Xanthomonasand E.colicolony PCR

and finally resuspended in 100 μl sterile water. Bacterial cell suspension was aliquoted in 20 μl volume. The above procedure was followed for all the three strains and cell suspension of three different strains were mixed together in 1:1:1 ratio. For conjugation to occur, 20 μl of the above mixture was spottedon the LB agar plate and incubated at 37°C for 12-16 h. Next, the conjugation drops were streaked on LB agar plate containing appropriate antibiotics to select the S17-1 recipient containing recombinant plasmid.S17-1 was directly conjugated with Xanthomonasstrain. S17-1 strain containing recombinant plasmid (3 ml) and recipient Xanthomonasstrain (100 ml) was grown overnight with appropriate antibiotics. Cells were harvested and washed thrice as mentioned earlier. Xanthomonasstrain was finally dissolvedin 600-700 μl sterile water and S17-1 strain was dissolved in 3 ml sterile water. 50 μl Xanthomonascell suspension and 10 μl S17-1 cell suspension were mixed together and 20 μl was spotted on PS agar plate. After 40 h of incubation at 28°C, each conjugation drop was dissolved in 400 μl water separately and plated on PS agar medium with rifampicin (counter-selectable marker) and plasmid specific antibiotics for specific selection of Xanthomonascolony with recombinant plasmid

Since compatible conjugation does not exist between Xanthomonasand E.coliDH5α strain.Therefore, upon getting the appropriate clones in DH5α, conjugation was performed with S17-1 (recipient strain) and PRK600 (helper strain). All the three strains (DH5α with clone, S17-1 and PRK600 strain of E.coli) were grown overnight at 37°C with constant shaking at 200 rpm in 3 ml LB broth. Cells from 1 ml overnight grown cultures were harvested by centrifugation followed by three washes with s

Xanthomonas conjugation

shaking at 200 rpm. 1% of overnight grown culture was inoculated in 100 ml fresh PS medium and grown to obtain log-phase culture. Log phase Xanthomonas culture was kept on ice for 10-15 min, aliquoted in 50 ml pre-chilled centrifuge tubes and centrifuged at 4000-5000 g at 4°C for 10 min. Supernatant was discarded and pellet from each tube was gently resuspended in 10-20 ml sterile chilled water. Next, cells were harvested by centrifugation at 4000 g at 4°C for 10 min and supernatant was discarded. Harvested cells were washed twice and finally resuspended in adequate amount of prechilled sterile water. 100 μl of cell suspension was aliquoted in sterile 1.5 ml microcentrifuge tubes and kept on ice. For transformation, Xanthomonaselectrocompetent cells and appropriate amount of plasmid DNA was mixed, and kept on ice in laminar hood. This mixture was added to 1 mm electroporation cuvettes (Biorad) and tapped gently to allow the cells to settle properly in order to avoid air bubbles. Competent cells were electroporated (1800 V, 25 μF, 200 Ω, 1mm cuvette) followed by immediate addition of fresh PS broth in the cuvette, mixed properly and taken in the microcentrifuge tubes. Microcentrifuge tubes containing transformed cells were incubated at 28°C for 2 hours with continuous shaking for recovery. After recovery, cells were plated on specific medium with appropriate antibiotics and incubated in 28°C plate incubator

For electrocompetent cell preparation, single colony of desired Xanthomonasstrain was inoculated in 5 ml PS medium and grown overnight at 28°C

Xanthomonastransformation

E.coliDH5α strain was transformed with plasmids carrying appropriate inserts to generate clones, and Xanthomonas deletion strains. Ultracompetent cells stored at -80°C were thawed on ice for 5-10 min. 5 μl ligated plasmid was added to 100 μl ultracompetent cells and incubated on ice for 30 min. Next, competent cells were subjected to heat shock at 42°C for 90 seconds. Cells were immediately transferred on ice for 2-3 min. Next, 1 ml LB medium was added and cells were allowed to recover for 1 h on a shaker incubator set at 37°C. After the recovery, cells were centrifuged at 3000 g for 3 min. Medium supernatant was discarded and cells were resuspended in 100 μl fresh sterile medium. Cells were plated on LB agar containing appropriate antibiotics. Plates were incubated at 37°C for 12-16 h

E.colitransformation

A single colony of E.coliDH5α strain was inoculated in 5 ml LB medium and incubated at 37°C for overnight. 1% of overnight grown culture was inoculated in 500 mlfresh LB medium and incubated at 37°C for 2-3 h till the OD600 reached to 0.4-0.5. Culture was chilled on ice for 5 min followed by centrifugation at 3000 g for 15 min at 4°C. Harvested cells were washed gently with 200 ml ice-cold TFb-I buffer. Cells were collected by centrifugation at 3000 g for 5 min at 4°C and gently resuspended in 20 ml ice-cold TFb-II buffer. Bacterial cell suspension was kept on ice for 15 min and was aliquoted in 100 μl volumes in chilled sterile microcentrifuge tubes. Cells were immediately snap-frozen in liquid nitrogen and stored at -80°C

Preparation of E.coliultracompetent cells

Xanthomonas strains were grown in PS medium for 14-16 h at 28°C with continuous shaking at 200 rpm. 1 ml of bacterial cultures were ten-fold serially diluted in water and 100 μl volume of each dilution was plated on PS agar plates to get the colony forming units (CFUs). Similarly, 5 μl volume of each dilution was spotted on PS agar plates containing different concentration of streptonigrin and different detergents for intracellular iron and membrane sensitivity assay, respectively. Plates were incubated at 28°C and images were captured after 2-8 days of incubation depending upon m

Serial dilution plating and spotting assay

For growth analysis of Xanthomonasstrains, a loopful of bacterial colony was inoculated in appropriate broth medium and grown for 14-16 h. 0.2% of overnight grown culture was used to inoculate the test medium (for iron limitation, PS with 50 or 100 μM of 2,2’-dipyridyl, and for iron supplementation, different concentrations of either FeCl3or FeSO4was added). Cultures were transferred to a shaker incubator set at 28°C and 200 rpm. Absorbance of cultures was measured using Ultraspec 2100 pro UV/visible spectrophotometer (Amersham Biosciences)at 600 nm at regular time-intervals till 48 h. Absorbance values were plotted with respect to time and generation time was determined from the logarithmic (log) phase of bacterial growth using the following formula.G = Generation time (h)T1= Initial time point taken for analysisT2= Final time point taken for analysisNf = Absorbance at time T2(Final OD)Ni= Absorbance at time T1(Initial OD)

Growth analysis and determination of generation time

Xanthomonasstrains were routinely grown in rich PS medium, at 28°C with continuous shaking at 200 rpm unless otherwise stated (New Brunswick Scientific, Innova 43, U.S.A.). In general, Xanthomonas frozen glycerol stocks were revived on PSA medium by streaking,and allowed to grow for 3-4 days. To prepare liquid culture, a loopful of each Xanthomonasstrain was inoculated in PS medium and grown for 24-30 h. Xanthomonasstrains on plates were stored at 4°C for a maximum period of 1 week. For growth of X. oryzaepv. oryzaein Minimal (MM9); (Kelemu and Leach, 1990)and XOM2 media (minimal media which induces hrp genes in X. oryzaepv. oryzae),(Tsuge et al., 2002), first the strains were grown in PS medium to a cell density of 109cells/ml and then centrifuged at 5000 g to concentrate the cells and washed twice with sterile water to remove media components sticking to the cells. Washed cells were inoculated in MM9 and XOM2 medium and grown for overnight.Escherichia coliDH5α,used for cloning purposes, was revived on LB medium containing nalidixic acid and grown at 37°C with continuous shaking at 200 rpm. LB medium was supplemented with appropriate antibiotics to grow the bacterial strains carrying plasmids. For plasmid purification, bacterial strains were grown overnight in LB broth medium containing suitable antibiotics.Antibiotics were used at a final concentration of 50 μg/ml rifampicin, kanamycin, streptomycin and trimethoprim; 100 μg/ml ampicillin; 25 μg/ml nalidixic acid; 10 μg/ml cephalexin, chloramphenicol and gentamicin; 20 μg/ml cyclohexamide and 5 μg/ml tetracyclin

Strains and culture conditions

Microbiological methods

Overnight-grown C. glabratacells were freshly inoculated either in YNBmedium or YNBmedium supplemented with BPS (50 μM) or FeCl3(500 μM) and allowed to grow for 4 h at 30°C, 200 rpm. After 4 h growth, cells were spun down at 4,000 rpm for 5 min in a refrigeratedcentrifuge set at 4°C and total protein was isolated. For estimation of histone deacetylase (HDAC) activity, 40 μg of protein samples were taken and HDAC Fluorometric Activity Assay Kit (#10011563; Cayman Chemical Company, Ann Arbor, MI, USA) was used as per manufacturer’s instructions. Fluorescence intensity values obtained inthepresence of the HDAC inhibitor, trichostatin A, were subtracted from those of the samples without inhibitorand plotted as relative arbitrary fluorescence units

Estimation of histone deacetylase (HDAC) activity

spectro-photometrically at 340 nm. For wild-type cells,mitochondrial aconitae activity was normalized to 100 % and for mutants the relative aconitase activity percentages were calculated

To determine aconitase activity, mitochondria were isolated as described by Meisinger et al. Briefly, YPD-grown C. glabratacells (500 OD600) were subjected to spheroplasting followed by homogenization (15 strokes) with glass Teflon homogenizer. To collect mitochondria, homogenate was centrifuged at 13200 g for 20 min in a refrigerated centrifuge set at 4°C. The mitochondrial pellet was resuspended in SEM buffer (250 mM sucrose, 1 mM EDTA, 10 mM Mops-KOH, pH 7.2) and stored at -80°C until further use. Mitochondrial aconitase activity was estimated by using method as described by Bulteau et al. Mitochondrial protein samples (5 μg) were prepared in KH2PO4buffer (25 mM, pH 7.2) containing 0.05 % Triton X-100. The samples were incubated with sodium citrate (1 mM), MnCl2(0.6 mM), NADP (0.2 mM) and isocitrate dehydrogenase (1 U/ml) for 20 min at room temperature. Isocitrate dehydrogenase catalysed reduction of NADP was recorded

Measurement of aconitase activity

For quantification of intracellular iron content, BPS-based colorimetric method as described by Tamarit et al.,was used. Briefly, overnight grown C. glabratacells were inoculated in fresh YPDmedium and allowed to grow at 30°Cand200 rpm for 6 h. Cultures were spun down and 50 OD600cells were subjected to nitric acid digestion (500 μl, 3%) for 16 h at 96°C.Next, lysates were spun down at 13,000 rpm to remove the cell debrisand 400 μl of the lysatewas incubated with 126 μl of ammonium acetate (1 M), 320 μl of BPS (1.7 mg/ml) and 160 μl of sodium ascorbate (38 mg/ml)for 5 min at room temperature. Absorbance of the samples was takenagainst the reagent blank at 535 nm and 680 nm which correspond to BPS-Fe-specific and BPS-Fe-non-specific absorbance, respectively. Non-specific absorbance was subtracted from specific absorbance and the iron content in each sample was calculated from the standard curve prepared using FeCl3and expressed as μM per OD600cells. In each experiment performed, total iron content of wild-typecellswas normalized to 100% and the iron content of mutants were calculated with respect tothe iron content of wild-type cells

Estimation of total iron

Radioactive counts measured in2x106labelled C. glabratacells and lysates were considered as ‘input’ and ‘output’ values, respectively. Percentage adherence was calculated by following equation.%Adherence=Output radioactive countsInput radioactive countsX 100

Adherence of C. glabratacells to Lec2, Chinese hamster ovarian (CHO) cells, wasdetermined as described previously (Cormack et al., 1999). Briefly, Lec2 cells were seeded at a cell density of 5x105cells per wellin a 24-well tissue culture plate.Cells were incubated in a cell culture incubator (Thermo Scientific) set at 37°C and 5%CO2for 12 h. Post incubation, the medium was discarded in a reservoir and Lec2 monolayer was washed thrice with sterile 1X PBS without disturbing the monolayer. Lec2 cells were fixed with 3.7% para-formaldehyde for15 min followed by twoPBS washes. 1 mlof 1X PBS containing antibiotics, penicillin (100 units/ml) and streptomycin (100 μg/ml), was added to each well, plates were sealed with PARAFILM, Cole-Parmer(PM-996) and stored at 4°C until use.C. glabrata cells,to be tested for their adherence potential, were grown in CAAmedium for 24 h.100 μl of 24 h-grownculture was re-inoculated in fresh 5 ml CAAmedium containing 200 μCi of S35(Met:Cys-65:25) INVIVO PROTWIN label mix (JONAKI, India)in a 15 ml polypropylene tube.Cultures were allowed to grow for 16-20 h at 30°C with shakingat200 rpm to radiolabel the cells. Radiolabelled C. glabratacells were harvested by spinning down1 ml of labelled yeast cultures,andthe cell pellet was washed thrice with sterile 1X PBS to remove any residual S35(Met:Cys-65:25) labelling mix from the medium. Post washes, the pellet was resuspended in 1 ml PBS, OD600was measured andcell suspension of 0.4 OD600wasprepared.Next, 24well plates containing fixed Lec2 cells were taken out from 4°C and PBS from the wells wasdiscarded by inverting the plates. Wells were washed once with PBS and 2x106labelled yeast cells were added to eachwell, andincubatedfor 30 min at room temperature.Post incubation, plates were centrifuged at 1,000 rpm and the wells were washed thrice with 1X PBS to remove non-adherent C. glabratacells. Lec2 cells were lysed with 5% SDS in PBS by scraping the wells, lysates were collected and transferred to a vial containing scintillation fluid

Adherence assay

For mouse infection assay, 10 ml YPD medium was inoculated with different C. glabratastrains and allowed to grow at 30°C for 12-16 h. After growth,cultures were washed twice in sterile 1X PBS and the cell pellet was resuspended in appropriate volume of 1X PBSto obtain a cell density corresponding to20OD600. 100 μlcell suspension(4x107yeast cells)was injected into female BALB/c mice (6-8 weeks old) through tailvein. Seven days post

infection, mice were sacrificed and kidneys, liver, brain and spleen were harvested. Organs were homogenised in 1 ml PBS and appropriate dilutions of tissue homogenate were plated onYPD-agar mediumsupplemented with penicillin and streptomycin antibiotics (100 units/ml penicillin and 100 μg/ml streptomycin). Plates were incubated at 30°C for 24-48 h and CFUs were counted. Fungal burden in different organs wasdetermined by multiplying the CFUsobtainedwithanappropriate dilution factor

For mouse infection assay, 10 ml YPD medium was inoculated with different C. glabratastrains and allowed to grow at 30°C for 12-16 h. After growth,cultures were washed twice in sterile 1X PBS and the cell pellet was resuspended in appropriate volume of 1X PBSto obtain a cell density corresponding to20OD600. 100 μlcell suspension(4x107yeast cells)was injected into female BALB/c mice (6-8 weeks old) through tailvein. Seven days post

Mouse infection assay

Experiments involving mice were performed at the CDFD animal facility, VIMTA Labs Ltd., Hyderabad, India(www.vimta.com) in strict accordance with the guidelines of the Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA), Government of India. The protocol was approved by Institutional Animal Ethics Committee (IAEC) of the Vimta Labs Ltd. (IAEC protocol approval number: PCD/CDFD/05). Procedures used in this protocol were designed to minimize animal suffering

Ethics statement

Other methods

using the GENESPRING GX (Version 12.0) software,normalized to 75 percentile shift and represent the average of two hybridizations from biological replicates for each sample. Functional annotation of differentially regulated gene set(≥1.5 Fold change with p≤0.05)was performed using the GENESPRING GX (Version 12.0) softwareand GO terms with p<0.05 were considered as statistically significant. Using the REVIGO tool(http://revigo.irb.hr), redundant and significantly overlapping GO terms were removed and summarized. In REVIGO analysis, S. cerevisiaedatabase was chosen for GOterm sizes andtheallowed similarity value was set to 0.5(small).Additionally, to identify the overlap among differentially expressed genes, functional category analysis was performed usingthefungal specific annotation tool FUNGIFUN (https://sbi.hki-jena.de/FungiFun/FungiFun.cgi). Significantly enriched FunCat (Functional Catalogue) associated pathways were extracted usingthewhole C. glabratagenome as background and compared across differentially regulated gene sets. The parameters used for FUNGIFUN analysis were cut-off p=0.05; Fisher’s exact test; FunCatlevel 3. Raw data sets for this study are available attheGene Expression Omnibus database (http://www.ncbi.nlm. nih.gov/geo; accession no. GSE60741

Log-phase C. glabratacells were grown either in YNB or YNB medium supplemented witheither50 μMBPS(iron limiting) or 500 μMferric chloride (iron excess) for 2 h. Cells were spun down at 4,000 rpm for 5 min and washed twice with ice-cold DEPC-treated water. Total RNA was extracted usingtheacid phenolisolationmethod, resuspended in nuclease-free water and stored at -80°C. The frozen RNA samples were sent to Genotypic Technology Ltd., Bangalore (http://www.genotypic.co.in) wherein quality of RNA samples wasdetermined by examining the RNA integrity number (RIN) before performing microarray analysis. Next, the 8x15 GE Agilent array,comprised of 60mer oligonucleotides representing a total of 5,503 C. glabrataORFs (three replicates of each probe on average),was used for single colour microarray experiments.Datawereextracted

Microarray analysis

To perform immunoblotting or western blotting, appropriate amounts of total protein(ranging from 20-40 μg) were separated ona SDS-PAGE gel of 12%acrylamide concentration in Tris-Glycine-SDS gel running buffer. Protein separation was done at 70-100 V for 2-3 h using a MINI PROTEAN®3 electrophoresis unit (Bio-Rad). Followingseparation, proteins weretransferredto polyvinylidene difluoride (PVDF) membrane, using a Bio-Rad Mini Trans-Blot electrophoretic transfer unit in Tris-Glycine transfer buffer at 4⁰C. Before setting transfer assembly, PVDF membrane was first activated in 100% methanolfollowedby washesin the transfer buffer. The transfer assembly was set inaBio-Rad Mini gel holder cassette (170-3931)according to manufacturer’s instructions. The transfer time and current settings varied depending on the size oftheprotein of interest. Post transfer, membranes wereseparated from the assembly and kept for blocking intheblocking buffer (0.1 % Tween-20, 5% w/v fat-free skimmed milk in 1X TBS) for 1 h at room temperature with shaking. Next,membranes wereincubated with appropriate dilutions of primary antibodiesin the blocking buffereitherfor 3-4 h at room temperature or overnight at 4°C with gentle shaking. Post incubation,membranes were washed thrice with 1X TBS-T, 10 min each,with constant agitation. After washes, membraneswere incubated with appropriate dilutions of secondary antibodiesconjugated with horseradish peroxidase (HRP) for 1 h at room temperature with gentle shaking. Next, membranes were washed thrice with 1X TBS-T, 10 min each,with constant agitation. To visualize proteins, membranes were removed from TBS-T, and theHRP substrate ECL plus (Amersham Biosciences, RPN2232) was uniformly added on top of the membrane. Chemiluminescent signalswere captured in the western blot imaging system (FluorChemTME system)

For protein extraction, cells were spun down at 4,000 rpm for 5 min and washed with ice-cold water. The cell pellet was resuspended in 250-500 μl of homogenisation buffer which contained50 mM Tris (pH 7.5), 2 mM EDTA, 1 mM phenylmethylsulphonyl fluoride (PMSF) (serine protease inhibitor), 10 mM sodium fluoride (serine/threonine and acid phosphatases inhibitor), 1 mM sodium orthovanadate (Tyrosine and alakaline phosphatases inhibitor) and 1X protease inhibitor cocktail (Sigma, P 8215). The cell suspensison was transferred to a 1.5 ml centrifuge tube and equal amounts of glass beads (0.5 mm size) were added. Cells were lysed mechanically by bead-beatinghomogenizer (MP Biomedicals, FastPrep®-24) atthemaximum speed for 60 seconds, five times each,with intermittent cooling on ice.After lysis, tubes were punctured at the bottom with the helpofasurgical needle, and the lysed cell suspension was collected in a fresh microcentrifuge tubes by putting the punctured tubes on top of the fresh tubes and centrifuging them at 3,000 rpm for 10 min. The supernatant was transferred toafresh microcentrifugetubeandprotein concentrationwasestimated usingtheBCA protein assay kit (Thermo scientific). Protein preparations werestored at -20°C until use

Total protein extraction and immunoblotting

For complementation studies, C. glabrataORFs, CgFTR1(1.22 kb), CgFET3(1.91 kb), CgYFH1(0.53 kb), CgCCW14(0.64 kb), CgMAM3(1.91 kb)andCgHOG1(1.34 kb) were PCR amplified from wild-type genomic DNA using Phusion high-fidelity DNA polymerase and cloned down-stream of the PGK1promoter intothe XmaIand XhoI, XbaIand XmaI, XmaIand XhoI, BamHIand SalI, XmaIand XhoI, and BamHIand XmaIsites, respectively, in the CEN-ARS containing plasmid pGRB2.2 (pRK74). For over-expression studies, C. glabrataORFs, CgCCC1(0.95 kb), CgYAP5(1.05 kb)andCgMRS4(0.92 kb) were PCR amplified from wild-type genomic DNA using Phusion high-fidelity DNA polymerase and cloned down-stream of the constitutive promoter PDC1into the BamHI and SalI, XbaIand XmaI, and XmaI and XhoIsites, respectively, in the CEN-ARS containing plasmid obtained from Addgene (Addgene-ID 45323). All clones were verified by PCR and sequencing analysis

Cloning of C. glabrataORFs

PCR-positive transformants were inoculated in 10 ml YPD medium, allowedto grow for 12 handgenomic DNAwas isolated.Another round of PCR was performed using genomic DNA asatemplate toconfirm the gene deletion

A homologous recombination-based strategy was used to disrupt C. glabraraORFs witha cassette containing the nat1gene, which codes for nourseothricin acetyltransferase and imparts resistance to nourseothricin. Briefly, 5’-and 3’-UTR region (nearly 500-700 bp) of the gene to be deleted were amplified by PCR using wild-type genomic DNA as template. Both 5’-and 3’-UTR amplified products were fused to one half each ofthenat1gene amplified from theplasmid(pRK625). The two nat1-amplified fragments share about 300-350 bp complimentary region. To obtain fusion products, primers were designed insucha way thatthereverse primer for 5’-UTR and the forward primer for 3’-UTRof the gene of interestshare 20 bp complimentary region with the forwardprimer for 5’nat1fragment andthereverse primer for 3’nat1fragment amplification, respectively. The fused PCR products were co-transformed in to the wild-type strain and transformants were plated on YPD-agar plates. Plates were incubated at 30°C for 16 h to allow the homologous recombination between nat1fragments,and 5’-and 3’-UTR atthegenomic loci. Post incubation,cells were replica plated ontoYPD-agar plate supplemented with 200 μg/ml nourseothricin and incubated for another 24 h. Nourseothricin-resistant colonies were purified and verified for gene disruption viahomologous recombination by PCR using appropriate set of primers

Generation of C. glabratadeletion strains

For Yeast colony PCR, yeast cells were subjected to zymolyase (MP Biomedicals, 0832092) digestion to obtain thespheroplast. To perform zymolyase digestion, a digestion cocktail was prepared in 1XPBS consisting of zymolyase (2.5mg/ml) and sorbitol (1.2 M). The cocktail was dispensed in 0.2ml PCR tubes in 10 μl aliquots anda tip-full of yeast cells wasadded to these tubes. Tubes were incubated at 37°C for 2-3 h and 1 μl of digested mixture was used as a template in a PCR reaction

Yeast colony PCR

To perform restriction digestion of plasmid DNA and PCR-amplified DNA products, restriction enzymes were procured from NEW ENGLAND Biolabs(NEB). Restriction digestion was set in 50 μl reaction volume with appropriate buffer and 1X BSA. For ligation of DNA fragments obtained after restriction digestion, T4 DNA Ligase enzyme (NEB, M0202M) was used. All ligation reactions were set in 20 μl reaction volume containing 1X ligase buffer, 3-10 units of DNA ligase enzyme and vector to insert molar ratio of 1:3. The ligation mixture waseitherincubated at 16°C for 16h or at room temperature for 2-3 h. Post incubation, ligation reaction was inhibited by heatingtubes at 65°C for 15-20 min.2-5 μl of ligation mixture was used to transform ultra-competent E. coliDH5αcells

Restriction digestion and ligation

To extract DNA from agarose gels,the QIAquick® gel extraction kit (QIAGEN, 28706) was used. For purification of PCR amplified DNA products,the QIAquick® PCR purification kit (QIAGEN, 28106) was used. Clean-up of enzymatic reactions was performedusing the MinElute® Reaction Cleanup kit (QIAGEN, 28204). Allprotocolswere followed as per manufacturer’s instruction

Gel extraction, PCR purification and Reaction clean-up

Bacterial plasmid DNA was isolatedusing the QIAprep® spin Miniprep kit (QIAGEN, 27106). 10 ml of LB medium supplemented with appropriate antibioticswas inoculated withasingle bacterial colony and incubated at 37°C for 12-16 h. Cultures were spun down at 8,000 rpm for 5 min, supernatant was discarded and the cell pellet was processed to isolate plasmid DNA as per instructions given in the kit. DNA was eluted either in nuclease-free water or in elution buffer provided in the kit and stored at -20°C until use

Plasmid isolation

were chosen for qPCR. For all qPCR reactions,0.4 μl of cDNA template was used in a 20 μl reaction volume. Reactionswere performed anddata wereanalysed in ABI7500 real-time qPCR machine. Amplified products were run on 2% agarose gel to confirm amplification ofthecorrect size product. CTvalues of respective products were normalized with corresponding CTvalue of the housekeeping gene CgACT1. Relative change in expression was determined by comparative CTmethod,also referred as 2-∆∆CTmethod, utilizing following equation.Fold change upon treatment=2-∆∆CT∆∆CT=∆CT Treated-∆CT Untreated∆CTTreated= CTvalue for gene of interest upon treatment-CTvalue of internal control (CgACT1)upon treatment∆CTUntreated= CTvalue for gene of interest without treatment-CTvalue of internal control (CgACT1)without treatmentThe reaction cycling conditions were as follows1)95°C for 10 min (initial activation)2)95°C for 15 sec (denaturation)3)55°C for 30 sec (annealing)4)72°C for40 sec (extension)5)Go to step 2 (40 cycles)6)72°C for 10 min (final extension)

MESA GREEN qPCR mastermix (RT-SY2X-03+WOULR) supplied by Eurogentech was used in all qPCR experiments. Primers for real-time qPCR experiments were designed by using the Primer3 plus software to obtain 120-200 bp amplification products. Standardization of optimaltemplate and primer concentrationconditionswas done in a PCR reaction and concentrations resulting in good amplification withoutprimer dimers

Quantitative Real-time PCR(qPCR)

Reverse transcriptase “Superscript III” (Invitrogen, 18080-051) was used to perform cDNA synthesis. Briefly, 500 ng of DNase I-digested RNA was incubated with 1 μl of 10 mM dNTP and 50 μM oligo(dT) at 65°C for 5 min in a 10 μl reaction mixture followed by cooling on ice for 5 min. Post incubation, 10 μl of cDNA synthesis mixture was added which contained 2 μl of 10XRT buffer, 4 μl of 25 mM MgCl2, 2 μl of 0.1 M DTT, 1 μl of RNase out (40 units) and 1μl of Superscript III (200 units). Tubes were incubated at 50°C for 1 h and thereaction was terminated at 85°C for 5 min. The quality of synthesized cDNA was checked by using it as a template in a PCR reaction to amplify the housekeeping gene CgACT1. Amplification of CgACT1was indicative of proper cDNA synthesis

Complementary DNA (cDNA) synthesis

Deoxyribonuclease I (DNase I) enzyme (Invitrogen) was used to remove the DNA contamination from RNA samples,if any. Briefly,1 μg of RNA was subjected to DNase I digestion by using 1 U of DNase I in a 10 μl reaction mixture which contained 1X DNase I buffer and appropriate volume of water. The reaction mixture was incubated at room temperature for 15 min. Post incubation,to inhibit DNase I enzyme activity,1 μl of 25 mM EDTA was added to the reaction mixture and tubes were heated at 65°C for 10 min. DNase I-digested RNA samples were used as template to perform PCR for the amplification of CgACT1geneandabsence of amplification product was used as criterion toconfirmproper DNase I digestion and lackof DNAcontaminationin the RNA sample

DNase I digestion

microcentrifuge tube. For precipitation of RNA, 1/10thvolume of 3 M sodium acetate (pH 5.3) and 2.5 volume of 100% ice-coldethanol was added. In order to facilitate precipitation, tubes werekept at -20°C for 20 min. Tubes were centrifuged at 13,000 rpm for 10 min in a refrigerated centrifuge. The RNA pellet was washed with 70% ethanol,resuspendedin 100-200 μl of nuclease-free water and stored at -20°C untiluse.Care was taken to keep allreagents and tubes on ice to maintain the cold temperature throughout theRNA extractionprocess

All reagents required for RNA extraction were preparedin DEPC-treated water. RNasecontamination from non-autoclavable items wasremoved by wiping them with RNaseZap® (Ambion). Total RNA from yeast cells was extractedusing acid phenolextractionmethod. Briefly, yeast cells were grown underappropriate conditions and at suitabletime points,cells were harvested by centrifugation at 4,000 rpm for 5 min. The cell pellet was washed twice with ice-cold DEPC-treated water, resuspended in 350 μl of AE buffer and transferred toa1.5 ml microcentrifuge tube. To this,40 μl of 10% SDS and 400 μl of acid phenol (pH 4.3) was added. The cell suspension was mixed well by vortexing thrice, short pulsesof10 seconds each,and incubated at 65°C for 15 min with continuous agitation at 800 rpm. Post incubation, cells were kepton ice for 5 min and centrifuged at 13,000 rpm in a refrigerated centrifuge set at 4°C for 10 min. After centrifugation, aqueous layer was transferred to a new1.5 ml microcentrifuge tube and 400 μl of chloroform was added. Tubes were mixed well by gentlyinverting them 4-5 times and centrifuged at 13,000 rpm for 10 min. The aqueous layer was separated and transferred to a new1.5 ml

Total RNA isolation

This method was used to isolate highly pure genomic DNA. Briefly, 10 ml overnight grownC. glabratacultures were spun downandwashed with 10 ml sterile water. Washed cells wereresuspended in500 μl sterile water and transferred toa1.5 ml microcentrifuge tube. Tubes were spundownat 4,000 rpm for 5 min, supernatant was discarded andcell pellet was resuspended in 500 μl of buffer containing 100 mM EDTA and 5% β-mercaptoethanol and incubatedat 42°C for 10 min. Post incubation, cells were spun down at 4,000 rpm for 5 min and resuspended in freshly prepared Buffer B. To this, one tip-full of lyticase (Sigma, L4025) was added and incubated at 37°C for 1 h.After incubation, spheroplasts were collected by spinning downtubes at 6,000 rpm for 5 min, supernatant was discarded and the pellet was resuspended in 500 μl of Buffer C. DNA was extracted twice with 500 μl of PCI (25:24:1) solution and the aqueous layer was transferred toa new1.5 ml microcentrifuge tube. To this, 2.5 volume of absolute ethanol and 1/10thvolume of 3 M sodium acetate (pH 5.3) wereadded. Tubes were spundownat 13,000 rpm for 10 min, DNA pellet was resuspended in 200 μl of 1X TE buffer containing0.3 μl of RNase cocktail (Ambion) and incubated at 37°C for30 min. DNA was precipitated again by adding absolute ethanol and sodium acetate as mentioned above. DNA pellet was washed once with 70% ethanol, centrifuged at 13,000 rpm for 10 min, air-dried at room temperature and was resuspended in 100-200 μl of 1X TE buffer by gently tapping the tube. DNAwas stored at -20°C until use

Spheroplast lysis method

Yeast genomic DNA was isolated by mechanically lysing the yeast cells. Briefly, 10 ml of overnight grown yeast culture was transferred toa 15 ml centrifuge tube andcells were spun down at 4,000 rpm for 5 min. Media was decanted and cells were washed with 10 ml sterile water. Washedcells were resuspended in 500 μl of Buffer A and transferred to a 1.5 ml microcentrifuge tube. Tubes were incubated at 65°C for 15 min. Post incubation,500 μl of PCI (25:24:1) solution was added. To this, 0.5 g of 0.5 mm glass beads were added and cells were lysed mechanically in a bead-beatinghomogenizer (MP Biomedicals,FastPrep®-24) thrice, 45 seceach, with intermittent cooling on ice. Tubes were spun at 12,000 rpm for 5 min and the aqueous layer was transferred to a new 1.5 ml microcentrifuge tube. To this, 500 μl of PCI solution was addedand mixed gently by inverting the tubes.Tubes were centrifuged again at 12,000 rpm for 5 min and aqueous layer was transferred to another 1.5 ml microcentrifuge tube. Next, 2.5 volume of absolute ethanol was added to the aqueous layer, mixed well and centrifuged at 13,000 rpm for 10 min. Supernatant was decanted and the DNA pellet was washed once with 70% ethanol and centrifuged at 13,000 rpm for 10min. Washed DNA pellet was air-dried and dissolved in 100-200 μl of 1X TE buffer by gently tapping the tubes

Glass bead lysis method

Bacterial transformation

Estimation of cytokine production by THP-1 macrophages upon infection with C. glabratacells

Total protein extraction and immunoblotting

For complementation studies, C. glabrataORFs, CgFTR1(1.22 kb), CgFET3(1.91 kb), CgYFH1(0.53 kb), CgCCW14(0.64 kb), CgMAM3(1.91 kb)andCgHOG1(1.34 kb) were PCR amplified from wild-type genomic DNA using Phusion high-fidelity DNA polymerase and cloned down-stream of the PGK1promoter intothe XmaIand XhoI, XbaIand XmaI, XmaIand XhoI, BamHIand SalI, XmaIand XhoI, and BamHIand XmaIsites, respectively, in the CEN-ARS containing plasmid pGRB2.2 (pRK74). For over-expression studies, C. glabrataORFs, CgCCC1(0.95 kb), CgYAP5(1.05 kb)andCgMRS4(0.92 kb) were PCR amplified from wild-type genomic DNA using Phusion high-fidelity DNA polymerase and cloned down-stream of the constitutive promoter PDC1into the BamHI and SalI, XbaIand XmaI, and XmaI and XhoIsites, respectively, in the CEN-ARS containing plasmid obtained from Addgene (Addgene-ID 45323). All clones were verified by PCR and sequencing analysis

Cloning of C. glabrataORFs

PCR-positive transformants were inoculated in 10 ml YPD medium, allowedto grow for 12 handgenomic DNAwas isolated.Another round of PCR was performed using genomic DNA asatemplate toconfirm the gene deletion

A homologous recombination-based strategy was used to disrupt C. glabraraORFs witha cassette containing the nat1gene, which codes for nourseothricin acetyltransferase and imparts resistance to nourseothricin. Briefly, 5’-and 3’-UTR region (nearly 500-700 bp) of the gene to be deleted were amplified by PCR using wild-type genomic DNA as template. Both 5’-and 3’-UTR amplified products were fused to one half each ofthenat1gene amplified from theplasmid(pRK625). The two nat1-amplified fragments share about 300-350 bp complimentary region. To obtain fusion products, primers were designed insucha way thatthereverse primer for 5’-UTR and the forward primer for 3’-UTRof the gene of interestshare 20 bp complimentary region with the forwardprimer for 5’nat1fragment andthereverse primer for 3’nat1fragment amplification, respectively. The fused PCR products were co-transformed in to the wild-type strain and transformants were plated on YPD-agar plates. Plates were incubated at 30°C for 16 h to allow the homologous recombination between nat1fragments,and 5’-and 3’-UTR atthegenomic loci. Post incubation,cells were replica plated ontoYPD-agar plate supplemented with 200 μg/ml nourseothricin and incubated for another 24 h. Nourseothricin-resistant colonies were purified and verified for gene disruption viahomologous recombination by PCR using appropriate set of primers

Generation of C. glabratadeletion strains

For Yeast colony PCR, yeast cells were subjected to zymolyase (MP Biomedicals, 0832092) digestion to obtain thespheroplast. To perform zymolyase digestion, a digestion cocktail was prepared in 1XPBS consisting of zymolyase (2.5mg/ml) and sorbitol (1.2 M). The cocktail was dispensed in 0.2ml PCR tubes in 10 μl aliquots anda tip-full of yeast cells wasadded to these tubes. Tubes were incubated at 37°C for 2-3 h and 1 μl of digested mixture was used as a template in a PCR reaction

Yeast colony PCR

To perform restriction digestion of plasmid DNA and PCR-amplified DNA products, restriction enzymes were procured from NEW ENGLAND Biolabs(NEB). Restriction digestion was set in 50 μl reaction volume with appropriate buffer and 1X BSA. For ligation of DNA fragments obtained after restriction digestion, T4 DNA Ligase enzyme (NEB, M0202M) was used. All ligation reactions were set in 20 μl reaction volume containing 1X ligase buffer, 3-10 units of DNA ligase enzyme and vector to insert molar ratio of 1:3. The ligation mixture waseitherincubated at 16°C for 16h or at room temperature for 2-3 h. Post incubation, ligation reaction was inhibited by heatingtubes at 65°C for 15-20 min.2-5 μl of ligation mixture was used to transform ultra-competent E. coliDH5αcells

To extract DNA from agarose gels,the QIAquick® gel extraction kit (QIAGEN, 28706) was used. For purification of PCR amplified DNA products,the QIAquick® PCR purification kit (QIAGEN, 28106) was used. Clean-up of enzymatic reactions was performedusing the MinElute® Reaction Cleanup kit (QIAGEN, 28204). Allprotocolswere followed as per manufacturer’s instructions

Restriction digestion and ligation

Gel extraction, PCR purification and Reaction clean-up

Bacterial plasmid DNA was isolatedusing the QIAprep® spin Miniprep kit (QIAGEN, 27106). 10 ml of LB medium supplemented with appropriate antibioticswas inoculated withasingle bacterial colony and incubated at 37°C for 12-16 h. Cultures were spun down at 8,000 rpm for 5 min, supernatant was discarded and the cell pellet was processed to isolate plasmid DNA as per instructions given in the kit. DNA was eluted either in nuclease-free water or in elution buffer provided in the kit and stored at -20°C until use

Plasmid isolation

were chosen for qPCR. For all qPCR reactions,0.4 μl of cDNA template was used in a 20 μl reaction volume. Reactionswere performed anddata wereanalysed in ABI7500 real-time qPCR machine. Amplified products were run on 2% agarose gel to confirm amplification ofthecorrect size product. CTvalues of respective products were normalized with corresponding CTvalue of the housekeeping gene CgACT1. Relative change in expression was determined by comparative CTmethod,also referred as 2-∆∆CTmethod, utilizing following equation.Fold change upon treatment=2-∆∆CT∆∆CT=∆CT Treated-∆CT Untreated∆CTTreated= CTvalue for gene of interest upon treatment-CTvalue of internal control (CgACT1)upon treatment∆CTUntreated= CTvalue for gene of interest without treatment-CTvalue of internal control (CgACT1)without treatmentThe reaction cycling conditions were as follows1)95°C for 10 min (initial activation)2)95°C for 15 sec (denaturation)3)55°C for 30 sec (annealing)4)72°C for40 sec (extension)5)Go to step 2 (40 cycles)6)72°C for 10 min (final extension)

MESA GREEN qPCR mastermix (RT-SY2X-03+WOULR) supplied by Eurogentech was used in all qPCR experiments. Primers for real-time qPCR experiments were designed by using the Primer3 plus software to obtain 120-200 bp amplification products. Standardization of optimaltemplate and primer concentrationconditionswas done in a PCR reaction and concentrations resulting in good amplification withoutprimer dimers

Quantitative Real-time PCR(qPCR)

Reverse transcriptase “Superscript III” (Invitrogen, 18080-051) was used to perform cDNA synthesis. Briefly, 500 ng of DNase I-digested RNA was incubated with 1 μl of 10 mM dNTP and 50 μM oligo(dT) at 65°C for 5 min in a 10 μl reaction mixture followed by cooling on ice for 5 min. Post incubation, 10 μl of cDNA synthesis mixture was added which contained 2 μl of 10XRT buffer, 4 μl of 25 mM MgCl2, 2 μl of 0.1 M DTT, 1 μl of RNase out (40 units) and 1μl of Superscript III (200 units). Tubes were incubated at 50°C for 1 h and thereaction was terminated at 85°C for 5 min. The quality of synthesized cDNA was checked by using it as a template in a PCR reaction to amplify the housekeeping gene CgACT1. Amplification of CgACT1was indicative of proper cDNA synthesis

Complementary DNA (cDNA) synthesis

Deoxyribonuclease I (DNase I) enzyme (Invitrogen) was used to remove the DNA contamination from RNA samples,if any. Briefly,1 μg of RNA was subjected to DNase I digestion by using 1 U of DNase I in a 10 μl reaction mixture which contained 1X DNase I buffer and appropriate volume of water. The reaction mixture was incubated at room temperature for 15 min. Post incubation,to inhibit DNase I enzyme activity,1 μl of 25 mM EDTA was added to the reaction mixture and tubes were heated at 65°C for 10 min. DNase I-digested RNA samples were used as template to perform PCR for the amplification of CgACT1geneandabsence of amplification product was used as criterion toconfirmproper DNase I digestion and lackof DNAcontaminationin the RNA sample

DNase I digestion

microcentrifuge tube. For precipitation of RNA, 1/10thvolume of 3 M sodium acetate (pH 5.3) and 2.5 volume of 100% ice-coldethanol was added. In order to facilitate precipitation, tubes werekept at -20°C for 20 min. Tubes were centrifuged at 13,000 rpm for 10 min in a refrigerated centrifuge. The RNA pellet was washed with 70% ethanol,resuspendedin 100-200 μl of nuclease-free water and stored at -20°C untiluse.Care was taken to keep allreagents and tubes on ice to maintain the cold temperature throughout theRNA extractionprocess

All reagents required for RNA extraction were preparedin DEPC-treated water. RNasecontamination from non-autoclavable items wasremoved by wiping them with RNaseZap® (Ambion). Total RNA from yeast cells was extractedusing acid phenolextractionmethod. Briefly, yeast cells were grown underappropriate conditions and at suitabletime points,cells were harvested by centrifugation at 4,000 rpm for 5 min. The cell pellet was washed twice with ice-cold DEPC-treated water, resuspended in 350 μl of AE buffer and transferred toa1.5 ml microcentrifuge tube. To this,40 μl of 10% SDS and 400 μl of acid phenol (pH 4.3) was added. The cell suspension was mixed well by vortexing thrice, short pulsesof10 seconds each,and incubated at 65°C for 15 min with continuous agitation at 800 rpm. Post incubation, cells were kepton ice for 5 min and centrifuged at 13,000 rpm in a refrigerated centrifuge set at 4°C for 10 min. After centrifugation, aqueous layer was transferred to a new1.5 ml microcentrifuge tube and 400 μl of chloroform was added. Tubes were mixed well by gentlyinverting them 4-5 times and centrifuged at 13,000 rpm for 10 min. The aqueous layer was separated and transferred to a new1.5 ml

Total RNA isolation

This method was used to isolate highly pure genomic DNA. Briefly, 10 ml overnight grownC. glabratacultures were spun downandwashed with 10 ml sterile water. Washed cells wereresuspended in500 μl sterile water and transferred toa1.5 ml microcentrifuge tube. Tubes were spundownat 4,000 rpm for 5 min, supernatant was discarded andcell pellet was resuspended in 500 μl of buffer containing 100 mM EDTA and 5% β-mercaptoethanol and incubatedat 42°C for 10 min. Post incubation, cells were spun down at 4,000 rpm for 5 min and resuspended in freshly prepared Buffer B. To this, one tip-full of lyticase (Sigma, L4025) was added and incubated at 37°C for 1 h.After incubation, spheroplasts were collected by spinning downtubes at 6,000 rpm for 5 min, supernatant was discarded and the pellet was resuspended in 500 μl of Buffer C. DNA was extracted twice with 500 μl of PCI (25:24:1) solution and the aqueous layer was transferred toa new1.5 ml microcentrifuge tube. To this, 2.5 volume of absolute ethanol and 1/10thvolume of 3 M sodium acetate (pH 5.3) wereadded. Tubes were spundownat 13,000 rpm for 10 min, DNA pellet was resuspended in 200 μl of 1X TE buffer containing0.3 μl of RNase cocktail (Ambion) and incubated at 37°C for30 min. DNA was precipitated again by adding absolute ethanol and sodium acetate as mentioned above. DNA pellet was washed once with 70% ethanol, centrifuged at 13,000 rpm for 10 min, air-dried at room temperature and was resuspended in 100-200 μl of 1X TE buffer by gently tapping the tube. DNAwas stored at -20°C until use

Spheroplast lysis method

Yeast genomic DNA was isolated by mechanically lysing the yeast cells. Briefly, 10 ml of overnight grown yeast culture was transferred toa 15 ml centrifuge tube andcells were spun down at 4,000 rpm for 5 min. Media was decanted and cells were washed with 10 ml sterile water. Washedcells were resuspended in 500 μl of Buffer A and transferred to a 1.5 ml microcentrifuge tube. Tubes were incubated at 65°C for 15 min. Post incubation,500 μl of PCI (25:24:1) solution was added. To this, 0.5 g of 0.5 mm glass beads were added and cells were lysed mechanically in a bead-beatinghomogenizer (MP Biomedicals,FastPrep®-24) thrice, 45 seceach, with intermittent cooling on ice. Tubes were spun at 12,000 rpm for 5 min and the aqueous layer was transferred to a new 1.5 ml microcentrifuge tube. To this, 500 μl of PCI solution was addedand mixed gently by inverting the tubes.Tubes were centrifuged again at 12,000 rpm for 5 min and aqueous layer was transferred to another 1.5 ml microcentrifuge tube. Next, 2.5 volume of absolute ethanol was added to the aqueous layer, mixed well and centrifuged at 13,000 rpm for 10 min. Supernatant was decanted and the DNA pellet was washed once with 70% ethanol and centrifuged at 13,000 rpm for 10min. Washed DNA pellet was air-dried and dissolved in 100-200 μl of 1X TE buffer by gently tapping the tubes

Glass bead lysis method

Yeast genomic DNA isolation

Molecular biology methods

E. coliDH5α ultra-competent cells were used for all bacterial transformations. Briefly, frozen DH5α ultra-competent cells were taken out from -80°C freezerandthawed on ice for 15 min. DNA to be transformed was added to the bacterial cell suspension and incubated on ice for 30 min. For transforming ligation mixtures and plasmids,5-10 μl and 100-500 ng of DNA was used, respectively. Followed by 30 min incubation on ice, heat shock was given for 60-90 sec at 42°C in a water bath and cells were immediately kept back onice for 2 min. To this,1 ml of sterile LB medium was added and tubes were incubated inashaker incubator set at 37°C, 200 rpm for 45 min.Next, cells were spun down and resuspended in 500 μl of LB medium. About 100-200 μl of resuspended cells were plated on LB-agar medium containing appropriate antibiotics and incubated for 12-16 h at 37°C. Transformants were purified on LB-agar plates containing appropriate antibiotics andpositive transformantscarrying desired DNAwere verified by PCR, restriction digestion and sequencing analyses

Bacterial transformation

E. colibacterial strain DH5α was taken out on LB-agar mediumfrom -80°C freezer and incubated at 37°C for 14-16 h. To obtain the starter culture,single bacterial colony was inoculated in 25 ml of SOB medium ina25 ml flask. The flask was incubatedfor 6-8 hat 37°C with continuous shaking at 200 rpm. Next, 2, 4 and 10 ml of the starter culture was inoculated in three different 1 litre flasks each containing 250 ml of SOB medium. Cultures were incubated overnightat 18°C with continuous shaking at 200 rpm. After overnight incubation, OD600 of allthree cultures were monitored after every 45 min interval till OD600of any of the three cultures reached 0.55. These cells werekept onice for 10 min and the other two cultures were discarded.Cells were harvested by centrifugation at 2,500g in a Sorvall GSA rotor for 10 min at 4°C. Supernatant was poured offcompletely andcells were gently resuspended in 80 ml of ice-cold Inoue transformation buffer by swirling the tubes (pipetting was avoided at this step). Followingresuspension, cells were spun down by centrifugation at 2,500g in a Sorvall GSA rotor for 10 min at 4°C and the supernatant was discarded completely. The cell pellet was resuspended gently in 20 ml of ice-cold Inoue transformation buffer by swirling.1.5 ml of DMSO was added to the cell suspension and incubated on ice for 10 min. 50 μl aliquotsof cell suspensionwere dispensed in pre-chilled 1.5 ml microfuge tubes, snap-frozen in liquid nitrogen and stored in -80°C freezer till further use

Preparation of ultra-competent E. colicells

ml YPD broth at an initial OD600of 0.1. Cultures were allowed to grow for 4-5 hin a shaker incubator setat 30°C, 200 rpm until the OD600of the cultures reached 0.4-0.6. Next,cells were harvested ina15 ml centrifuge tube by centrifugation, washed twice with 10 ml of sterile water, resuspended in 1 ml of sterile water and were transferred to a 1.5 ml microfuge tube. Cells were harvested by centrifugation at 4,000 rpm for 5 min,resuspended in 50 μl of100 mM lithium acetate solution and transformation mixture was added. Transformation mixture consisted of 240 μl polyethylene glycol (50%), 36 μl of lithium acetate (1 M), 5 μl of heat denatured single stranded carrier DNA (10 mg/ml), 500 ng to 1 μg of transforming DNA and final volume was made to 360 μl with sterile water. The tubes were incubated at 30°C for 45 min. To this, 43 μl of sterile DMSO was added and heat shock was given at 42°C for 15 min. Next, tubeswere transferred to ice for 10-15 sec, centrifuged at 4,000 rpm and transformation mixture reagents wereremoved completely by pipetting. Cells were resuspended in 200 μl of sterile water and spread-plated on appropriate selection medium. Plates were incubated at 30°C for 24-48 h

Yeast transformation was performed as described previously (Gietz et al., 1992) with fewmodifications. Briefly, overnight grown C. glabratacultures were freshly inoculated in 10

Yeast transformation

To phenotypically characterize C. glabratamutants,serial dilution spot growth assays were performed. Briefly, the optical density of overnight-grown C. glabratacultures wasnormalized to OD600of 1.0andnormalized cultures were further diluted 10-fold in 1X sterile PBS five times. 3 μl of serially diluted culture were spotted on test plates. Plates were incubated at 30°C (unless mentioned otherwise) for 24-48hand growth was recorded by capturing plate images. For experiments involvingchecking theability of mutants to utilize non-fermentable carbon sources,growth was scoredafter 6-7 days of incubation

Serial dilution spot growth assay

For time course growth analysis,C. glabratacells were inoculated in appropriate medium and grown for 14-16 h. Followed by overnight growth,yeast cells were sub-cultured in test medium at an initial OD600of 0.1 and growth was monitored by recording the absorbance of the culture at 600 nm at regular time-intervals till 72h. Absorbance values were plotted with respect to time and generation time of yeast strains were calculated between 4-8 h of growthwhen cells were in logarithmic phase of growth using following equation.Generationtime(G)=T2−T1Xlog2logNf/NiG = Generation time (h)T1 = Initial time point taken for analysisT2 = Final time point taken for analysisNf= Number of cells at time T2 (1 OD600of C. glabratacorresponds to 2 X 107cells)Ni = Number of cells at time T1 (calculated from OD600 value as mentioned above)For CFU-based viability assays, appropriate dilutions of yeast cultures were prepared in 1X sterile PBS and suitable volume of diluted cultures wasplated on YPD-agar medium. Plates were incubated at 30°C for 24-48 h and viable colonies that appeared on YPD-agar plate were counted.To obtain logarithmic phase cells, overnight-grown C. glabratacell suspension was inoculated in appropriate medium at an OD600of 0.1 and grown ina shakerincubator set at 30°C, 200 rpm for approximately 4 htill the culture density reached OD600of 0.4-0.6

Time course growth analysis and determination of generation time

C. glabratastrains were routinely grown in rich YPD medium or synthetically defined YNB medium, or YNB medium supplemented with CAA, unlessstatedotherwise.To obtain overnight grown liquid cultures, C. glabratacells were inoculated in appropriate medium and incubated at 30°C under constant agitation (200 rpm) to maintain proper aeration.To revive the frozenstocks,about one tipfull of frozen culture was streaked either on YPD-agar or on CAA-agar medium. In general, frozen stocks of C. glabratastrains were revived on YPD-agar medium.However,C. glabratastrains harbouring plasmidscontainingURA3as a selectable marker were revived on CAA-agar medium. After streaking, plates were allowed to grow for 24-48 h at 30°C and were stored at 4°C for a maximum period of two weeks. For long term storage, freezer stocks of C. glabratastrainswere prepared in 15% glycerol and stored at -80° C.Escherichia colistrain DH5αwas revived on LB-agar medium from frozenstock and incubated at 37°C for 14-16 h. DH5α strainwas used for transformation purpose and maintaining plasmids. Bacterial strains harbouring plasmids containing selection markerswere revived on LB-agar medium supplemented with appropriate antibiotics.Bacterial liquid cultures were either grown in LB broth or LB broth containing suitable antibioticsand incubatedin a shakerincubator set at 37°C, 200 rpm for 14-16 h. For preparation of bacterial frozenstocks, 1 ml overnight grown bacterial culture was added to500 μl of 50% glycerolto obtain final concentration of ~16 % glyceroland stored at -80°Cuntil use

Strains and culture conditions

Microbiological methods

PMA-treated THP-1 cells were seeded toa24-well tissue culture plate to a cell density of 1 million cells per well and allowed to grow for 12 h. After12 hincubation,spent medium was replaced with fresh pre-warmed RPMI-1640 medium andcells were allowed to recover for 12 h before use.C. glabratacells were grown in YNB medium for 14-16 h at 30°C and 200 rpm. 1 ml of theseC. glabratacells were harvested in 1.5 ml centrifuge tubes, washed twice with 1X sterile PBS and the cell density was adjusted to 2x107cells/ml. 50 μl of this cell suspension was used for infection to a MOI of 1:1. Two hours post infection, wells were washed thricewith 1X sterile PBS to remove the non-phagocytosed yeast cells and 1 ml of fresh pre-warmed RPMI-1640 medium was added. Plates were incubated under tissue culture conditions at 37°C and 5% CO2for 24 h. Supernatants were collected in 1.5 ml microfuge tubes, centrifuged at 3,000 rpmto remove the particulate matter, if any, and stored at -20°C until use. Estimation of different cytokines were performed using BD OptEIA ELISA kits as per the supplier’s instructions

Estimation of cytokine production by THP-1 macrophages upon infection with C. glabratacells

To perform survival analysis of C. glabratacells in macrophages, PMA-treated THP-1 cells were seeded to 24-well tissue culture platesto afinal celldensity of 1 millionper well. C. glabratacells were grown in YNB medium for 14-16 h at 30°C and 200 rpm. 1 mloftheseC. glabratacells were harvested in 1.5 ml centrifuge tubes, washed twice with 1X sterile PBS and the cell density was adjusted to 2x106cells/ml. 50 μl of this cell suspension was used to infect PMA-activated macrophages to a MOI (multiplicity of infection) of 0.1. Two hours post infection, THP-1 cells were washed thrice with 1X sterile PBS to remove the non-phagocytosed yeast cells and 1 ml of fresh pre-warmed complete RPMI-1640 medium was added.At different time points, infected THP-1 macrophages were osmolysed with1 ml sterile water. Post lysis,lysates were collected by scraping the wells using 1 ml microtip. Lysates were diluted in 1X sterile PBSand appropriate dilutions were plated onYPD-agar plates. Plates were incubated at 30°C for 24-48 h and colony forming units (CFUs) were counted. Final CFUs/ml were determined by multiplying CFUs withappropriate dilution factor and percentage phagocytosis was calculated by dividing CFUs obtained at 2 h post infection by total numberofyeast cells used for infection. Fold replication was calculated by dividing the CFUs obtained at 24 h post infection by CFUs obtained at 2 h post infection

THP-1 macrophageinfection assay to monitor the intracellular survival and replication of C. glabrata

phorbol myristateacetate (PMA) (Tsuchiya et al., 1982). For PMA treatment, THP-1 cells were allowed to grow till 70-80% confluence and were collectedin a centrifuge tube by centrifugationat 1,000 rpm for 3 min. THP-1 cell pelletswere resuspended in 4-5 ml of pre-warmed complete RPMI-1640 medium, 100 μl of this cell suspension was appropriately diluted in PBS (1X) and viability was determined by counting trypan blue stained cellsusing hemocytometer. THP-1 cell suspension was diluted appropriately to obtainafinal cell density of 106cells/ml with pre-warmed complete RPMI-1640 medium. PMA was added totheTHP-1 cell suspension at a final concentration of 16 nM and mixed well by gently inverting the tubes. PMA-treated cells were seeded either in 24-well cell culture plates or in cell culture dishes and allowed to grow for 12 h under tissue culture conditions i.e. at 37°C and 5% CO2.After 12 h incubation, spent medium was replaced withfresh pre-warmed complete RPMI-1640 medium and cells were allowed to recover for another 12 h

THP-1 monocytes getdifferentiated intophagocytic macrophages upon treatment with

PMA (Phorbol myristateacetate) treatment of THP-1 monocytic cells

For cryopreservation of THP-1 and Lec-2 cells, 5-6 million cells wereresuspendedin 0.5 ml of eithercommercially procuredcell preservation medium from GIBCO(12648010)or complete medium supplemented with 10 % fetal bovine serum and 10 % DMSO.Cells were initially kept inanisopropanol bath and werelatertransferred to -70°C freezer. After 2-3 days, frozencells were transferred to liquid nitrogen container till further use. To revive the cells, frozenstockswere taken out of the liquid nitrogen container and immediately transferred to water bath set at 37°Cfor thawing. When freezing medium has thawed completely, cells were transferred to a 100 mm cell culture dishcontaining 12 ml completemedium and incubated under tissue culture conditions at 37°C and 5% CO2for 12 h. Afterincubation, medium was replaced by 12 ml fresh pre-warmed medium and incubated under tissue culture conditions till they reached 70-80% of confluencebefore splitting

Cryopreservation and revival of cell lines

Human monocytic cell line THP-1 (ATCC TIB-202TM), derived form 1 year old acute monocytic leukemia patient,wasused to perform single cell infection assays. Differentiation of these THP-1 monocytic cellsto phagocytic cells was induced by using phorbol myristateacetate (PMA)(16 nM). Lec2 (ATCC CRL-1736TM),an ovary epithelial cell line,which has beenderived fromtheChinese hamster Cricetulus griseus, wasused to determine the adherence of C. glabratacells. THP-1 and Lec-2 cells were routinely cultured and maintained in RPMI-1640 and α-MEM media, respectively, supplemented with10 % heat inactivated fetal bovine serum, 2 mM glutamine, penicillin (100 units/ml) andstreptomycin (100 μg/ml). Cultures were maintained in cell culture incubator (Thermo scientific)at 37°C and 5% CO2. Cultures were split after every 2-3 daysandspent medium was replaced with fresh pre-warmed medium. For splitting, cells were harvested at 1,000 rpm for 2-3 min, spent medium wasdiscarded and cell pellet was resuspended in 4-6 ml of pre-warmed medium. Cell density was determined by using hemocytometer. A total of3-4 million cells were seeded in a 100 mm cell culture dishcontaining 12 mlfresh medium

Cell lines and culture conditions

Animal cell culture methods

Statistical analysis was performed using GraphPsssad Prism 5. Data are presented as mean ± SEM. The difference between two groups was analyzed using either a two-tailed Student’s t-test or a nonparametric two-tailed Mann-Whitney test, as appropriate. The differences between multiple groups were analyzed by one-way ANOVA, using Tukey’s multiple comparison test for parametric data and Kruskal-Wallis test for non-parametric data. P<0.05 was considered as statistically significant. The cell numbers used to obtain quantitative data (n) and the number of independent experiments performed is indicated in the respective figure legends

Data analysis

Ip6k1-/-(4 male, 5 female)] were exposed to 4NQO (100 μg/mL) in their drinking water. Mice were allowed free access to drinking water containing the carcinogen, and the water was changed every week.Water bottles containing carcinogen was covered with foil to avoid exposure to light. All the apparatus used for this study and remaining water were decontaminated using 1% sodiumhypochlorite for 30 min. Every week water consumption and weight of the each animal was monitored. Mice displaying any characteristics of weight loss or dehydration before 24 weeks were euthanized and examined for lesions. After 24 weeks, mice were euthanized by CO2inhalation and a complete necropsy was performed. Tissues from the aerodigestive tract (tongue, esophagus, stomach,and duodenum) werefixed in formalin and paraffin-embedded sections were stained with hematoxylin and eosin (H&E) to examine thelesions by light microscopy.Images were acquired using a bright field light microscope (Nikon ECLIPSE Ni, NIS Elements acquisition software, 20x 0.5 N.A. objective). During the pathologicalexamination, the lesions observed in the various tissues were categorized into hyperplasia, dysplasia,and invasive carcinoma. Hyperplasia was defined as an increase in the layers or thickening of the epithelium with hyperkeratinization. Dysplasia was defined as loss of epithelial cell polarity, nuclear pleomorphism and abnormal mitoses confined to the epithelium. Invasive carcinoma was defined as invasion of dysplastic cells or lesions into subepithelial tissues such as submucosa and muscle

Carcinogenesis studies were conducted as described previously for Ip6k2-/-mice (Morrisonet al., 2009). Briefly, the carcinogen, 4NQO stock solution (5 mg/mL) was prepared fresh in propylene glycol every week. Four-week old mice [11 Ip6k1+/+(5 male, 6 female) and 9

Carcinogenesis studies

HCT116 cells stably expressing NT or shRNA against IP6K1were grown to subconfluence. Logarithmic phase monolayer cultures were harvested by trypsinization, cell number was determined using a hemocytometer,and resuspended in complete DMEM. Before injection, cells were washedand resuspended in PBS at 2×107cells/mL. Approximately 2×106 cellswere injected subcutaneously into either flank of 6 week old female homozygous Foxn1nuathymic nude mice(n= 8 mice) and tumor size was monitored every 3 days for a period of 4 weeks. Mice were euthanized 4 weeks after injection and tumors were surgically excised and weighed

In vivoxenograft model

hemocytometer. 2 mL of cell suspension containing 2×104cells/mL were aliquoted in 15 mL conical tubes. To prepare top agarose (0.3%), 3 mL of prewarmed 0.5% agarose mixture was added to the 2 mL cell suspension, mixed gently by pipetting up and down to avoid air bubbles. Quickly 2 mL of this mixture (cells+0.5% agarose mixture) was transferred to the plate containing 2 mL top agarose. All the samples plates were kept at room temperature (TC laminar flow hood) for at least 60 min to solidify the top agarose. After agarose solidification, plates were incubated at 37°C and 5% CO2for 28 days. Every 2 days, spent media was replaced with 0.5 mL fresh media to prevent it from drying. After 28 days, colonies were stained with 0.005% crystal violet (in 2% ethanol) for 1 h at 37°C. Excess stain was washed with 2% ethanol until clear visible colonies were seen. Plates were imaged using AlphaImager (Alpha Innotech), and the number of colonies was determined by ImageJ software. Multiple images of stained colonies were acquired on a phase contrast inverted microscope(Zeiss)at 5x objective with 1.2 N.A using ProgRes CapturePro v2.8 acquisition software. Area of the individual colonies was determined using ImageJ software

Anchorage-independent cell growth was conducted in 6 well plates at least in triplicates. 1% of low temperature melting agarose (Difco) was prepared in sterile MQ water and mixed with 2X DMEM containing 20% FBS kept warm at 37ºC. Both the solutions were mixed in equal proportion to get 0.5% agarose in 1X DMEM and 10% FBS. This solution was kept warm throughout the experiment at 37ºCin a water bath or incubator. To prepare base agar (0.5% agarose), 2 mL of this solution (0.5% agarose+1x DMEM+10% FBS) was dispensed in 6 well plate to spread evenly without any bubbles and allowed to solidify at room temperature at least for 30 min. Cells were harvested and counted using a

Anchorage independent growth

Scratch wound healing assay was performed as described previously (Raoet al., 2015). Cells were seeded in 6 well plates in triplicates to attain confluence. On the next day, a scratch was made on the confluent monolayer culture using a 200 μL pipette tip. Cells were washed gently twice with PBS to remove floating cells, replaced with complete DMEM and incubated at 37ºC with 5% CO2.Images were acquired using a Zeiss phase contrast inverted microscope (ProgRes CapturePro v2.8 acquisition software, 5x 0.12 N.A. objective). Images were acquired immediately after scratch (0 h) and after a period of 4 h (MEFs) or 24 h (HeLa and HCT116) to monitor wound closure. The area of wound closure was analyzed using ImageJ software, and the data was plotted as total area covered in square μm(μm2)

Scratch wound healing assay

shRNA were processed for invasion studies. A suspension of 1×105cells in 200μLof 1%FBS containing DMEM was prepared and plated as described in Section 2.2.16. Cells were incubated at 37ºC with 5% CO2for 24 h to allow invasion. Downstream processing of the samples i.e. removing non-invading cells, staining and imaging were followed as described in Section 2.2.16. The number of cells invadedto the lower surface was quantified by counting the total number of DAPI positive nuclei in at least 10 random fields. The total number of cells invaded was normalized to non-targeting control cells and expressed as percentage invasion

Invasion assays were conducted as described previously (Raoet al., 2015).Invasion chambers with pre-coated matrigel (BioCoat Matrigel invasion chamber, 24 well, 8 μm pore size, Corning) were used to conduct the invasion assays. Packages containing invasion chambers were kept outside and allowed to come to room temperature. Inserts were equilibrated by adding with 500 μLwarm (37ºC) 1% FBS containing DMEM to the upper chamber of the insert and bottom well of the companion plate, and rehydrated for 2 h in a humidified tissue culture incubator at 37ºCwith 5% CO2. The rehydration media was removed carefully without disturbing the pre-coated matrigel matrix on the membrane. Meanwhile, HCT116 cells expressing either non-targeting or IP6K1 targeting

Invasion assay

and pelleted down at 1200 rpm for 5 min. The supernatant containing 10% FBS and trypsin were discarded and the cell pellet was resuspended in media containing 1% FBS. 5×104cells suspended in 200 μLDMEM (1% FBS) was added to the upper chamber and carefully transferred to the well of the companion plate containing 700 μLof complete DMEM (10% FBS) to serve as chemotactic agent. Inserts were lifted with sterile forceps and placed in the companion plate by avoiding any bubbles at the bottom surface of the insert. Cells were incubated at 37ºC with 5% CO2for 18 h (MEFs) and 24 h (HeLa and HCT116 cells) to allow migration. At the indicated time, cells on the upper surface of the filter were removed carefully by scrubbing with wet cotton swabs and inserts were dunked twice in excess PBS. Cells that migrated to the lower surface of the filter were rinsed twice with PBS, fixed with 4% paraformaldehyde for 15 min at room temperature. Post fixation inserts were rinsed in PBS twice and air dried at room temperature. Filters were cut carefully through the edges using a scalpel blade and placed inverted on a clean slide so that the migrated cells faced the upward direction. Filters were mounted with vectashield DAPI and covered with a clean coverslip. Migrated cells stained with DAPI were counted by imaging multiple fields using anepifluorescence inverted microscope (Olympus lX51,Image-Pro AMS 6.0 acquisition software, 20x 0.45 N.A. objective).The number of cells migrated to the lower surface was quantified by counting the total number of DAPI positive nuclei in at least 10 random fieldsper sample

Transwell migration assays were conducted as described previously (Raoet al., 2015). Transwell inserts (24 well, 8 μm pore size, Costar, Corning)were used to conduct migration assays. Inserts were equilibrated by adding 1% FBS containing media to the upper chamber, as well as lower chamber of the insert (companion plate) and placed in a 37ºC incubator with 5% CO2till use. Cells were harvested, counted using hemocytometer

Transwell migration assay

Cells were seeded in six well plates. After attaining optimal growth, cell lysates were prepared by scraping cells in 1x Laemmli buffer and samples were processed by standard western blot techniques. To detect FAKactivation samples were processed as described in Section 2.2.13. Briefly, 2 x106cells (6 x105cells per time point) were held in suspensionin complete medium containing 1% methylcellulosefor 90 min (Susp), andreplatedon fibronectin (2 μg/mL) coated surfacesfor 20 min (+FN)or for 4 h (SA -stably adherent). Cells at each time point were lysed in 1x Laemmli buffer and subjected to immunoblotting. Membranes were probed with specific antibodies(Table 2.3)and detected using the ECL detection system (GE Healthcare) as described in Section 2.2.10

the selection marker.Knockdown was confirmed by immunoblot analysis with an IP6K1 specific antibody (Table 2.3) as described in Section 2.2.10

lines were used for stable knockdown of IP6K1 expression. Viral particles harboring either non-targeting control or IP6K1directed shRNA were used to infect HeLa or HCT116 cell lines at 0.5 MOI, following treatment with polybrene (8 μg/mL)for 2 h.After 48 h, transduced cells were selected with 2 μg/mL puromycin. Medium was changed twice a week and observed for colony formation. After reaching the optimum growth, selected cells were maintained in DMEM supplemented with 10% FBS and 1 μg/mL puromycin as

Generation of stable cell lines expressing shIP6K1-HeLa and HCT116 cell

HEK293T packaging cellswere seeded at 30-40% confluency in 60 mm dishes. After 24 h, cells were co-transfected with three plasmids required for viral production i.e. VSV-G, psPAX2 (Addgene plasmid # 12260) and pLKO.1-puro-non-targeting and shIP6K1 clones using polyethyleniminereagent(PEI) and incubated at 37°C and 5% CO2 for virion formation. After 48 h, viral particles were harvested by collecting supernatant and filtered througha 0.45 μm syringe filter unit. Viral stock was aliquoted and stored at -80°C for further use. Viral titer was approximated on the number of cells plated for the production of lentivirus. Calculations were done as per Cell Bio Labs instruction. 2 x 106cells will yield 107infectious units/mL. All necessary precautions were taken while generating lentiviral particles such as wearing mask, double gloves, and sterile filter tips. All the consumables used were bleached (1% sodium hypochlorite solution) at least 1 h before being discarded

Generation of lentiviral particle containing shRNAagainst human IP6K1-

Immunoblot analysis to detect pFAK

fluorophore-conjugated phalloidin (Alexa Fluor 488 or rhodamine) for 45 min, followed by DAPI staining for 2 min. Cover slips were mounted onto glass slides using Fluoromount G (Southern Biotech) or Vectashield (VectorLabs),and imaged using an LSM 710 laser confocal-anisotropymicroscope (Zeiss, Zen acquisition software, 40x 1.3 N.A. objective) for 15 min spreading,or LSM 510laser confocal microscope (Zeiss, LSM acquisition software, 63x 1.4 N.A. objective) for 24 hspreading.To measure the cell spread area for serum depleted cells (0.2% serum), images captured at identical zoom settings were analyzed using the Image J software (NIH)as follows:thresholdvalues were set to define the cell edge and amaskwas then createdfor each cellto get the totalcellarea(with arbitrary units)within the mask.For 15 min spreading (10% serum) and 24 h spreading, the exact spread area was calculated based on pixel dimensions during image acquisition

Cell spreading assays were done as described previously (Balasubramanianet al., 2010).Briefly, cells were cultured in complete medium (10% FBS) or subjected to serum starvation (0.2% FBS for 12-14 h), trypsinized, counted using a hemocytometer, and held in suspension in the same medium containing 1% methylcellulose at 37°Cand 5% CO2in a 50 mL tube in a slanted position. After 90 min, cells werepelleted down at 1350 rpm for 8 min at 4°Cand the supernatant was discarded leaving 5 mL at the bottom. Cells were dislodged or displaced gently without touching the walls of the tubes, which might lead to activation of adhesion dependent signalling. Now, cells were washed once with excess of cold media (4°C)and one more time with warm media (37°C). A day before the experiments coverslips were coated with fibronectin (2 μg/mL)overnight at 4°Cand washed once with PBS before plating the cells. Cell suspension equivalent to 105cells was plated onto each fibronectin (2 μg/mL) coated coverslip and allowed to spread for 15 min or24 hin serum depleted (0.2% FBS) or complete medium. At each time point, unadhered cells were washed off with PBS and the coverslips were fixedwith 3.5-4% paraformaldehyde for 20 minat room temperature. After fixation coverslips are washed thrice with PBS and cells were permeabilized with 0.1% Triton X-100 for 5 min,followed by blocking with 5% BSAfor 30 min at room temperature. Fixed cells were stained with

Cell spreading

Cell adhesion assayswereperformed as described previously (Hockinget al., 1998)withslight modifications. Fibronectin coating was done overnight at 4°C. 5×104 cells were seeded per well onto fibronectin (2 μg/mL) coated 24 well platesin triplicates. Cells were allowed to adhere for different time periods. At each time point, unadhered cells were washed away with PBS; adhered cells were trypsinized and counted with a hemocytometer. Percentage of adhesion was calculated by normalizing total number of adhered cells at each time point to number of cells adhered after 5 h

Cell adhesion assay

Generation of stable cells expressing shIP6K1 in HeLa and HCT116

supernatant was collected and filtered through a 0.45 μm syringe filter unit. Lentiviral particles carrying either non-targeting shRNA or both IP6K2 directed shRNA constructs were used to infect MEFs for 48 h. At the 36thhour, cells were treated with HU for 12 h, followed by recovery for 6 h, and immunofluorescence was carried out as described in 2.2.6.Immunoblotting with an IP6K2 antibody(Table 2.3) was performed to analyse knockdown levels as described in Section 2.2.10

(Sigma-Aldrich SHC016) or shRNA directed against mouse Ip6k2(Sigma-Aldrich, TRCN0000202175 or TRCN0000202065), were co-transfected with VSV-G and VSV-GP encoding plasmids into thePhoenix amphotropic packaging cell line, using Polyfect reagent (Qiagen), and incubated at 37°C and 5% CO2for virion formation. After 48 h, the

IP6K2 knockdown by shRNA-Plasmidsencoding either a non-targeting shRNA

Dishes containing adherent cultures were placed on ice and washed once with cold PBS. Cells were scraped in 1x sample buffer on ice. Samples were sonicated in a probe sonicator (Misonix ultra sonic liquid processor, S-4000) 3 times for 15 sec each to complete cell lysis and shear DNA to reduce viscosity. Equal volumes of lysates were loaded and resolved using 12% SDS-PAGE. Samples were stored at -80ºC if necessary. Protein transfer onto PVDF membrane (GE Healthcare) was carried out at 200mA constant current for 2 h by placing the transfer tank in ice. Membranes were blocked with appropriate blocking buffer according to manufacturer’s instructions provided for each antibody. Preferentially TBST with 5% non-fat dry milk was used for blocking and for antibody dilutions. Briefly, non-specific interactions were blocked with blocking buffer (TBST+5%non-fat dry milk) for 1 h at room temperature. Membranes were probed with appropriate primary (overnight at 4ºC) and HRP-conjugated secondary antibodies (2 h at room temperature). Proteins were detected using ECL detection system. Chemiluminiscence was detected using the LAS4000 (GE Healthcare) or FlourChem E (Protein Simple) documentation system. Densitometry analysis of bands was done using ImageJ documentation software (Fiji) or the multiplex band analysis tool in AlphaView software (Protein Simple)

Western blot analysis

dropped on clean prechilled slides held at a 45°angle from a height of 18 inches, dried at 55°Con a hot plate and stained with 3% geimsa in phosphate buffer (pH 6.8) for 10 min. Slides were washed three times and dried, individual metaphase spreads were analyzed using bright field microscopy (Zeiss Axio Scope), and chromosomal aberrations were scored manually from each spread

MEFsplated in 6 cmdishes were treated with MMC (300 nM) for 12 h. Post damage cells were treated with colcemid (0.1 μg/mL) for 4 hto arrest cells in metaphase. After 4 h cells were washed twice with PBS to remove traces of colcemid and harvested by trypsinisation, pelleted down at 100 x g for 5 min in 15 mL conical tubes. The supernatant was removed by leaving 0.5 mL and resuspended thoroughlyby pippeting. Cells were subjected to hypotonic swelling in pre-warmed 0.075 M KCl for 15 min at 37°C[Note: key to this step is to add hypotonic solution drop by drop slowly otherwise cell clumps will form which are impossible to disperse. Add a few drops first then pipette the cells up and down to mix them thoroughly and add few more drops. Invert tubes 2-3 times during the incubation]. After 15 min cells were fixed by adding few drops of chilled fresh fixative (methanol: glacial acetic acid; 3:1) kept in the deep freezer. Cells were pelleted down at 100 x g for 8 min, the supernatant was removed, 0.5 mL of fixative was left behind and the pellet was resuspended very gently. Slowly fresh fixative was added in the same manner as the KCl solution and cells were pelleted down at 100 x g for 8 min; this step was repeated twice. The supernatant was removed by leaving 0.5 mL fixative and the cells were resuspended and mixed well before preparing metaphase spreads. Cell suspensions were

Cytogenetic analysis

were mixed or shaken every 15 min during the incubation as to keep them in suspension. At the end of the incubation, cells were washedagain with 800 μLof rinse bufferby centrifugation at 500 x gfor 6 min and the supernatant was aspirated. BrdU incorporation was detected by adding 100 μLof antibody staining solution containing 5 μLAlexa488 dye labeled anti-Brdu antibody with 95 μLof rinse buffer(1:20 dilution), and the cell suspension was incubated for 30 min at room temperature in the dark.At the end 350 μLof PI staining buffer was added to each sample and incubated for an additional 30 min at room temperature in the dark. Cells were analyzed forthe presence of DSBs by flow cytometry on a FACS ARIA instrument (BD). Viable cells were analyzed for the presence of DNA DSBs by excluding the hypodiploid (<G0/G1)population, using FACS DIVA software (BD). Medianfluorescence values of the treated cells were plotted as a fold difference over untreated controls, using GraphPad Prism 5

Cells were grown in 35mm dishes at 30% initial confluence. At 60% confluence, cells were treated with 0.2 mMhydroxyurea for 12 h. After treatment,media containing drug was removed and fresh media was added for recovery of the cells from genotoxic stress.DNA DSBs were monitored during the treatment period and recovery period of 3, 6, 9 and 12 h. At each time point cells were harvested and fixed using 70% icecold ethanol by gentle vortexing at very low speed and kept overnight at -20ºC. A TUNEL assay to detect DSBs was conducted using Apo-DirectTunel assay kit (A35127, Invitrogen). After overnight fixation, cells were washed with 800 μLof wash buffer, and 50 μLof DNA labeling solution [10 μL reaction buffer, 0.75 μL of TdT enzyme, 8 μL of BrdUTP and 31.25 μLof dH2O (Sigma)]was added to each sample, incubated at 37ºC for 4 h. Samples

Detecting DNA DSBs by TUNEL assay

The IP6K inhibitor TNP was dissolved in DMSO at a concentration of 22.6 mM and stored at -20°C. MEFs were seeded on coverslips in 12 well plates at 15% confluence. Once, cells adhered and attained their morphology, they were pre-treated with 5 μM TNP and DMSO 3 h prior to HU treatment. After 3 h, cells were treated with 0.5 mM HU for 12 h in presence or absence of TNP. Similarly, post drug removal,cells were incubated with or without TNP to monitorrecovery for 6 h. At each time point cells were processed for presence of nuclear BLM as described in Section 2.2.6. BLM was used as readout for initiation and completion of repair. Imageswere acquired as described in Section 2.2.6

Inhibition of IP6Ksin MEFs

ncubated with appropriate Alexa-488 conjugated secondary antibodies diluted in PBST with 2% BSA at room temperature for 1 h (for dilutions refer to Table-2.3). The cover slips were washed with PBST, mounted on glass slides using Vectashield mounting medium with DAPI. Images were acquired on a LSM 510 META confocal microscope (Zeiss, LSM acquisition software, 63x 1.4 N.A. objective) at a 0.7 scan zoom to collect maximum number of cells per field. The number of foci in each nucleus was manually counted by changing contrast identically across all the samples. A minimum of 10 random fields were imaged per sample. Data are represented as average number of foci per nuclei.

Localization of the DNA damage response proteins γH2AX, Rad51 and BLM and mitotic marker H3S10 (Histone H3 phosphorylated on Ser10) upon genotoxic stress and recovery was analyzed by immunofluorescence, following hypotonic lysis. Cells were seeded on cover slips in 12 well plates at 10-15% confluenceand incubated overnight. Cells were treated with 0.5 mM hydroxyurea and 0.25 μg/mL neocarzinostatin for 12 h. Coverslips were washed twice with PBS and cells were incubated in hypotonic lysis buffer containing 10mMTrisHCl (pH 7.4), 2.5mM MgCl2, 1mM PMSF and 0.5% NP-40, on ice for exactly 8 min on a shaker at 50-60 rpm. Cells were washed twice on ice, with ice cold PBS for2 min, with continuous shaking. Fixation was carried out with ice-cold 100% ethanol (which hadbeenkept overnight in -20°C) for 4 min, shaking on ice. 500 μLof ethanol was added to each cover slip during fixation. Cells were washedthrice with 1 mL PBS containing 0.2% Tween-20 (PBST), for 8 min each,at room temperature with shaking.Nonspecific interactions were blocked by incubating the cells for 30 minwith 2% BSA diluted in 1X PBS. Cover slips were again washed twice with 1 mLPBST, incubated with appropriate primary antibody (Table-2.3) diluted in PBS + 0.2% BSA for 2 h at room temperature. 200 μLof antibodywasplaced directlyonthecover slips. Post incubation, the cover slips were washed thrice with 1 mL PBSTfor 3 min each and the cells were

Immunofluorescence

the same solution and stored overnight at 4ºC. Fixed cells were permeabilized with 100 μL saponin based permeabilisationbuffer and wash buffer for 2 minin the dark. Cells were pelleted down and washed twice with saponin based permeabilisation buffer, centrifuged to pellet the cells and the supernatant was aspirated leaving 30-40 μLbuffer to dislodge the pellet. EdU was detected by adding 350 μLof Click-iT reaction cocktail and incubated for 30 min at room temperature in the dark. Cells were washed once with permeabilisation buffer and DNA content was measured by adding 5 μL Ribonuclease A and 2 μLof cell cycle dye 633 red incubated for 15 min at room temperature in the dark. Cells were analyzed by flow cytometry (FACS ARIA, Becton Dickenson). Data analysis to determine the stages of thecell cycle was performed using FACSDiva (BectonDickenson), and results were plotted using GraphPad Prism 5

Cell cycle analysis by PI staining is based on the DNA content of cells and cannot distinguish G0from G1, and G2 from M phase. One more limitation is that it provides overlapping cell populations in different phases. Alternatively, multi parameter based cell cycle analysis can be performed using EdU (5-ethynyl-2’-deoxyuridine, a BrdU alternative)labeling which exclusively distinguishes cells in S phase from other phases of cell cycle. EdU labeling and cell cycle analysis was conducted using the Click-iT cell proliferation assay kit (C35002, Invitrogen), as per the manufacturer’s instructions. Briefly, cells were grown in 35mm dishes at 30% initial confluence. At 50-60% confluence, cells were treated with 0.2 mM HU for 12 h. After treatment, media containing drug was removed, gently washed twice with PBS and replaced with fresh media. Cells were allowedto recover for different time periods such as 3, 6, 9 and 12 h to observe arrest and release into S-phase. At each time point cells were labeled with 25μM EdUfor 30 min before harvestingby trypsinisation. Harvested cells were washed with 1% BSA in PBS and fixed with 100 μLof ClickiT-fixative containing 3% paraformaldehyde for 15 min at room temperature. After fixation, cells were again washed with 1% BSA in PBS, resuspended in

Cell cycle analysis by EdU labeling

Cell viability can be monitored by changes in the morphology of the cell or by membrane permeability to certain dyes such as PI. When exposed to PI, viable cells do not take up PI due to the presence of an intact membrane whereas dead cells take-up PI due to loss of membrane integrity. Briefly, cells were treated with HU for 12 h, and allowed to recover for different lengths of time as described in Section 2.2.2. At each time point, cells were harvested by trypsinisation and washed with PBS. Approximately 106cells were resuspended in 1 ml PBS and stained with 2μg/mL (final concentration) PI for 2 min at room temperature. The extent of PI staining was used to determine the viable and dead population by flow cytometry analysis (Accuri C6, Becton Dickenson). Nonviable cells were approximately 100 fold brighter than the unstained (viable cells) cells

PI live dead analysis

Cells were grown in 35 mm dishes at 20% initial confluence. At 40-50% confluence, cells were treated with different genotoxic agents as described in Section 2.2.2. Post treatment, cells were washed twice with PBS and replaced with fresh media to allow recovery for different lengths of time. At each time point, cells were harvested and fixed with 70% ethanol at -20°C overnight. Fixation was carried out by adding 70% ethanol drop by drop, while the cells were being vortexed at a low speed.The fixed samples were brought to room temperature, pelleted down at 2000 rpm for 3 min and washed twice with PBS. Cells were stained with PI solution containing 0.1% Triton X-100, 0.2 mg RNase and 20μg propidium iodide and incubated at 37ºC for 30 min in the dark. Samples were analyzed by flow cytometry (FACS ARIA, BD). Data was analyzed usingFACS DIVA (BD) and FlowJo (FLOWJO, LLC) softwares to identify different stages of the cell cycle

Cell cycle analysis by PI staining

Cells were plated at a density of 30,000 cells per well in triplicates in a 24-well plate. After 24 h, cells at a confluency of 30-40%, were treated with different genotoxic agents such as hydroxyurea (0.5 mM), neocarzinostatin (0.25 μg/mL) and mitomycin-C (1 μg/mL) for 12 h. Spent media containing drug was removed and cells were washed gently twice with PBS. Cells were then incubated for different lengths of time ranging from 24 h to 120 h, in fresh complete DMEMto allow them to recover from genotoxic stress. At each time point cell survival was analyzed by MTT assay as described in 2.2.1. Cell survival was expressed as a fold increase in cell population relative to cells treated with drug for 12 h

DNA damage and recovery assay

cells convert MTT to insoluble purple formazan dye crystals which can besolubilized using detergent or DMSO and measured by colorimetry. At each time point mediacontaining MTT dye (250 μg/mL) was added to each well and incubated at 37ºC. After 2 h cells were lysed with 200 μL DMSO for 15 min on a rocker at room temperature to solubilize the formazan and absorbance was monitored at 570 nm using the EnSpire multimode plate reader (PerkinElmer). Doubling time was determined by plotting log [A570] vstime and conducting a linear regression analysis using GraphPad Prism 5

Cells were seeded in 24 well plates at 10% confluence in triplicates and allowed to grow for different lengths of time. Spent medium was replaced with fresh medium every 48 h. Cells were incubated for different lengths of time ranging from 24 h to 120 h, to allow them to grow and cell survival was monitored by the MTT assay. Metabolically active

Cell proliferation assay

Starbucks delivered solid net revenue growth of 14% to $6.0 billion in its second quarter of fiscal 2018. This was primarily driven by incremental revenues from the ownership change in East China, incremental revenues from 2,103 net new Starbucks® store openings over the last 12 months and global comparable store sales growth of 2%

Item 7:     Management’s Discussion and Analysis of Financial Condition and Results of Operations

ITEM 7—

The information required by this item is incorporated herein by reference to “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of Seaboard’s Annual Report to Stockholders and attached as Exhibit 13 to this report.

MANAGEMENT'S DISCUSSION AND ANALYSIS

ITEM 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANACIAL CONDITION AND RESULTS OF OPERATIONS Information in response to this Item 7 can be found in the 2017 Annual Report to Stockholders under “Financial Review.” That information is incorporated into this item by reference.

We generated total company revenue of $5.7 billion during the first quarter of 2018, a 34% increase from the $4.3 billion of revenue generated during the first quarter of 2017.

Our revenue has grown from $17.7 million during the year ended December 31, 2004 to $741.1 million during the year ended December 31, 2015.

Because of the diversity in our businesses, we present our financial statements in a three-column format, which allows investors to see our industrial operations separately from our Financial Services operations.

Contact Dr. Durana