaction

and finally resuspended in 100 μl sterile water. Bacterial cell suspension was aliquoted in 20 μl volume. The above procedure was followed for all the three strains and cell suspension of three different strains were mixed together in 1:1:1 ratio. For conjugation to occur, 20 μl of the above mixture was spottedon the LB agar plate and incubated at 37°C for 12-16 h. Next, the conjugation drops were streaked on LB agar plate containing appropriate antibiotics to select the S17-1 recipient containing recombinant plasmid.S17-1 was directly conjugated with Xanthomonasstrain. S17-1 strain containing recombinant plasmid (3 ml) and recipient Xanthomonasstrain (100 ml) was grown overnight with appropriate antibiotics. Cells were harvested and washed thrice as mentioned earlier. Xanthomonasstrain was finally dissolvedin 600-700 μl sterile water and S17-1 strain was dissolved in 3 ml sterile water. 50 μl Xanthomonascell suspension and 10 μl S17-1 cell suspension were mixed together and 20 μl was spotted on PS agar plate. After 40 h of incubation at 28°C, each conjugation drop was dissolved in 400 μl water separately and plated on PS agar medium with rifampicin (counter-selectable marker) and plasmid specific antibiotics for specific selection of Xanthomonascolony with recombinant plasmid

Since compatible conjugation does not exist between Xanthomonasand E.coliDH5α strain.Therefore, upon getting the appropriate clones in DH5α, conjugation was performed with S17-1 (recipient strain) and PRK600 (helper strain). All the three strains (DH5α with clone, S17-1 and PRK600 strain of E.coli) were grown overnight at 37°C with constant shaking at 200 rpm in 3 ml LB broth. Cells from 1 ml overnight grown cultures were harvested by centrifugation followed by three washes with s

shaking at 200 rpm. 1% of overnight grown culture was inoculated in 100 ml fresh PS medium and grown to obtain log-phase culture. Log phase Xanthomonas culture was kept on ice for 10-15 min, aliquoted in 50 ml pre-chilled centrifuge tubes and centrifuged at 4000-5000 g at 4°C for 10 min. Supernatant was discarded and pellet from each tube was gently resuspended in 10-20 ml sterile chilled water. Next, cells were harvested by centrifugation at 4000 g at 4°C for 10 min and supernatant was discarded. Harvested cells were washed twice and finally resuspended in adequate amount of prechilled sterile water. 100 μl of cell suspension was aliquoted in sterile 1.5 ml microcentrifuge tubes and kept on ice. For transformation, Xanthomonaselectrocompetent cells and appropriate amount of plasmid DNA was mixed, and kept on ice in laminar hood. This mixture was added to 1 mm electroporation cuvettes (Biorad) and tapped gently to allow the cells to settle properly in order to avoid air bubbles. Competent cells were electroporated (1800 V, 25 μF, 200 Ω, 1mm cuvette) followed by immediate addition of fresh PS broth in the cuvette, mixed properly and taken in the microcentrifuge tubes. Microcentrifuge tubes containing transformed cells were incubated at 28°C for 2 hours with continuous shaking for recovery. After recovery, cells were plated on specific medium with appropriate antibiotics and incubated in 28°C plate incubator

For electrocompetent cell preparation, single colony of desired Xanthomonasstrain was inoculated in 5 ml PS medium and grown overnight at 28°C

E.coliDH5α strain was transformed with plasmids carrying appropriate inserts to generate clones, and Xanthomonas deletion strains. Ultracompetent cells stored at -80°C were thawed on ice for 5-10 min. 5 μl ligated plasmid was added to 100 μl ultracompetent cells and incubated on ice for 30 min. Next, competent cells were subjected to heat shock at 42°C for 90 seconds. Cells were immediately transferred on ice for 2-3 min. Next, 1 ml LB medium was added and cells were allowed to recover for 1 h on a shaker incubator set at 37°C. After the recovery, cells were centrifuged at 3000 g for 3 min. Medium supernatant was discarded and cells were resuspended in 100 μl fresh sterile medium. Cells were plated on LB agar containing appropriate antibiotics. Plates were incubated at 37°C for 12-16 h

A single colony of E.coliDH5α strain was inoculated in 5 ml LB medium and incubated at 37°C for overnight. 1% of overnight grown culture was inoculated in 500 mlfresh LB medium and incubated at 37°C for 2-3 h till the OD600 reached to 0.4-0.5. Culture was chilled on ice for 5 min followed by centrifugation at 3000 g for 15 min at 4°C. Harvested cells were washed gently with 200 ml ice-cold TFb-I buffer. Cells were collected by centrifugation at 3000 g for 5 min at 4°C and gently resuspended in 20 ml ice-cold TFb-II buffer. Bacterial cell suspension was kept on ice for 15 min and was aliquoted in 100 μl volumes in chilled sterile microcentrifuge tubes. Cells were immediately snap-frozen in liquid nitrogen and stored at -80°C

Xanthomonas strains were grown in PS medium for 14-16 h at 28°C with continuous shaking at 200 rpm. 1 ml of bacterial cultures were ten-fold serially diluted in water and 100 μl volume of each dilution was plated on PS agar plates to get the colony forming units (CFUs). Similarly, 5 μl volume of each dilution was spotted on PS agar plates containing different concentration of streptonigrin and different detergents for intracellular iron and membrane sensitivity assay, respectively. Plates were incubated at 28°C and images were captured after 2-8 days of incubation depending upon m

For growth analysis of Xanthomonasstrains, a loopful of bacterial colony was inoculated in appropriate broth medium and grown for 14-16 h. 0.2% of overnight grown culture was used to inoculate the test medium (for iron limitation, PS with 50 or 100 μM of 2,2’-dipyridyl, and for iron supplementation, different concentrations of either FeCl3or FeSO4was added). Cultures were transferred to a shaker incubator set at 28°C and 200 rpm. Absorbance of cultures was measured using Ultraspec 2100 pro UV/visible spectrophotometer (Amersham Biosciences)at 600 nm at regular time-intervals till 48 h. Absorbance values were plotted with respect to time and generation time was determined from the logarithmic (log) phase of bacterial growth using the following formula.G = Generation time (h)T1= Initial time point taken for analysisT2= Final time point taken for analysisNf = Absorbance at time T2(Final OD)Ni= Absorbance at time T1(Initial OD)

Xanthomonasstrains were routinely grown in rich PS medium, at 28°C with continuous shaking at 200 rpm unless otherwise stated (New Brunswick Scientific, Innova 43, U.S.A.). In general, Xanthomonas frozen glycerol stocks were revived on PSA medium by streaking,and allowed to grow for 3-4 days. To prepare liquid culture, a loopful of each Xanthomonasstrain was inoculated in PS medium and grown for 24-30 h. Xanthomonasstrains on plates were stored at 4°C for a maximum period of 1 week. For growth of X. oryzaepv. oryzaein Minimal (MM9); (Kelemu and Leach, 1990)and XOM2 media (minimal media which induces hrp genes in X. oryzaepv. oryzae),(Tsuge et al., 2002), first the strains were grown in PS medium to a cell density of 109cells/ml and then centrifuged at 5000 g to concentrate the cells and washed twice with sterile water to remove media components sticking to the cells. Washed cells were inoculated in MM9 and XOM2 medium and grown for overnight.Escherichia coliDH5α,used for cloning purposes, was revived on LB medium containing nalidixic acid and grown at 37°C with continuous shaking at 200 rpm. LB medium was supplemented with appropriate antibiotics to grow the bacterial strains carrying plasmids. For plasmid purification, bacterial strains were grown overnight in LB broth medium containing suitable antibiotics.Antibiotics were used at a final concentration of 50 μg/ml rifampicin, kanamycin, streptomycin and trimethoprim; 100 μg/ml ampicillin; 25 μg/ml nalidixic acid; 10 μg/ml cephalexin, chloramphenicol and gentamicin; 20 μg/ml cyclohexamide and 5 μg/ml tetracyclin

Experiments involving mice were performed at the CDFD animal facility, VIMTA Labs Ltd., Hyderabad, India(www.vimta.com) in strict accordance with the guidelines of the Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA), Government of India. The protocol was approved by Institutional Animal Ethics Committee (IAEC) of the Vimta Labs Ltd. (IAEC protocol approval number: PCD/CDFD/05). Procedures used in this protocol were designed to minimize animal suffering

This method was used to isolate highly pure genomic DNA. Briefly, 10 ml overnight grownC. glabratacultures were spun downandwashed with 10 ml sterile water. Washed cells wereresuspended in500 μl sterile water and transferred toa1.5 ml microcentrifuge tube. Tubes were spundownat 4,000 rpm for 5 min, supernatant was discarded andcell pellet was resuspended in 500 μl of buffer containing 100 mM EDTA and 5% β-mercaptoethanol and incubatedat 42°C for 10 min. Post incubation, cells were spun down at 4,000 rpm for 5 min and resuspended in freshly prepared Buffer B. To this, one tip-full of lyticase (Sigma, L4025) was added and incubated at 37°C for 1 h.After incubation, spheroplasts were collected by spinning downtubes at 6,000 rpm for 5 min, supernatant was discarded and the pellet was resuspended in 500 μl of Buffer C. DNA was extracted twice with 500 μl of PCI (25:24:1) solution and the aqueous layer was transferred toa new1.5 ml microcentrifuge tube. To this, 2.5 volume of absolute ethanol and 1/10thvolume of 3 M sodium acetate (pH 5.3) wereadded. Tubes were spundownat 13,000 rpm for 10 min, DNA pellet was resuspended in 200 μl of 1X TE buffer containing0.3 μl of RNase cocktail (Ambion) and incubated at 37°C for30 min. DNA was precipitated again by adding absolute ethanol and sodium acetate as mentioned above. DNA pellet was washed once with 70% ethanol, centrifuged at 13,000 rpm for 10 min, air-dried at room temperature and was resuspended in 100-200 μl of 1X TE buffer by gently tapping the tube. DNAwas stored at -20°C until use

This method was used to isolate highly pure genomic DNA. Briefly, 10 ml overnight grownC. glabratacultures were spun downandwashed with 10 ml sterile water. Washed cells wereresuspended in500 μl sterile water and transferred toa1.5 ml microcentrifuge tube. Tubes were spundownat 4,000 rpm for 5 min, supernatant was discarded andcell pellet was resuspended in 500 μl of buffer containing 100 mM EDTA and 5% β-mercaptoethanol and incubatedat 42°C for 10 min. Post incubation, cells were spun down at 4,000 rpm for 5 min and resuspended in freshly prepared Buffer B. To this, one tip-full of lyticase (Sigma, L4025) was added and incubated at 37°C for 1 h.After incubation, spheroplasts were collected by spinning downtubes at 6,000 rpm for 5 min, supernatant was discarded and the pellet was resuspended in 500 μl of Buffer C. DNA was extracted twice with 500 μl of PCI (25:24:1) solution and the aqueous layer was transferred toa new1.5 ml microcentrifuge tube. To this, 2.5 volume of absolute ethanol and 1/10thvolume of 3 M sodium acetate (pH 5.3) wereadded. Tubes were spundownat 13,000 rpm for 10 min, DNA pellet was resuspended in 200 μl of 1X TE buffer containing0.3 μl of RNase cocktail (Ambion) and incubated at 37°C for30 min. DNA was precipitated again by adding absolute ethanol and sodium acetate as mentioned above. DNA pellet was washed once with 70% ethanol, centrifuged at 13,000 rpm for 10 min, air-dried at room temperature and was resuspended in 100-200 μl of 1X TE buffer by gently tapping the tube. DNAwas stored at -20°C until use

Yeast genomic DNA was isolated by mechanically lysing the yeast cells. Briefly, 10 ml of overnight grown yeast culture was transferred toa 15 ml centrifuge tube andcells were spun down at 4,000 rpm for 5 min. Media was decanted and cells were washed with 10 ml sterile water. Washedcells were resuspended in 500 μl of Buffer A and transferred to a 1.5 ml microcentrifuge tube. Tubes were incubated at 65°C for 15 min. Post incubation,500 μl of PCI (25:24:1) solution was added. To this, 0.5 g of 0.5 mm glass beads were added and cells were lysed mechanically in a bead-beatinghomogenizer (MP Biomedicals,FastPrep®-24) thrice, 45 seceach, with intermittent cooling on ice. Tubes were spun at 12,000 rpm for 5 min and the aqueous layer was transferred to a new 1.5 ml microcentrifuge tube. To this, 500 μl of PCI solution was addedand mixed gently by inverting the tubes.Tubes were centrifuged again at 12,000 rpm for 5 min and aqueous layer was transferred to another 1.5 ml microcentrifuge tube. Next, 2.5 volume of absolute ethanol was added to the aqueous layer, mixed well and centrifuged at 13,000 rpm for 10 min. Supernatant was decanted and the DNA pellet was washed once with 70% ethanol and centrifuged at 13,000 rpm for 10min. Washed DNA pellet was air-dried and dissolved in 100-200 μl of 1X TE buffer by gently tapping the tubes

C. glabratastrains were routinely grown in rich YPD medium or synthetically defined YNB medium, or YNB medium supplemented with CAA, unlessstatedotherwise.To obtain overnight grown liquid cultures, C. glabratacells were inoculated in appropriate medium and incubated at 30°C under constant agitation (200 rpm) to maintain proper aeration.To revive the frozenstocks,about one tipfull of frozen culture was streaked either on YPD-agar or on CAA-agar medium. In general, frozen stocks of C. glabratastrains were revived on YPD-agar medium.However,C. glabratastrains harbouring plasmidscontainingURA3as a selectable marker were revived on CAA-agar medium. After streaking, plates were allowed to grow for 24-48 h at 30°C and were stored at 4°C for a maximum period of two weeks. For long term storage, freezer stocks of C. glabratastrainswere prepared in 15% glycerol and stored at -80° C.Escherichia colistrain DH5αwas revived on LB-agar medium from frozenstock and incubated at 37°C for 14-16 h. DH5α strainwas used for transformation purpose and maintaining plasmids. Bacterial strains harbouring plasmids containing selection markerswere revived on LB-agar medium supplemented with appropriate antibiotics.Bacterial liquid cultures were either grown in LB broth or LB broth containing suitable antibioticsand incubatedin a shakerincubator set at 37°C, 200 rpm for 14-16 h. For preparation of bacterial frozenstocks, 1 ml overnight grown bacterial culture was added to500 μl of 50% glycerolto obtain final concentration of ~16 % glyceroland stored at -80°Cuntil use

PMA-treated THP-1 cells were seeded toa24-well tissue culture plate to a cell density of 1 million cells per well and allowed to grow for 12 h. After12 hincubation,spent medium was replaced with fresh pre-warmed RPMI-1640 medium andcells were allowed to recover for 12 h before use.C. glabratacells were grown in YNB medium for 14-16 h at 30°C and 200 rpm. 1 ml of theseC. glabratacells were harvested in 1.5 ml centrifuge tubes, washed twice with 1X sterile PBS and the cell density was adjusted to 2x107cells/ml. 50 μl of this cell suspension was used for infection to a MOI of 1:1. Two hours post infection, wells were washed thricewith 1X sterile PBS to remove the non-phagocytosed yeast cells and 1 ml of fresh pre-warmed RPMI-1640 medium was added. Plates were incubated under tissue culture conditions at 37°C and 5% CO2for 24 h. Supernatants were collected in 1.5 ml microfuge tubes, centrifuged at 3,000 rpmto remove the particulate matter, if any, and stored at -20°C until use. Estimation of different cytokines were performed using BD OptEIA ELISA kits as per the supplier’s instructions

To perform survival analysis of C. glabratacells in macrophages, PMA-treated THP-1 cells were seeded to 24-well tissue culture platesto afinal celldensity of 1 millionper well. C. glabratacells were grown in YNB medium for 14-16 h at 30°C and 200 rpm. 1 mloftheseC. glabratacells were harvested in 1.5 ml centrifuge tubes, washed twice with 1X sterile PBS and the cell density was adjusted to 2x106cells/ml. 50 μl of this cell suspension was used to infect PMA-activated macrophages to a MOI (multiplicity of infection) of 0.1. Two hours post infection, THP-1 cells were washed thrice with 1X sterile PBS to remove the non-phagocytosed yeast cells and 1 ml of fresh pre-warmed complete RPMI-1640 medium was added.At different time points, infected THP-1 macrophages were osmolysed with1 ml sterile water. Post lysis,lysates were collected by scraping the wells using 1 ml microtip. Lysates were diluted in 1X sterile PBSand appropriate dilutions were plated onYPD-agar plates. Plates were incubated at 30°C for 24-48 h and colony forming units (CFUs) were counted. Final CFUs/ml were determined by multiplying CFUs withappropriate dilution factor and percentage phagocytosis was calculated by dividing CFUs obtained at 2 h post infection by total numberofyeast cells used for infection. Fold replication was calculated by dividing the CFUs obtained at 24 h post infection by CFUs obtained at 2 h post infection

phorbol myristateacetate (PMA) (Tsuchiya et al., 1982). For PMA treatment, THP-1 cells were allowed to grow till 70-80% confluence and were collectedin a centrifuge tube by centrifugationat 1,000 rpm for 3 min. THP-1 cell pelletswere resuspended in 4-5 ml of pre-warmed complete RPMI-1640 medium, 100 μl of this cell suspension was appropriately diluted in PBS (1X) and viability was determined by counting trypan blue stained cellsusing hemocytometer. THP-1 cell suspension was diluted appropriately to obtainafinal cell density of 106cells/ml with pre-warmed complete RPMI-1640 medium. PMA was added totheTHP-1 cell suspension at a final concentration of 16 nM and mixed well by gently inverting the tubes. PMA-treated cells were seeded either in 24-well cell culture plates or in cell culture dishes and allowed to grow for 12 h under tissue culture conditions i.e. at 37°C and 5% CO2.After 12 h incubation, spent medium was replaced withfresh pre-warmed complete RPMI-1640 medium and cells were allowed to recover for another 12 h

THP-1 monocytes getdifferentiated intophagocytic macrophages upon treatment with

For cryopreservation of THP-1 and Lec-2 cells, 5-6 million cells wereresuspendedin 0.5 ml of eithercommercially procuredcell preservation medium from GIBCO(12648010)or complete medium supplemented with 10 % fetal bovine serum and 10 % DMSO.Cells were initially kept inanisopropanol bath and werelatertransferred to -70°C freezer. After 2-3 days, frozencells were transferred to liquid nitrogen container till further use. To revive the cells, frozenstockswere taken out of the liquid nitrogen container and immediately transferred to water bath set at 37°Cfor thawing. When freezing medium has thawed completely, cells were transferred to a 100 mm cell culture dishcontaining 12 ml completemedium and incubated under tissue culture conditions at 37°C and 5% CO2for 12 h. Afterincubation, medium was replaced by 12 ml fresh pre-warmed medium and incubated under tissue culture conditions till they reached 70-80% of confluencebefore splitting

Human monocytic cell line THP-1 (ATCC TIB-202TM), derived form 1 year old acute monocytic leukemia patient,wasused to perform single cell infection assays. Differentiation of these THP-1 monocytic cellsto phagocytic cells was induced by using phorbol myristateacetate (PMA)(16 nM). Lec2 (ATCC CRL-1736TM),an ovary epithelial cell line,which has beenderived fromtheChinese hamster Cricetulus griseus, wasused to determine the adherence of C. glabratacells. THP-1 and Lec-2 cells were routinely cultured and maintained in RPMI-1640 and α-MEM media, respectively, supplemented with10 % heat inactivated fetal bovine serum, 2 mM glutamine, penicillin (100 units/ml) andstreptomycin (100 μg/ml). Cultures were maintained in cell culture incubator (Thermo scientific)at 37°C and 5% CO2. Cultures were split after every 2-3 daysandspent medium was replaced with fresh pre-warmed medium. For splitting, cells were harvested at 1,000 rpm for 2-3 min, spent medium wasdiscarded and cell pellet was resuspended in 4-6 ml of pre-warmed medium. Cell density was determined by using hemocytometer. A total of3-4 million cells were seeded in a 100 mm cell culture dishcontaining 12 mlfresh medium

HEK293T packaging cellswere seeded at 30-40% confluency in 60 mm dishes. After 24 h, cells were co-transfected with three plasmids required for viral production i.e. VSV-G, psPAX2 (Addgene plasmid # 12260) and pLKO.1-puro-non-targeting and shIP6K1 clones using polyethyleniminereagent(PEI) and incubated at 37°C and 5% CO2 for virion formation. After 48 h, viral particles were harvested by collecting supernatant and filtered througha 0.45 μm syringe filter unit. Viral stock was aliquoted and stored at -80°C for further use. Viral titer was approximated on the number of cells plated for the production of lentivirus. Calculations were done as per Cell Bio Labs instruction. 2 x 106cells will yield 107infectious units/mL. All necessary precautions were taken while generating lentiviral particles such as wearing mask, double gloves, and sterile filter tips. All the consumables used were bleached (1% sodium hypochlorite solution) at least 1 h before being discarded

cells convert MTT to insoluble purple formazan dye crystals which can besolubilized using detergent or DMSO and measured by colorimetry. At each time point mediacontaining MTT dye (250 μg/mL) was added to each well and incubated at 37ºC. After 2 h cells were lysed with 200 μL DMSO for 15 min on a rocker at room temperature to solubilize the formazan and absorbance was monitored at 570 nm using the EnSpire multimode plate reader (PerkinElmer). Doubling time was determined by plotting log [A570] vstime and conducting a linear regression analysis using GraphPad Prism 5

Cells were seeded in 24 well plates at 10% confluence in triplicates and allowed to grow for different lengths of time. Spent medium was replaced with fresh medium every 48 h. Cells were incubated for different lengths of time ranging from 24 h to 120 h, to allow them to grow and cell survival was monitored by the MTT assay. Metabolically active