The immunoblots were quantified by densitometry software ImageJ 1.17 developed by Wayne Rasband, NIH Bethesda, MD (http://rsb.info.nih.gov/nih-image).All experiments were done at least in triplicates and results were expressed as mean ±s.e.m. A two tailedStudent’s t-test was done in Graph pad to arrive at p values and differences were considered statistically significant when p-value was less than 0.05 (*p≤ 0.05), highly significant(**p≤ 0.01)andextremely significant (***p≤ 0.001)

Quantification of blots and statistical analysis

A total of 100-200ng of DNA was used in each ligation reaction. Vector to insert ratio of 1:3 to 1:5was maintained. The reaction volume was generally maintained at 10μl containing 1μl of 10X ligation buffer (provided by the manufacturer) and 0.05 Weissunit of T4-DNA ligase. The reaction was carried outat 16ºC for 14-to 16-hrs or at room temperature for 4hours

Ligation of DNA

Agarose gels were preparedby boiling appropriate amount of agarose in TAEbuffer. After dissolution, it was cooled and then poured in a casting tray containing a comb for desired number of wells. The gel was allowed to solidify and then shifted to horizontal electrophoresis tank containing TAE buffer. The DNA samples were mixed with appropriate volumes of 6X DNA loading dye, loaded on the gel andelectrophoresedat appropriate voltage and current conditions (generally 80 V,400 mA). The gel was stained in ethidium bromide solution(1 μg/ml)for 15-min at room temperature and visualisedby fluorescence under UV-light in a UV-transilluminator

Agarose Gel Electrophoresis

For preparation ofcellular homogenate from adherent cell culture, the medium was first removed and cells were washed with ice cold 1X PBS. The cells were then scraped in 1X PBS and pellet down by gentle centrifugation (4000 rpm for 2 minutes) at 40C. Cell lysis buffer was then added to the cell pellets and lysis was allowed for 30 minutes on a rotor at 4⁰C. Post lysis, cellswere centrifuged at 13000 rpm for 10min at 4°C. The pellet was discarded and supernatantwascollectedas cell homogenate

Extraction of total cellular protein

Binding Buffer (10X)

Blocking buffer: 2% BSA

Permeabilization buffer: 0.2% Triton X100

Fixative : 4% Formaldehyde

For Immunofluorescence

Running Buffer

Ethylene Glycol Tetraacetic acid (EGTA), pH 7.0ComponentsFinal concentrationFor 50 mlEGTA0.1M1.902gH2Oq.sThe pH is adjusted to 7.0 using 10M NaOH

Wound healing assay(Liang et al., 2007) was employed to study the difference in migration rates ofprofilin-stable compared to parentalcells. Briefly, cells were cultured upto 90-95% confluent monolayer and a scratch was created through the cell monolayer with sterile needle. Cell debris was then removed by washing with PBS before adding the media. Images of the open gap created by this “wound” were then captured at three random locations immediately (0 h) and then at the same locations after regular interval using phase contrast microscopy untilthey are closed by migrating cells. Captured images were then used to quantify wound closure by the percentage change in the wound area per unit time and averaged for three locations for each experimental condition. During the course of the experiment, cells were maintained in 0.1% FBS containing DMEM media to ensure that wound closurewas due to the migration of cells rather thandivisonof cells

Wound healing assay

Extraction buffer

MTT reagent

For Cytotoxicity assays

6XEMSA sample loading dye

5X EMSA buffer

Native EMSA PAGE

10XBinding buffer

For Electrophoretic Mobility Shift Assay (EMSA)

For preparation of Ultra competent cells

Inoue buffer

6X DNA loading dye

Agarose gel

TAE

For DNA electrophoresis

Nuclear lysis buffer (without protease inhibitors

Cytoplasmic extraction buffer (without protease inhibitors)

For Cell fractionation

Blocking buffer: 2% BSA

Permeabilisation buffer: 0.2% Triton X100

4% Formaldehyde fixative

For Immunofluorescence(IF)

Stripping buffer

Blocking buffer

TBS-T

Transfer buffer

(f) Running buffer

(e) Stacking polyacrylamide gel

(d) Resolvingpolyacrylamide gel

(c) 6X Protein loading buffer (Lammeli buffer)

(b) Celllysis buffer B(For IB)

Cell lysis bufferA(For IP)

II. For Immunoprecipitation(IP)and Immunoblotting(IB)

Table 2.1: Commonly used buffers and solutionsI. General buffers(a)Phosphate Buffered Saline (PBS)

(b) Tris Buffered Saline (TBS)

For DNA isolation and purification, various kitssuch as Miniand midi-prep plasmid isolation, Gel extraction, PCR purification,etc., wereprocured fromQiagen(Hilden, Germany) or HiMedia(India). For RNA extraction, TRIzol wasobtained from Gibco BRL(Grand Island, NY). cDNA was made from RNA byeither Reverse transcriptase (SuperScript III, Invitrogen) or One step Access RT-PCR kit (Promega, Madison, WI). Reagents for PCR such as PCR 10X buffer, dNTPs, MgCl2, Taqpolymerase or AccuTaq were obtained from Fermentas or Sigma Aldrich. Recombination enzymes such as Restriction Endonucleases and DNA ligaseused for recombinant DNA experiments (Bam-H1, Hind-III, Xho-I, Eco-RI, Not-I, and Sal-I) were obtained from New England Biolabs(Ipswich, MA, USA). Oligonucleotidesusedfor various Gel shift assays viz.AP-1, NF-κB, p53 and Sp-1 were commercially synthesizedfrom XCelris(Ahmedabad, India).For protein extraction, protease inhibitors such as aprotinin, leupeptin, PMSF, NaF, NaVO4,etc. were obtained from Sigma Aldrich.Bradford reagent for estimation of protein concentration wasobtained from Bio-Rad(Rockford Illinois, USA).ForImmunoblotting, PVDF membrane, X-ray films andchemi-luminiscentdetection reagent (ECL prime) were obtained from GE Healthcare(Little Chalfont, UK). For Immunofluorescence, vectashield-mountingmedium with DAPIand Propidium Iodide (PI)were obtained from Molecular Probes, Invitrogen.For detection of cytotoxicity, MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide) dye, SDS and DMF (Dimethylformamide) wereobtained from SigmaAldrich. Live and dead cell assay kit was obtained from Molecular Probes.Various chemicals required for preparation of regular buffers and solutionsviz. Tris, Glycine, SDS, Sodium Chloride, Potassium Chloride, HEPES, Disodium Phosphate, Nonidet P-40, Tween 20, TritonX100, Formaldehyde, Glycerol, Agarose, Acrylamide,Bis-acrylamide,APS, TEMED, BSA,etc. were obtained from SigmaAldrich.The procedure of preparation of buffers and reagents usedin the present studied are described below:

Reagents and Buffers

Analysis of sensitivity to translation inhibitors was conducted in theDDY1810 S. cerevisiaestrain background, whichdoes not contain the kanrselection marker. Sensitivity to 6-azauracil (6AU) was monitored in the DDY1810, BY4741 or NOY222 strain backgrounds (Table 2.1). As uracil is a competitive inhibitor of 6AU, the plasmid p416GPD, carrying the URA3gene (Mumberget al., 1995)was introduced into BY4741-derived strainswhereas DDY1810 derived yeast strains were supported by the pYesGex plasmid carrying the URA3gene.Yeast strains were grown in YPD or SC-Ura medium,for 14-16 h at 30°C under continuous shaking at 200 rpm. Cultures were diluted to 0.25OD600, followed by 5 fold serial dilutions, and 3μL of each dilution was spotted on a YPD-agar plate containing the translation inhibitors G418 (8 μg/mL), paromomycin (100μg/mL or 200μg/mL), or hygromycin B (8 μg/mL), or an SC-Ura agar plate, containing 6AU 50 μg/mL or100 μg/mL and growth was monitored at 30°C or 37°C for 2-3 days. To perform an analysis of 6AU sensitivity with yeast carrying pYesGex6p2 plasmid, cells were grown overnight in SC-Uramedium and the serial dilutions were plated on SC-Ura medium containing 6AU, with galactose instead of glucose to express proteins under the GAL4promoter

Drug sensitivity analysis

Volume was adjusted with water to 1 L and solution was sterilized by autoclaving.Pre-hybridization/hybridization buffer (Modified Church and Gilbert buffer)0.5 M phosphate buffer (134g of Na2HPO4.7H2O,4 mL of 85%H3PO4), pH7.27% (w/v) SDS10 mM EDTA Volume was adjusted to 1 L with DEPC treated sterile water. Buffer was aliquoted into 50 mL RNase free conical tubes (Corning) and stored in -20oC.Post hybridization wash buffersWash buffer 1 2X SSC 0.1% SDS Wash buffer 2 1X SSC 0.1% SDSWash buffer 3 0.5X SSC0.1% SDSBuffers were prepared with sterile DEPC treated water

TMN buffer10mM Tris-HCl, pH 7.45 mM MgCl2100 mM NaCl Permeabilization buffer950 μLof coldwater50 μLof 10% (wt/vol)sodium N-lauroyl sarcosineTranscription assay buffer(100 μL)50mM Tris-HCl, pH 7.4100mMKCl5mM MgCl21mM MnCl22 mM dithiothreitol 0.5mM ATP 0.25 mM GTP0.25mM CTP10mM phosphocreatine2.4 units creatine phosphokinase100μCi [α-32P] UTP (3,000Ci/mmol)Alkaline denaturing solution for DNA for membrane preparation0.5 M NaCl 0.25 M NaOH Volume was adjusted to 20 mLwith sterile water. Saline Sodium Citrate (SSC) buffer (20X) 3.0 M Sodium chloride 0.3 M Sodium citrate

Buffers fortranscription run on analysis

Taq polymerase was from ThermoScientific. Plasmid DNA purification, PCR purification, gel extraction and reaction clean up kits were procured from Qiagen. Medium components for growth of S. cerevisiae,namely, YPD, yeast nitrogen base, and yeast nitrogen base without ammonium sulphate were purchasedfrom BD (Becton, Dickinson and Company, USA).Yeastsyntheticdropoutmediasupplementwithouturacil/histidinewereobtainedfromSigma-Aldrich

Agarose, phenol, dimethyl sulphoxide (DMSO), sodium acetate, sodium chloride, sodium carbonate, sodium bicarbonate, sodium dodecyl sulphate (SDS), formamide, calcium chloride, ethylenediaminetetraacetic acid (EDTA), glycerol, polyethylene glycol, ammonium persulphate, N,N,N′,N′-Tetramethylethylenediamine (TEMED), acrylamide,dithiothreitol (DTT),bis-acrylamide, chloroform, formaldehyde, lithium chloride, lithium acetate,isopropanol, nuclease free water, diethylpyrocarbonate (DEPC), Tween-20, acid washed glass beads, trisodium citrate dehydrate, β-mercaptoethanol, 0.4% trypan blue solution, yeast protease inhibitor cocktail, magnesium chloride, manganese chloride and phosphatase inhibitors were purchased from Sigma-Aldrich Chemicals. Agar, uracil, leucine, lysine, histidine, tryptophan, methionine, yeast extract, peptone, tryptone, and sorbitol were obtained from HiMedia. Dextrose, sucrose, potassium chloride, sodium hydroxide, hydrochloric acid, Tris and glycine were from Fisher Scientific. [14C]-labelled uracil was from Ogene Systems.γ[32P]ATP, [35S]Met/Cysin vivoprotein twin label mix, α[32P]UTP and Taq DNA polymease were from JONAKI/BRIT,Ultimaflow liquid scintillation fluid was obtained from Perkin-Elmer.Hybond-N+and Hybond-P membranes for nucleic acid and protein transferrespectively, and protein A beads were purchased from GE Life Science. NuPAGE gradient gels, MES running buffer and 4X LDS sample buffer were purchased from Invitrogen. Super Signal West pico chemiluminiscent substrate was from Thermo Scientific. Different restriction enzymes used for cloning and knock-out generation were purchased from New England Biolabs (NEB). High-fidelity Phusion

Chemicals, kits and culture medium components

1. The composition of different types of gels run during the course of this study is

Media

The LR reaction mixturewas incubated at room temperature for 1hr, followed by proteinase K treatment (2μL) at 37°C for 10 min. 5uL of the reaction mix was transformed into DH5α competent cells. Bacterial cells were spread on LB agar plates containing antibiotic ampicillin (50ug/ml). Plates were incubated at 37°C for overnight. The bacterial colonies were inoculated into 5mL LB broth containing 5uL ampicillin and incubated overnight in shaking incubator at 220 rpm. Next day, Plasmids were prepared using Plasmid miniprep kit (QIAprep miniprep). The destination plasmids obtained by LR reaction were given for plasmid-DNA sequencing to confirm thepositive clones. The positive clones were amplified through DH5α transformation and plasmid DNA maxiprep (Invitrogen). The expression plasmids generated through LR were used for studies in the mammalian and the bacterial cells

BP reaction mix was incubated at room temperature for 1hr, followed by proteinase Ktreatment (2μL) at 37°C for 10 min. 5uL of the reaction mix was transformed into DH5α competent cells (Transformation into DH5α competent cells; plasmid constructs added into DH5α competent cells and incubated on ice for 30 min. followed by heat shock at 42°C for 1 min. 800μL LB broth was added and transformed DH5α cells were incubated at 37°C in shaking incubator at220 rpm for 1hr.;after 1 hr. cells were centrifuged at 6000 rpm for 1 min.;the supernatant was discarded,and the pellet was resuspended in 100μL of LB broth). Bacterial cells were spread on LB agar plates containing antibiotic kanamycin (30ug/ml). Plates were incubatedat 37°C for overnight. The bacterial colonieswereinoculated into 5mL LB broth containing5uL kanamycinand incubated overnight in shaking incubator at 220 rpm. Next day, Plasmids were prepared using Plasmid miniprep kit(QIAprep miniprep). The donor plasmids generatedby BP reaction were given for plasmid-DNA sequencing to confirm the positive clones.The donor plasmids obtained by BP reaction were cloned into the Gateway destination vectors by LR reaction (Table 7).Table 7: LR reaction mixture

Gateway cloning is the highly efficient gene cloning technology. It comprises two primary steps of cloning; the BP reaction and the LR reaction. The PCR products of gene of interest were cloned into the Gateway donor vector by BP reaction(Table 6).Table 6: BP reaction mixture

Gateway cloning

SiRNAWWP2 siRNA described earlier [216]and prevalidated siRNAs for PPM1G (catalog numbers S102658684 and S102658691) were purchased from Qiagen. ShRNAWWP2 shRNA (shRNA1, 5=-CAGGAUGGGAGAUGAAAUAUU-3=;shRNA2, 5= ACAUGGAGAUACUGGGCAAUU-3=)WWP1 shRNA (shRNA1, 5=-ATTGCTTATGAACGCGGCT-3=; shRNA2, ACAACACACCTTCATCTCC-3=)Both WWP2 and WWP1 shRNA were purchased from Open Biosystem.2.1.5Cell linesHeLa cells, HEK293T, and BOSC23celllineswere used in the present study wherever indicated. All the cells werecultured and maintained in RPMI 1640 supplemented with 10% serum and 1% antibiotic (penicillin-streptomycin)at 37° C with 5%CO2.2.2 Buffers and mediaThe buffers and media used in the present study is mentioned in the table 3.Table 3: Buffers and media used in the study

SiRNAandshRNA

biosensor strain 8523/KLN55was inoculated in fresh medium, and grown with the ethyl acetate extract isolated from the test strain as described earlier. After 30 h of growth, cells were pelleted by centrifugation, washed once with sterile water and resuspended in sterile miliQ waterfor measuring the GFP fluorescence intensity at excitation and emission wavelength of 472 and 512 nm, respectively. 1 DSF unit is equivalent to increase in fluorescence by 1 arbitary unit in DSF biosensor strain

For DSF extraction, X. oryzaepv. oryzicolastrains were grown in PS media to an OD600 of 1.2 as described earlier. Supernatant was collected by pelleting down the cells at 7000 g for 10 min. Next, water-saturated ethyl acetate was added to the cell-free culture supernatant in a ratio of 2:1, and mixed properly for 5-10 min. The mixture was centrifuged at 5000 g to separate the DSF containing organic phase. The ethyl acetate layer (organic phase) was evaporated at 37°C, remaining residue was dissolved in methanol, and assayed for DSF by using Xccbiosensor strain 8523/KLN55 (Newman et al., 2004). Biosensor strain is a DSF minus strain comprised of DSF responsive endoglucanase promoter fused to promoterless gfpand expressed through plasmid (Peng::gfp). To check the DSF production by a particular strain, 0.2% inoc

Isolation and detection of DSF

Complementary-DNA synthesis was performed using reverse transcriptase enzyme (Invitrogen) and random hexamers (Qiagen). For this, 1 μg good quality RNA was treated with 1 μl (1 unit) DNase I (Invitrogen) for 20 min to remove DNA contamination. Next, Superscript III Reverse Transcriptase kit (Invitrogen) was used to synthesize cDNA according to the manufacturer’s instructions. cDNA synthesized was further confirmed by using it as a template for amplification in PCR. cDNA was stored at -20°C till further use

Synthesis of complementary DNA (cDNA)

A single colony of E.coliDH5α strain was inoculated in 5 ml LB medium and incubated at 37°C for overnight. 1% of overnight grown culture was inoculated in 500 mlfresh LB medium and incubated at 37°C for 2-3 h till the OD600 reached to 0.4-0.5. Culture was chilled on ice for 5 min followed by centrifugation at 3000 g for 15 min at 4°C. Harvested cells were washed gently with 200 ml ice-cold TFb-I buffer. Cells were collected by centrifugation at 3000 g for 5 min at 4°C and gently resuspended in 20 ml ice-cold TFb-II buffer. Bacterial cell suspension was kept on ice for 15 min and was aliquoted in 100 μl volumes in chilled sterile microcentrifuge tubes. Cells were immediately snap-frozen in liquid nitrogen and stored at -80°C

Preparation of E.coliultracompetent cells

50 mM Phosphate citrate buffer (pH-6.8)0.1M Citric acid0.2M dibasic Sodium phosphate16.9 ml Citric acid (0.1 M) and 33.1 ml Sodium phosphate (0.2 M) was mixed and volume was adjusted to 100 ml with H2O.Lipase assay0.1M Tris-HCl buffer (pH-8.2)pH was adjusted to 8.2 with HCl. 0.5 mM p-Nitrophenol standard solution8.69 mg p-Nitrophenol was dissolved in Tris-HCl buffer (0.1M) and volume was adjusted to 25 ml to make a final concentration of 25 mM.1volume of the above solution (25 mM) was diluted with 49 volume of 0.1 M Tris-HCl buffer to get a final concentration of 0.5 mM p-Nitrophenol standard solution.p-Nitrophenyl butyrate solution (420 μM)7.3 μl p-Nitrophenol butyrate (F.W. 209.2) 11 mg SDS650 μL Triton-X-100Volume was adjusted to 100 ml with H2O. Mixture was heated to 65°C in a water bath for 15 min, mixed well, and cooled down to room temperature prior to use. It can be stored upto 3 days at 4°C.Xylanase assay5 mg/ml RBB-xylan0.05 M di-Sodium hydrogen phosphate (Na2HPO4)

5 mg/ml RBB-Xylan was dissolved in 0.05 M Na2HPO4pH-7.5

Buffers for enzyme assaysCellulase assay

10 mM Ferric ethylenediaminetetraacetic acid (Fe(III)EDTA)100 mM Magnesium chloride (MgCl2)Working solution 0.18% Xylose 670 μM L-Methionine10 mM Sodium glutamate14.7 mM Potassium dihydrogen phosphate (KH2PO4)40 μM Mangenese sulphate (MnSO4)240 μM Ferric ethylenediaminetetraacetic acid (Fe(III)EDTA)5 mM Magnesium chloride (MgCl2)1.2% AgarLuria Bertani (LB)0.5% Yeast extract1% Tryptone1% Sodium cholride (NaCl)Media and solutions were sterilized either by routine autoclaving at 121°C and 15 psi for 20 min or by filtration through membrane of 0.22 μM porosity

Peptone Sucrose (PS)1 % Peptone1 % SucroseFor preparing plates, 1.2 % agar was added to the medium before autoclaving.Minimal Medium (MM9)Stock SolutionMinimal Salt (2X) for 250 mL 5.25 g di-Potassium hydrogen phosphate (K2HPO4) 2.25 g Potassium dihydrogen phosphate (KH2PO4)0.5 g Ammonium sulphate (NH4)2SO40.25 g Tri-Sodium citrate (Na3citrate)1 M Magnesium sulphate heptahydrate (MgSO4.7H2O) -250 μl 25 mg/mL L-Methionine-1 ml25 mg/mL Nicotinic acid-1 ml10 mg/mL Glutamic acid-25 ml20% Glucose-12.5 ml3% Agar-100 mlPlant mimicking medium (XOM2)Stock preparation100 mM L-Methionine1 M Sodium glutamate1 M Potassium dihydrogen phosphate (KH2PO4)10 mM Manganese sulphate (MnSO4)

Bacterial media

Media

was observed by the formation of a clear zone of hydrolysis around the bacterial/fungal colony. Tannase production, in terms of the diameter of the zone of hydrolysis around the colony, was measured (in mm) after 24 (bacteria) and 48 hours (fungi) of incubation. The diameter of the hydrolytic zone was measured at three points and the average was calculated. The microorganisms showing a zone of tannic acid hydrolysis were considered as tannase producers. The potent tannase producers were further tested quantitatively for the amount of enzyme produced in broth.

The procedure of Bradoo et al. (1996), involving point inoculation of the microorganisms on tannic acid agar plates was followed. The plates were incubated at 37 and 30±1°C for bacterial and fungal isolates. The presence of tannase activity

Qualitative screening for tannase producer/s

Nutrient agar (NA) medium The composition per litre of the medium is as follows: Peptone : 5.00 g Sodium chloride : 8.00 g Beef extract : 1.50 g Yeast extract : 1.50 g Agar-agar : 20.0 g Double distilled water : to make the final volume 1000 ml (iii) Tannic acid agar (TAA) medium This medium was used for screening of tannase producers. The composition per litre of the medium is as follows: Tannic acid : 10.00 g Agar-agar : 30.00 g Citrate phosphate buffer : to make the final volume 1000 ml (0.1M, pH 5.0) 30.0 g of agar-agar was melted and subsequently autoclaved. Citrate phosphate buffer and 0.1% (w/v)tannic acid, filter sterilized through 0.22μmembrane filters, were added to the sterilized molten agar and the final volume was made 1.0 L. (IV) Czapek Dox minimal medium (modified for tannase production)The composition per litre of the medium is as follows: Ingredients Fungi Bacteria Tannic acid : 10.00 g 10.00 g D-Glucose : 10.00 g 0.50 g NaNO3 : 6.00 g – NH4Cl : – 1.0 g KH2PO4 : 1.52 g 0.50 g K2HPO4 : – 0.50 g KCl : 0.52 g – MgSO4.7H2O : 0.52 g 0.50 g CaCl2 : – 0.01 g Cu(NO3)2.3H2O : trace – FeSO4.7H2O : trace – ZnSO4.7H2O : trace – Double Distilled water : to make 1.0 L to make 1.0 L pH : 5.0±0.2 5.0±0.

Potato dextrose agar (PDA) medium The composition per litre of the medium is as follows: Ingredients g/l Peeled and sliced potatoes : 200.0 Dextrose : 20.0 Agar-agar : 20.0 Double Distilled water : to make the final volume 1000 ml pH was adjusted to 6.2 ± 0.2 using 1N NaOH / HCl

Medium Compositio

Overnight-grown C. glabratacells were freshly inoculated either in YNBmedium or YNBmedium supplemented with BPS (50 μM) or FeCl3(500 μM) and allowed to grow for 4 h at 30°C, 200 rpm. After 4 h growth, cells were spun down at 4,000 rpm for 5 min in a refrigeratedcentrifuge set at 4°C and total protein was isolated. For estimation of histone deacetylase (HDAC) activity, 40 μg of protein samples were taken and HDAC Fluorometric Activity Assay Kit (#10011563; Cayman Chemical Company, Ann Arbor, MI, USA) was used as per manufacturer’s instructions. Fluorescence intensity values obtained inthepresence of the HDAC inhibitor, trichostatin A, were subtracted from those of the samples without inhibitorand plotted as relative arbitrary fluorescence units

Estimation of histone deacetylase (HDAC) activity

spectro-photometrically at 340 nm. For wild-type cells,mitochondrial aconitae activity was normalized to 100 % and for mutants the relative aconitase activity percentages were calculated

To determine aconitase activity, mitochondria were isolated as described by Meisinger et al. Briefly, YPD-grown C. glabratacells (500 OD600) were subjected to spheroplasting followed by homogenization (15 strokes) with glass Teflon homogenizer. To collect mitochondria, homogenate was centrifuged at 13200 g for 20 min in a refrigerated centrifuge set at 4°C. The mitochondrial pellet was resuspended in SEM buffer (250 mM sucrose, 1 mM EDTA, 10 mM Mops-KOH, pH 7.2) and stored at -80°C until further use. Mitochondrial aconitase activity was estimated by using method as described by Bulteau et al. Mitochondrial protein samples (5 μg) were prepared in KH2PO4buffer (25 mM, pH 7.2) containing 0.05 % Triton X-100. The samples were incubated with sodium citrate (1 mM), MnCl2(0.6 mM), NADP (0.2 mM) and isocitrate dehydrogenase (1 U/ml) for 20 min at room temperature. Isocitrate dehydrogenase catalysed reduction of NADP was recorded

Measurement of aconitase activity

For quantification of intracellular iron content, BPS-based colorimetric method as described by Tamarit et al.,was used. Briefly, overnight grown C. glabratacells were inoculated in fresh YPDmedium and allowed to grow at 30°Cand200 rpm for 6 h. Cultures were spun down and 50 OD600cells were subjected to nitric acid digestion (500 μl, 3%) for 16 h at 96°C.Next, lysates were spun down at 13,000 rpm to remove the cell debrisand 400 μl of the lysatewas incubated with 126 μl of ammonium acetate (1 M), 320 μl of BPS (1.7 mg/ml) and 160 μl of sodium ascorbate (38 mg/ml)for 5 min at room temperature. Absorbance of the samples was takenagainst the reagent blank at 535 nm and 680 nm which correspond to BPS-Fe-specific and BPS-Fe-non-specific absorbance, respectively. Non-specific absorbance was subtracted from specific absorbance and the iron content in each sample was calculated from the standard curve prepared using FeCl3and expressed as μM per OD600cells. In each experiment performed, total iron content of wild-typecellswas normalized to 100% and the iron content of mutants were calculated with respect tothe iron content of wild-type cells

Estimation of total iron

Radioactive counts measured in2x106labelled C. glabratacells and lysates were considered as ‘input’ and ‘output’ values, respectively. Percentage adherence was calculated by following equation.%Adherence=Output radioactive countsInput radioactive countsX 100

Adherence of C. glabratacells to Lec2, Chinese hamster ovarian (CHO) cells, wasdetermined as described previously (Cormack et al., 1999). Briefly, Lec2 cells were seeded at a cell density of 5x105cells per wellin a 24-well tissue culture plate.Cells were incubated in a cell culture incubator (Thermo Scientific) set at 37°C and 5%CO2for 12 h. Post incubation, the medium was discarded in a reservoir and Lec2 monolayer was washed thrice with sterile 1X PBS without disturbing the monolayer. Lec2 cells were fixed with 3.7% para-formaldehyde for15 min followed by twoPBS washes. 1 mlof 1X PBS containing antibiotics, penicillin (100 units/ml) and streptomycin (100 μg/ml), was added to each well, plates were sealed with PARAFILM, Cole-Parmer(PM-996) and stored at 4°C until use.C. glabrata cells,to be tested for their adherence potential, were grown in CAAmedium for 24 h.100 μl of 24 h-grownculture was re-inoculated in fresh 5 ml CAAmedium containing 200 μCi of S35(Met:Cys-65:25) INVIVO PROTWIN label mix (JONAKI, India)in a 15 ml polypropylene tube.Cultures were allowed to grow for 16-20 h at 30°C with shakingat200 rpm to radiolabel the cells. Radiolabelled C. glabratacells were harvested by spinning down1 ml of labelled yeast cultures,andthe cell pellet was washed thrice with sterile 1X PBS to remove any residual S35(Met:Cys-65:25) labelling mix from the medium. Post washes, the pellet was resuspended in 1 ml PBS, OD600was measured andcell suspension of 0.4 OD600wasprepared.Next, 24well plates containing fixed Lec2 cells were taken out from 4°C and PBS from the wells wasdiscarded by inverting the plates. Wells were washed once with PBS and 2x106labelled yeast cells were added to eachwell, andincubatedfor 30 min at room temperature.Post incubation, plates were centrifuged at 1,000 rpm and the wells were washed thrice with 1X PBS to remove non-adherent C. glabratacells. Lec2 cells were lysed with 5% SDS in PBS by scraping the wells, lysates were collected and transferred to a vial containing scintillation fluid

Adherence assay

For mouse infection assay, 10 ml YPD medium was inoculated with different C. glabratastrains and allowed to grow at 30°C for 12-16 h. After growth,cultures were washed twice in sterile 1X PBS and the cell pellet was resuspended in appropriate volume of 1X PBSto obtain a cell density corresponding to20OD600. 100 μlcell suspension(4x107yeast cells)was injected into female BALB/c mice (6-8 weeks old) through tailvein. Seven days post

infection, mice were sacrificed and kidneys, liver, brain and spleen were harvested. Organs were homogenised in 1 ml PBS and appropriate dilutions of tissue homogenate were plated onYPD-agar mediumsupplemented with penicillin and streptomycin antibiotics (100 units/ml penicillin and 100 μg/ml streptomycin). Plates were incubated at 30°C for 24-48 h and CFUs were counted. Fungal burden in different organs wasdetermined by multiplying the CFUsobtainedwithanappropriate dilution factor

For mouse infection assay, 10 ml YPD medium was inoculated with different C. glabratastrains and allowed to grow at 30°C for 12-16 h. After growth,cultures were washed twice in sterile 1X PBS and the cell pellet was resuspended in appropriate volume of 1X PBSto obtain a cell density corresponding to20OD600. 100 μlcell suspension(4x107yeast cells)was injected into female BALB/c mice (6-8 weeks old) through tailvein. Seven days post

Mouse infection assay

Experiments involving mice were performed at the CDFD animal facility, VIMTA Labs Ltd., Hyderabad, India(www.vimta.com) in strict accordance with the guidelines of the Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA), Government of India. The protocol was approved by Institutional Animal Ethics Committee (IAEC) of the Vimta Labs Ltd. (IAEC protocol approval number: PCD/CDFD/05). Procedures used in this protocol were designed to minimize animal suffering

Ethics statement

Other methods

Reverse transcriptase “Superscript III” (Invitrogen, 18080-051) was used to perform cDNA synthesis. Briefly, 500 ng of DNase I-digested RNA was incubated with 1 μl of 10 mM dNTP and 50 μM oligo(dT) at 65°C for 5 min in a 10 μl reaction mixture followed by cooling on ice for 5 min. Post incubation, 10 μl of cDNA synthesis mixture was added which contained 2 μl of 10XRT buffer, 4 μl of 25 mM MgCl2, 2 μl of 0.1 M DTT, 1 μl of RNase out (40 units) and 1μl of Superscript III (200 units). Tubes were incubated at 50°C for 1 h and thereaction was terminated at 85°C for 5 min. The quality of synthesized cDNA was checked by using it as a template in a PCR reaction to amplify the housekeeping gene CgACT1. Amplification of CgACT1was indicative of proper cDNA synthesis

Complementary DNA (cDNA) synthesis

Reverse transcriptase “Superscript III” (Invitrogen, 18080-051) was used to perform cDNA synthesis. Briefly, 500 ng of DNase I-digested RNA was incubated with 1 μl of 10 mM dNTP and 50 μM oligo(dT) at 65°C for 5 min in a 10 μl reaction mixture followed by cooling on ice for 5 min. Post incubation, 10 μl of cDNA synthesis mixture was added which contained 2 μl of 10XRT buffer, 4 μl of 25 mM MgCl2, 2 μl of 0.1 M DTT, 1 μl of RNase out (40 units) and 1μl of Superscript III (200 units). Tubes were incubated at 50°C for 1 h and thereaction was terminated at 85°C for 5 min. The quality of synthesized cDNA was checked by using it as a template in a PCR reaction to amplify the housekeeping gene CgACT1. Amplification of CgACT1was indicative of proper cDNA synthesis

Complementary DNA (cDNA) synthesis

ml YPD broth at an initial OD600of 0.1. Cultures were allowed to grow for 4-5 hin a shaker incubator setat 30°C, 200 rpm until the OD600of the cultures reached 0.4-0.6. Next,cells were harvested ina15 ml centrifuge tube by centrifugation, washed twice with 10 ml of sterile water, resuspended in 1 ml of sterile water and were transferred to a 1.5 ml microfuge tube. Cells were harvested by centrifugation at 4,000 rpm for 5 min,resuspended in 50 μl of100 mM lithium acetate solution and transformation mixture was added. Transformation mixture consisted of 240 μl polyethylene glycol (50%), 36 μl of lithium acetate (1 M), 5 μl of heat denatured single stranded carrier DNA (10 mg/ml), 500 ng to 1 μg of transforming DNA and final volume was made to 360 μl with sterile water. The tubes were incubated at 30°C for 45 min. To this, 43 μl of sterile DMSO was added and heat shock was given at 42°C for 15 min. Next, tubeswere transferred to ice for 10-15 sec, centrifuged at 4,000 rpm and transformation mixture reagents wereremoved completely by pipetting. Cells were resuspended in 200 μl of sterile water and spread-plated on appropriate selection medium. Plates were incubated at 30°C for 24-48 h

Yeast transformation was performed as described previously (Gietz et al., 1992) with fewmodifications. Briefly, overnight grown C. glabratacultures were freshly inoculated in 10

Yeast transformation

To perform survival analysis of C. glabratacells in macrophages, PMA-treated THP-1 cells were seeded to 24-well tissue culture platesto afinal celldensity of 1 millionper well. C. glabratacells were grown in YNB medium for 14-16 h at 30°C and 200 rpm. 1 mloftheseC. glabratacells were harvested in 1.5 ml centrifuge tubes, washed twice with 1X sterile PBS and the cell density was adjusted to 2x106cells/ml. 50 μl of this cell suspension was used to infect PMA-activated macrophages to a MOI (multiplicity of infection) of 0.1. Two hours post infection, THP-1 cells were washed thrice with 1X sterile PBS to remove the non-phagocytosed yeast cells and 1 ml of fresh pre-warmed complete RPMI-1640 medium was added.At different time points, infected THP-1 macrophages were osmolysed with1 ml sterile water. Post lysis,lysates were collected by scraping the wells using 1 ml microtip. Lysates were diluted in 1X sterile PBSand appropriate dilutions were plated onYPD-agar plates. Plates were incubated at 30°C for 24-48 h and colony forming units (CFUs) were counted. Final CFUs/ml were determined by multiplying CFUs withappropriate dilution factor and percentage phagocytosis was calculated by dividing CFUs obtained at 2 h post infection by total numberofyeast cells used for infection. Fold replication was calculated by dividing the CFUs obtained at 24 h post infection by CFUs obtained at 2 h post infection

THP-1 macrophageinfection assay to monitor the intracellular survival and replication of C. glabrata

Stripping buffer100 mM β-mercaptoethanol2 % SDS62.5 mM Tris-HCl (pH 6.7)Final volume was madeto 250 ml with water

Transfer buffer (10 X stock solution)0.25 M Tris-HCl (pH8.0)1.92 M Glycine1% SDSThe stock solution was prepared asa10 X concentrate and was diluted to 1 X concentration prior to use.1X Transfer buffer (1 litre)200 ml Methanol100 ml 10X Transfer buffer700 ml WaterTris-Buffered Saline (TBS)50 mM Tris150 mM NaClFinal pHof the bufferwas adjusted to 7.4 with HCl.Blocking buffer5% Fat-free milk0.1% Tween-20Final volume was made to 100 ml with 1 X TBS.Wash buffer (TBS-T)TBS (1 X final concentration)0.1% Tween-20Final volume was prepared with water

Buffers for western blot experiment

dipotassium hydrogen phosphate, disodium hydrogen orthrophosphate, acetone and citric acid were obtained from Qualigen Chemicals. Kitused for quantitationof histone deacetylase activity waspurchased from Cayman Chemical Company (#10011563). Hybond-P membranefor protein transferand ECL kit for immunoblottingwere purchased from Amersham Biosciences. Kits used for estimation of cytokines were procured fromBD Biosciences.Medium components used to culture C. glabrataand bacterial strains viz.,yeast extract, peptone, dextrose, casamino acid hydrolysate, yeast nitrogen base with aminoacids and ammonium sulphate, yeast nitrogen base without amino acids, yeast nitrogen base without aminoacids and ammonium sulphate and Luria-Bertani (LB) medium were purchased from BD (Becton, Dickinson and Company, USA). Animal cell culture media RPMI-1640, DMEM and α-MEM were purchased from Hyclone and Gibco-Invitrogen. Fetal bovine serum, glutamine and antibiotics for cell culture medium were procured from Gibco-Invitrogen

Allchemicals used in thisstudy were obtained from commercial sourcesand were of molecular biology grade. The enzymes used for PCR amplification and molecular cloning viz.,restriction endonucleases, T4DNA ligase, Taq DNA polymerase were obtained from New England Biolabs, Fermentas, Sigma and Finnzymes. Kits used for first strand c-DNA synthesis, quantitative real time-PCR were purchased from Invitrogen andEurogentech, respectively.Kits used forplasmid isolation,PCR product purification, reaction clean up, and gel extraction of DNA fragmentswere procured fromQIAGEN.Agarose, phenol, dimethyl sulphoxide (DMSO), sodium acetate, sodium chloride, sodium hydroxide, sodium carbonate, sodium dodecyl sulphate (SDS), trizma base, bathophenanthrolinedisulfonic acid disodium salt (BPS), ferric chloride, formamide, ethylenediaminetetraacetic acid (EDTA), glycerol, polyethylene glycol, hydroxyurea, methylmethane sulphonate (MMS), ammonium persulphate, acrylamide, bis-acrylamide,N,N,N′,N′-Tetramethylethylenediamine(TEMED), diethylpyrocarbonate (DEPC), lithium acetate, polyethylene glycol (PEG), menadione, phorbol myristate acetate (PMA), isopropanol,tween-20, trypan blue, hydrogenperoxide, uracil and orthrophenylenediamine (OPD) were procured form Sigma Chemicals. INVIVO PROTWIN label mix, S35(Met:Cys-65:25) were obtained from from BRIT-Jonaki, CCMB, Hyderabad. Fluconazole was purchased from Ranbaxy.Ferrozine was purchased from HIMEDIA.Hydrochloric acid, sulphuric acid, acetic acid, methanol, potassium dihydrogen orthrophosphate,

Chemical components, culture mediumand kits

Cell viability can be monitored by changes in the morphology of the cell or by membrane permeability to certain dyes such as PI. When exposed to PI, viable cells do not take up PI due to the presence of an intact membrane whereas dead cells take-up PI due to loss of membrane integrity. Briefly, cells were treated with HU for 12 h, and allowed to recover for different lengths of time as described in Section 2.2.2. At each time point, cells were harvested by trypsinisation and washed with PBS. Approximately 106cells were resuspended in 1 ml PBS and stained with 2μg/mL (final concentration) PI for 2 min at room temperature. The extent of PI staining was used to determine the viable and dead population by flow cytometry analysis (Accuri C6, Becton Dickenson). Nonviable cells were approximately 100 fold brighter than the unstained (viable cells) cells

PI live dead analysis

Click-iT cell proliferation kit (C35002, Invitrogen), Apo-BrdU TUNEL assay kit (A35127, Invitrogen)

Kits

Cell culture reagents: fetal bovine serum (FBS, 26140-079), L-glutamine (25030-081), penicillin-streptomycin (15140-122) and trypsin (25200-056) were from Life Technologies. DNA damaging agents used for this study were obtained from following sources: hydroxyurea (HU; H8627, Sigma-Aldrich), neocarzinostatin (NCS, N9162, Sigma-Aldrich), mitomycin C (M0503, Sigma-Aldrich). Reagents used for cell spreading assays: methyl cellulose (Sigma-Aldrich), fibronectin (F2006, Sigma-Aldrich)andfluorophore conjugated phalloidin (Molecular Probes Inc).Antibiotic selection markers: puromycin (Sigma-Aldrich), G418 (Sigma-Aldrich), transwell inserts (24 well, 8 μm pore size, Costar, Corning), Invasion chambers (BioCoat Matrigel invasion chamber, 24 well, 8 μm pore size, Corning). Other chemicals: Propylene glycol (151957, MP Biomedicals), 4-Nitroquinoline-1-Oxide(4NQO; N8141, Sigma-Aldrich), MTT [(3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide], TNP [N2-(m-(trifluoromethy)lbenzyl)N6-(p-nitrobenzyl)purine],DMSO (dimethyl sulfoxide), ethanol, paraformaldehude, vectashield DAPI (Vector labs),Tris, PMSF, NP-40, PBS, Tween-20, BSA, MgCl2, colcemid, KCl, methanol, glacial acetic acid, giemsa, SDS, sodium bicarbonate (S5761, Sigma-Aldrich),polyfect transfection reagent, crystal violet, propidium iodide, Triton X-100 and PEI were obtained from Sigma-Aldrich. Low melting agarose (Difco), ECL detection system (GE Healthcare)

Chemicals

Non-stringent washes were carried out in 2XSSC and 0.25-0.5% SDS in DEPC water.Stringent washing was done in 1XSSC and 0.5% SDS in DEPC water. Washing was carried out at 55-56oC for 20 minutes. After washing, the blot was covered in the saran-wrap and exposed to the phosphoimager film. After the desired time of exposure, the filmwas then scanned in phosphoimager and the picture saved.The densitometric analysis of the bands was carried out as described in the section 2.2.3.7.Normalization of the signal intensities in northern blotting experiments using probe against tRNA(U73)Arg5was done as follows. The intensity of the tRNA(U73)Arg5signalin the WT or the parent strain in the absence of IPTG was taken as 1 and the relative change in the other strain/growth condition calculated. The value thus obtained was corrected using the change in the corresponding 5S rRNA intensity relative to that in the WT/parent strain in the absence of IPTG

Washingof the membrane, exposure and scanning

For hybridisation,probe was heated at 95oC for 5 minutes and snap-chilled for 5 minutes and then added to the hybridisation bottles containing the blot. Hybridisation was carried out overnight at 50oC.The probes used and their radioactivity counts (in parentheses) were 5s RNA probe (2.5×106cpm), U73 probe (5×106cpm) and lacZ probes (106 cpm)

Hybridisation of the membrane

ii.10% Dextran Sulphateiv.0.5% SDSv.100 μg/mlSalmon Sperm DNAvi.DEPC water5ml of pre-hybridisation buffer was used per blotin 150×35mmhybridisation bottles(Labnet). Salmon sperm DNA was heated at 95oC for 5 minutes and snap-chilled for 5 minutes prior to adding to the rest of the mix. Blot was inserted into the bottle such that it stuck to the wallsand the surface containing the RNA faced the inner side of bottle. Pre-hybridisation was carried out at 50oC for 3 hours in hybridisation chamber(Labnet Problot 12S hybridisation oven)

The pre-hybridization buffer contained the following constituents:i.6X SSCii.5X Denhardt’s solution

Pre-hybridization of the membrane

The RNA was cross-linked onto the membrane after transfer by exposing it to the UV light of 200KJ/cm2 energy in a UV-crosslinker

UV-crosslinking of the RNA

Semi-dry transfer apparatus (Bio-Rad trans blot semi dry transfer cell)was used for the transfer of RNA from the gel to the membrane. The Hybond-N+ membrane from Amersham biosciences was used which was cut as per dimensions of the gel containing the RNA samples. For each transfer 6 pieces of Whatman3mmsheets of the size of the membrane were used. The membrane was soaked for 30-60 minutes in 0.5XTBE before transfer. The transferapparatus was set up as describedby the manufacturer. Transfer was done in 0.5XTBE buffer at 20V, 400mA and 100W for 1.15 hours

Transfer of RNA to the membrane

vii.RNA buffer II from Ambion(1-2X Xylene cyanol + Bromophenol blue)used for loading the samples. RNA isolation for Northern blotting for lacZtranscript was done aftergrowing cultures till A600of 0.6 in LB in the presence or absence of 1mM IPTG at 30oC while for lacZ-lacYʹ-tRNA(U73)Arg5or lacZʹ-tRNA(U73)Arg5transcripts, cultures were grown in LBupto A600of 0.3 and induced with 1mM IPTG for 30 min followed by RNA extraction.30ml of 10% polyacrylamide gels of 1.5mm thickness were cast in the Broviga slab vertical gel electrophoresis apparatus. Gels were polymerizedby the addition of TEMED and APS (1/100th volume of gel mix). The gel was pre-runat 300V for 15-20 minutes prior to loading.Sample preparation for gel loading was done as follows. The normalizedamounts of RNA samplesto be analyzed were mixed with the equal volumes of 2X gel loadingbuffer II(Ambion)making a final concentration of 1X. The samples were then heated at 80 degrees in a thermoblock (eppendorf) for 10 minutes and loaded on the gel when still warm. The gel was run at constant voltage of 300Vfor 3-4 hours till xylene cynol covered 2/3rddistance

The following solutions were used to cast and run denaturing PAGE gels:i.40% acrylamidestock solution ii.7.5M Ureaiii.5X TBEiv.Ammonium persulphate (APS) stock: 10% (w/v) solution made fresh v.TEMED (N,N,N′, N′-tetramethyl ethylene diamine) vi.Gel running buffer (0.5X TBE)

Denaturing polyacrylamide gel electrophoresis of RNA

The method followed was as described in(Lopezet al., 1997)with few modifications. The steps are as described

Northern Blotting

The semi-quantitative reverse transcription-PCR (RT-PCR) involves the synthesis ofcomplementary DNA (cDNA)from RNA. For this, 1μgof RNAwas treated with 1μl (1 unit) DNase I enzyme (Sigma, amplification grade) for20 min to remove DNA contamination. DNase I was inactivated by heating at 70oC for 10 min. Next, 5pmol reverse primer wasadded along with dNTPs and volume made to 10μlwith DEPC-treated water; the mix washeated at 65oC for 5 min and incubated on ice forat least 1 min. The reverse transcription reaction was set up with this mix using the Superscript III RT kit (Invitrogen) as per manufacturer’s protocolto obtain cDNA. The cDNA servedas the template for setting up a PCR for requirednumber of cycles. The samples were finally run on agarose gels

Reverse transcription(RT)-PCR

DNA fragments to be used for specific purposes like ligation or radioactive labellingwere eluted from the agarose gel after electrophoresis. The gel piece containing the desired band was sliced out from the gel and the DNA was purified using commercially available purification kit (Qiagen)for this purpose. The efficiency of elution was determined by checking a small aliquot of DNA sample on the gel

Purification of DNA by gel elution

Around 0.5-1μg DNA was regularly used for each restriction digestion. 2 to 5 units of restriction enzyme were used in the total reaction volume of 20μl containing 2μl of the corresponding buffer supplied at 10X concentration by the manufacturer. The reaction was incubated for 3hours at the temperaturerecommended by the manufacturer. The DNA fragments were visualized after electrophoresis on 0.8 to 1.5% agarose gels. Commercially available DNA size markers were run along with the digestion samples to compare with and to estimate the sizes of the restriction fragments

C. LBON temperature-sensitivityStrains were streaked on LBON agar plates and after an overnight incubation at42°C, growth was monitored (compared to that on LBON at 30°C as control). Absence of single colony growth was taken to reflect temperature sensitivity. D. In vivotranscription termination phenotypes The rationale for each phenotype is described in the relevant section. SMG-sensitivityThe E. coli relA mutants exhibit SMG-sensitive (SMGs) phenotype,that is,growth-inhibition in the presence of serine, methionine and glycine at 1mM concentration each(Uzan & Danchin, 1978)and is proposed to be a consequence of transcriptional polarity exerted by a frameshift mutation in the ilvG gene on the expression of downstream genes of the ilvGMEDA operon(Lopes & Lawther, 1989).This test was therefore used to distinguish relA+from relA−strains. Growth in the presence of amino acids serine, methionine, and glycine (SMG) was scored on glucose-minimal A plates supplemented with each of the amino acids at 40μg/ml and compared with the growth on non-supplemented glucose-minimal A plates to score for SMG phenotype. galEp3assayThis assay was used to test for relief of transcriptional polarity in the rho and nusG mutants. The galEp3 (galE490*) mutation represents a 1.3kb IS2 insertion in the gal leader region (between the promoter and structural genes of the galETKM operon). The mutation causes transcriptional polarity on the structural genes due to Rho-dependent transcription termination within IS2. In this assay, the gal operon expression in a galEp3 mutant or its derivatives was monitored by usingMacConkey galactose indicator plates (with 1% galactose), where Gal+colonies are red, and Gal−colonies are white. Therefore, the depth of color serves as an indicator of relative levels of gal expression, i.e., the extent of transcriptional polarity relief

Z broth (for P1 transduction) LB medium 100 ml 0.5 M CaCl20.5 ml Buffered LBagarTryptone 10.0 gYeast extract 5.0 gMin A salts1XBacto-agar15.0 gH2O to 1000 ml Buffered Yeast extract agarYeastExtract 5.0 gMin A salts 1X Bacto-agar15.0 gH2O to 1000 ml Yeast extract brothYeast Extract 5.0 g NaCl 10.0 g Bacto-agar15.0 g

A.lacZphenotype lacZ+colonies were distinguished from lacZ–colonies on X-gal containing plate or MacConkey lactose plate. X-gal is non-inducing colourless substrate of β-galactosidase enzyme which upon hydrolysis yields dark blue indolyl group and hence the lacZ+colonies on X-gal plate appear as dark blue colonies. Similarly, on the MacConkey agar plateslacZ+colonies appear dark pink whereas lacZ–colonies remain colourless. B. UV-sensitivityTo check the UV-sensitivity of the strains qualitatively, the strains were streaked on duplicate LB-agar plates and one of the plates was UV-irradiatedwith a 15-W UV-germicidal lamp at a distance of 70cm for 30 seconds. The UV-exposed and unexposed plates were incubated overnight in the dark after wrapping with aluminium foil and then growth was scored. This test could differentiate a recA–strain (UVs) from a recA+strain (UVr)

Scoring for Phenotypes

Z broth (for P1 transduction) LB medium 100 ml 0.5 M CaCl20.5 ml Buffered LBagarTryptone 10.0 gYeast extract 5.0 gMin A salts1XBacto-agar15.0 gH2O to 1000 ml Buffered Yeast extract agarYeastExtract 5.0 gMin A salts 1X Bacto-agar15.0 gH2O to 1000 ml Yeast extract brothYeast Extract 5.0 g NaCl 10.0 g Bacto-agar15.0 g

LB mediumTryptone 10.0 g Yeast Extract 5.0 g NaCl 10.0 g H2O to 1000 ml pH was adjusted to 7.0 –7.2 with 1 N NaOH.LB agar LB medium 1000 ml Bacto-agar 15.0g LB soft agar LB medium 100 ml Bacto-agar 0.6 g

H2O to 1000 ml LBON medium (LB medium without NaCl) Tryptone 10.0 g Yeast Extract 5.0g H2O to 1000 ml pH was adjusted to 7.0-7.2 with 1N NaOH. LBON agar LBON medium 1000 ml Bacto-agar 15.0gMacConkey Agar MacConkey agar (Difco) 51.5 g H2O to 1000 ml

LB mediumTryptone 10.0 g Yeast Extract 5.0 g NaCl 10.0 g H2O to 1000 ml pH was adjusted to 7.0 –7.2 with 1 N NaOH.LB agar LB medium 1000 ml Bacto-agar 15.0g LB soft agar LB medium 100 ml Bacto-agar 0.6 gZ broth (for P1 transduction) LB medium 100 ml 0.5 M CaCl20.5 ml Buffered LBagarTryptone 10.0 gYeast extract 5.0 gMin A salts1XBacto-agar15.0 gH2O to 1000 ml Buffered Yeast extract agarYeastExtract 5.0 gMin A salts 1X Bacto-agar15.0 gH2O to 1000 ml Yeast extract brothYeast Extract 5.0 g NaCl 10.0 g Bacto-agar15.0 g

All media and buffers were sterilized by autoclaving at 121ºC for 15 minutes. Media and buffers used in this study are given below: Glucose Minimal A medium Minimal A salts(1X)K2HPO410.5g KH2PO44.5g (NH4)2SO41.0g CH3COONa.2H2O 0.5g H20 to 1000 ml After autoclaving the following solutions were addedto Min A salts: MgSO4(1M)1 ml Glucose (20%) 10 ml Vitamin B1 (1%) 0.1 ml Amino acids when required were added to a final concentration of 40 μg/ml or casaminoacids were added at a concentration of 0.2% whenever needed.Minimal A agar It contains 1.5% bacto-agar (Difco) in Minimal A medium. The plates were poured after mixing double strength Minimal A with 3% agar.M9 minimal medium(1X)Na2HPO4•7H2O7.0 gKH2PO43.0 gNaCl0.5gNH4Cl1.0 gH20to 1000 mlSterilize the solution by autoclaving.Glucose-M9 minimal medium was madein asimilarwayto that of Glucose Minimal A medium

Media

ZFIN_ZDB-GENO-101028-4

ZFIN_ZDB-GENO-100308-4

ZFIN_ZDB-GENO-100308-4

ZFIN_ZDB-ALT-051123-4

ZFIN_ZDB-GENO-130815-4

ZFIN_ZDB-ALT-131107-4

ZFIN_ZDB-GENO-071217-4

ZFIN_ZDB-GENO-121109-4

ZFIN: ZDB-ALT-160921-4

RRID:ZFIN_ZDB-GENO-110511-4

Starbucks to Stop Using Disposable Plastic Straws by 2020

This sectional combination for the submersion of the Constitution, has been aided in some of the States by elevating to citizenship, persons who, by the supreme law of the land, are incapable of becoming citizens; and their votes have been used to inaugurate a new policy, hostile to the South, and destructive of its beliefs and safety.

they have denounced as sinful the institution of slavery; they have permitted open establishment among them of societies, whose avowed object is to disturb the peace and to eloign the property of the citizens of other States.

If there is a recent date in the very title of the video, and that particular video has been uploaded to YouTube multiple times over a short span of time, then there is high probability that the video is a fake

The Service Card for the Stuttgart Services project is the first electronic ticket for e-mobility in and around Stuttgart. In the initial phase of the project, subscribers have been able since 2015 to use the Service Card as an electronic ticket. Marketed under the polygo brand, the project was funded by the German Federal Ministry for Economic Affairs and Energy until June 2016.As one of 40 projects included in Baden-Württemberg’s “LivingLab BWe mobil” e-mobility showcase, the Stuttgart Services project seeks to make access to e-mobility services as seamless as possible for customers traveling in the Stuttgart region, and to supplement them with further citywide offers. The Service Card will not only open up the city’s e-mobility potential; it will also integrate everyday aspects of urban life by serving as a library card, swimming-pool membership card, and payment card.

Stadtinfo Köln (City Info Cologne) is a research project financed by the German Federal Ministry of Research that centres around the collection of various traffic data to be distributed to diverse platforms including the Internet, portable devices such as PDAs and mobile telephones, in-car navigation systems and variable message signs throughout the city. The project was implemented over a four-year period from 1998 to October 2002 by 15 partners in co-operation with the city of Cologne at a cost of €16.1 million.

As part of the joint project "Innovation Network Morgenstadt: City Insights" under the project management of the Fraunhofer-Gesellschaft for the Promotion of Applied Research eV, the ESRI (Environmental Systems Research Institute) is developing a three-dimensional visualization of the district of Mülheim in cooperation with the City of Cologne. For this purpose, the city of Cologne provides data from the areas of environment, traffic, real estate, urban planning. From this three-dimensional geoinformation system (so-called 3-D GIS model), an app is being developed, which is expected to be available to the people of Cologne in the second quarter of 2015 on the homepage of the city of Cologne.

The Cologne-based TÜV Rheinland headquarters is revitalizing its approximately 100,000 square meter business park with ten buildings in Poll. The management of TÜV Rheinland Immobiliengesellschaft mbH & Co. KG has developed an innovative concept with the engineering experts from Drees & Sommer as energy designer, building physicist and TGA planner: In future, there should only be one energy center. All buildings in the property are supplied with heat and cooling via the power grid of the new energy center. For heat supply, hybrid energy sources are used. These consist of the renewable raw material wood, a wood pellet boiler plant, as well as the fossil energy natural gas, gas condensing boilers and an integrated combined heat and power plant. The cold is generated by free-cooling, high-efficiency compression machines and absorption chillers. This can save 30 percent of primary energy compared to today. In addition, CO2 emissions will be reduced by more than 30 percent. The overall concept is modular in design and adaptable for the future.

evohaus innovative settlements in general evohaus irq (Intelligent Residence Quartiere) Settlements cover your heat demand primarily environmentally friendly and cost-effective by the sun. The need for heating is already low due to the good insulation of the evohaus architecture anyway. Remaining heat demand is covered by solar power. The solar power drives heat pumps that produce about three kilowatt hours of heat energy for heating or hot water with one kilowatt hour of electrical energy. The settlement gets its heat independent of gas, coal or other fossil fuels. The heat pumps are preferably switched on when enough solar power is generated. Water tanks store excess heat and provide the settlement with sunless times. An energy management system monitors and controls storage tanks and heat pumps. The evohaus irq concept is taking the step from a passive house to an active house: it not only saves energy but also generates electricity itself and uses it with intelligence.

Electric cars are an energy-efficient and potentially regenerative alternative to cars powered by fossil fuels. In order to promote this regenerative alternative, colognE-mobil has already installed 122 charging stations for electric cars (TankE) in and around Cologne, one of which is located on the Klimastraße in the car park behind the Kaufhof. Further charging points will soon be created directly on the Klimastraße.

As well as energy-saving lighting, Smart Home is an important building block for an energy-efficient and comfortable future. With smart homes and smart meters in the network, homeowners and store owners can reduce their electricity and heating costs by an average of 7%! Add to that the great comfort of making the apartment burglar-proof and controlling almost every aspect of heating, electricity or security in the building. So you can control from your smartphone whether the stove is still on at home, a window has been left open, the heating is running at full speed or the light is on. In addition, before the house is on fire, modern, networked smoke detectors report any alarm directly to the owner's smartphone. It can automatically be initiated various steps, such. B. that the fire department is called. In order to test some scenarios and saving opportunities in everyday life and to make known the possibilities offered by these modern technologies, Smart Home applications were installed on the Klimastraße in nine private apartments of the Nippes Tower and in the bookstore Neusser Straße. This was financed by the project Klimastraße or the company RocketHome . In addition, it is planned to equip the entire climate road with smart meters from RheinEnergie.

The Cologne-based company Coptr Warn- und Schutzsysteme GmbH has been developing and producing innovative, precise, acoustically-optically smart on-site warning systems for several years.   Whether thunderstorms, hurricanes, extreme heat or pollutants in the air, the warning systems automatically warn and alert people in the open air to get to safety from lightning strikes and other high-threshold, potentially life-threatening weather and environmental hazards.

The HOOU is a cross-university project, which is supported by the network of the six state-owned Hamburg universities * with the UKE, the Department of Science, Research and Equality, the Senate Chancellery and the Multimedia Kontor Hamburg (MMKH).

District heating is one of the key pillars of our sustainable energy action plan. This plan has been decided by the local parliament in 2008 and renewed in 2015. Our first priority is to cut in half the total energy demand of the city until 2050 and then cover the rest with renewable energy and/or waste heat. To use large amounts of waste heat (e.g. from a waste incineration plant, industry, datacentres …) you need a distribution system, because it is not useable only locally. This is why we want to increase the share of district heating in the city. For the future we see a district heating system which will be “open source technology” – everyone can use the heat and also be a prosumer, delivering surplus energy, e.g. from a solar – thermal plant, to the system. There will not be any longer central DH-Stations but smaller plants and the use of all waste heat sources we can get.

Knowledge transfer at all levels Tutech combines science, business and society We know what is important in technology and knowledge transfer at the interface between university and industry. We speak both languages ​​- those of science and those of companies - and have been successfully combining entrepreneurial and scientific potential for 25 years. Our mission and goal is to create sustainable value through the application of new research results and inventions, and we do so by acting as a consultant, broker, initiator and coordinator at national and international levels. Tutech is a privately organized subsidiary of the Technical University of Hamburg and the Free and Hanseatic City of Hamburg. Together with our sister company Hamburg Innovation , we connect all public law schools of the city as well as numerous research institutions of the Hamburg Metropolitan Region.

As a subsidiary of the  Hamburg Investment and Development Bank  , we support innovative business start-ups and young, innovative companies in Hamburg in order to strengthen the startup scene in Hamburg and to contribute to the development of promising companies. For this purpose, we have two ideal with InnoRampUp and the Innovation Starter Fund Hamburg

We turn ideas into enterprises Hanse Ventures is the company builder in Hamburg. We develop our own internet and mobile business concepts, and implement these together with suitable founder teams.

Solo self-employed persons are understood to be persons who carry out an independent activity on their own, ie without salaried employees. In the creative industry, there is an above-average proportion of solo self-employed compared to other sectors of the economy. People who offer creative services or products without being hired are faced with particular challenges in practice because they have to deal intensively and permanently with questions of their own positioning, customer acquisition, marketing, target groups, etc. Many of our offerings are tailored to the needs of solo freelancers in the creative industry. 

Open Data Hamburg The data previously published under the Open Data Portal can now be found here in the Transparency Portal.

In the eCulture Cloud, the digital cultural content of Hamburg will be stored in bundled form in the future. Among other things, this cloud offers the possibility of making (private) collections, libraries, image and video archives accessible to the public, even if they can not find a place in exhibitions of the institutions. The particular attractiveness of this project lies in the diversity of the collection contents. Because these are not only composed of historical documents, but also give deep insights into modern phenomena, such. B. in pop culture. In addition, it is not uncommon for creators themselves to start collecting collections or archives according to their personal needs