12 Matching Annotations
  1. Jul 2025
    1. reply to u/HomosexualTypewriter at https://old.reddit.com/r/typewriters/comments/1m5qd7e/how_to_remove_stuckon_felt/

      How to remove stuck-on felt?

      Generally I've dusted the worst off into the trash and then used a mild soap and soft bristle brush to clean the remainder. You won't get 100%, but it's not visible and doesn't affect performance, so I don't worry about remaining residue. You could try light solvents that won't affect the paint too much or attempt some light sanding. Another alternate is to replace the old foam with new felt and you won't see anything.

      I just pulled out my '57 FP that has foam with a black, molasses-like adhesive to hold it on. Goo Gone works incredibly well at removing that adhesive and any residual foam without damaging the paint. I put a small patch of Goo Gone soaked paper towel on top of the adhesive smudge to let it soak for a few minutes and then was able to relatively easily remove all of the adhesive without any issues. A pass or two removed it pretty quickly.

      My later '61 FP has the somewhat more standard industrial felt which was in reasonable condition, so I've left it on and not tested that.

      Honestly, unless it's really thick or cumbersome and you're replacing it with felt, simply gluing over the original is probably your bet course of action.

    1. Not clean enough. There is only one solution, you take the body panels off and clean it. The keys here need cleaned with a 50/50 mix Simple Green and water. The comb area gets cleaned and blown out with mineral spirits. The basket gets cleaned, carefully, with lacquer thinner. If the insulation is really bad, you take it out and glue in new. I like EVA foam. But I will wash the insulation with SG and water and rinse it in the sink and then let dry and retest if it is in good condition otherwise. Case insides can tolerate some water if you don't like soak it. I use a pet spray, scrub it fast, rinse and get it dried off fast Then out in the sun or a fan blowing on it. Once it is dry, if it still smells, I take a few paper towels, spray Glade air freshener in them, set it in a tin foil pan and into the case. Then out in the sun closed up. That will kill most anything.

      u/jbhusker's cleaning out a typewriter

  2. Jul 2024
  3. Apr 2024
    1. https://www.reddit.com/r/typewriters/comments/1caofcz/how_to_get_my_silentsuper_to_not_rotate_to_the/

      Because of aging, the rubber feet of many typewriters can harden thereby reducing their friction against the table on which they sit. As a result, this can cause one's typewriter to "walk" across the table as they type for extended periods necessitating their recentering from time to time. To remedy this, one could use custom made typewriter mats with rubber bottoms to prevent this walking as well as to protect the table underneath. Other options which may also work are either wool or felt pads from fabric stores or from Chinese/Japanese calligraphy stationers. In Japanese these mats are called shitajiki.

  4. Nov 2022
  5. May 2022
    1. "I didn't fully understand it at the time, but throughout my time as a freshman at Boston College I've realized that I have the power to alter myself for the better and broaden my perspective on life. For most of my high school experience, I was holding to antiquated thoughts that had an impact on the majority of my daily interactions. Throughout my life, growing up as a single child has affected the way am in social interactions. This was evident in high school class discussions, as I did not yet have the confidence to be talkative and participate even up until the spring term of my senior year."

  6. Dec 2020
  7. Mar 2020