10,000 Matching Annotations
- Jul 2021
-
stackoverflow.com stackoverflow.com
-
whereas now, they know that user@domain.com was subscribed to xyz.net at some point and is unsubscribing. Information is gold. Replace user@domain with abcd@senate and xyz.net with warezxxx.net and you've got tabloid gold.
-
-
www.techradar.com www.techradar.com
-
While Microsoft is entirely in the right by reminding people of the terms they agreed to, many users are taking issue with the fact that they hadn’t been warned about the limit in the eight years it’s been in place, and many people are now being told they are over the limit after years of being over.
-
-
www.forbes.com www.forbes.com
-
password reset on another account which goes into Hotmail and is then read and stolen by the hackers who gain control of that other account.
-
-
-
developer.mozilla.org developer.mozilla.org
-
-
Sending body/payload in a GET request may cause some existing implementations to reject the request — while not prohibited by the specification, the semantics are undefined. It is better to just avoid sending payloads in GET requests.
-
Requests using GET should only be used to request data (they shouldn't include data).
-
-
wordtothewise.com wordtothewise.com
-
So long as the filters are only using GET requests to pull down links, there’s nothing fundamentally wrong with them. It’s a basic (though oft-ignored) tenet of web development that GET requests should be idempotent; that is, they shouldn’t somehow change anything important on the server. That’s what POST is for. A lot of people ignore this for convenience’s sake, but this is just one way that you can get bitten. Anyone remember the Google Web Accelerator that came out a while ago, then promptly disappeared? It’d pre-fetch links on a page to speed up things if you clicked them later on. And if one of those links happened to delete something from a blog, or log you out… well, then you begin to see why GET shouldn’t change things. So yes, the perfect solution to this is a 2-step unsubscribe link: the first step takes to you a page with a form on it, and that form then POSTs something back that finalizes the unsubscribe request.
-
Two step unsubscribe, where the link in the email goes to a webpage with a prominent “click here to unsubscribe” button is often a good thing for unsubscription. It also gives people an option to not unsubscribe, when they click on the wrong link, or hit “return” with the wrong link focused, in a mail inadvertently, which isn’t that unusual in link-laden emails.
-
Idempotent just means that following a link twice has exactly the same effect on persistent state as clicking it once. It does not mean that following the link must not change state, just that after following it once, following it again must not change state further. There are good reasons to avoid GET requests for changing state, but that’s not what idempotent means.
https://hyp.is/JTNJ6uaLEeuFtzvtkXWaeA/developer.mozilla.org/en-US/docs/Glossary/Safe/HTTP confirms this claim and states it even more clearly.
-
-
security.stackexchange.com security.stackexchange.com
-
Arguably any link that performs such an action via GET is fundamentally broken. A proper unsubscribe should direct to a page with a form that requires a POST submission. (Of course, in the real world, few things are proper.)
-
Assuming that people trust your site, abusing redirections like this can help avoid spam filters or other automated filtering on forums/comment forms/etc. by appearing to link to pages on your site. Very few people will click on a link to https://evilphishingsite.example.com, but they might click on https://catphotos.example.com?redirect=https://evilphishingsite.example.com, especially if it was formatted as https://catphotos.example.com to hide the redirection from casual inspection - even if you look in the status bar while hovering over that, it starts with a reasonable looking string.
-
-
softwareengineering.stackexchange.com softwareengineering.stackexchange.com
-
This is not advice. A GET is defined in this way in the HTTP protocol. It is supposed to be idempotent and safe.
-
-
-
developer.mozilla.org developer.mozilla.org
-
An HTTP method is safe if it doesn't alter the state of the server. In other words, a method is safe if it leads to a read-only operation.
-
All safe methods are also idempotent, but not all idempotent methods are safe. For example, PUT and DELETE are both idempotent but unsafe.
-
-
developer.mozilla.org developer.mozilla.org
-
Each of them implements a different semantic, but some common features are shared by a group of them: e.g. a request method can be safe, idempotent, or cacheable.
Which ones are in each group?
Never mind. The answer is in the pages that are being linked to.
-
request method can be safe, idempotent, or cacheable.
-
-
-
stackoverflow.com stackoverflow.com
-
I don't like that I can't really use head? to know it's a HEAD request, but I (think I) understand the reasoning
-
-
docs.gitlab.com docs.gitlab.com
-
docs.gitlab.com docs.gitlab.com
-
Testing at GitLab is a first class citizen, not an afterthought. It’s important we consider the design of our tests as we do the design of our features.
-
-
-
test-prof.evilmartians.io test-prof.evilmartians.ioTestProf3
-
That's it! Just replace let! with let_it_be. That's equal to the before_all approach but requires less refactoring.
-
That technique works pretty good but requires us to use instance variables and define everything at once. Thus it's not easy to refactor existing tests which use let/let! instead.
-
-
-
www.kickstarter.com www.kickstarter.com
-
developer.mozilla.org developer.mozilla.org
-
(Not a Boolean attribute!)
-
-
stackoverflow.com stackoverflow.com
-
A big gotcha needs to be mentioned: When testing transaction, you need to turn off transactional_fixtures. This is because the test framework (e.g Rspec) wraps the test case in transaction block. The after_commit is never called because nothing is really committed. Expecting rollback inside transaction doesn't work either even if you use :requires_new => true. Instead, transaction gets rolled back after the test runs.
-
-
blog.logrocket.com blog.logrocket.com
-
-
urql stays true to server data and doesn’t provide functions to manage local state like Apollo Client does. In my opinion, this is perfectly fine as full-on libraries to manage local state in React are becoming less needed. Mixing server-side state and local state seems ideal at first (one place for all states) but can lead to problems when you need to figure out which data is fresh versus which is stale and when to update it.
-
Looking deeper, you can see a large amount of issues open, bugs taking months to fix, and pull requests never seem to be merged from outside contributors. Apollo seems unfocused on building the great client package the community wants.
-
This sort of behaviour indicates to me that Apollo is using open-source merely for marketing and not to make their product better. The company wants you to get familiar with Apollo Client and then buy into their products, not truly open-source software in my opinion. This is one of the negatives of the open-core business model.
-
This “bloat,” along with recently seeing how mismanaged the open-source community is, finally broke the camel’s back for me. I realized that I needed to look elsewhere for a GraphQL client library.
-
Sometimes libraries can be too opinionated and offer too much “magic”. I’ve been using Apollo Client for quite some time and have become frustrated with its caching and local state mechanisms.
-
Because GraphQL is an opinionated API spec where both the server and client buy into a schema format and querying format. Based on this, they can provide multiple advanced features, such as utilities for caching data, auto-generation of React Hooks based on operations, and optimistic mutations.
-
-
stackoverflow.com stackoverflow.com
-
github.com github.com
-
this happens with getClient and setClient because it is a svelte context which is only available at component initialization (construction) and cannot be in an event handler.
-
-
unix.stackexchange.com unix.stackexchange.com
-
A better place to ask would be on the new (since 2010) coreutils user mailing list.
-
-
-
askubuntu.com askubuntu.com
-
IMO: alias cp="rsync -avz" cp is outdated
-
-
github.com github.com
Tags
Annotators
URL
-
-
www.toptal.com www.toptal.com
-
In the examples above, the number 42 on the left hand side isn’t a variable that is being assigned. It is a value to check that the same element in that particular index matches that of the right hand side.
-
-
bugs.ruby-lang.org bugs.ruby-lang.org
-
The proposed syntax is much harder to implement than it looks. It conflicts with Hash literals. As a result, humans can be confused as well.
harder than it looks
-
You'll note that it doesn't give the possibility to map the key to a different variable. Indeed, I don't think that it would be useful and I would rather encourage rubyists to use meaningful option and variable names
.
-
-
medium.com medium.com
-
It’s fun but when would we ever use things like this in actual code?When it’s well tested, commented, documented, and becomes an understood idiom of your code base.We focus so much on black magic and avoiding it that we rarely have a chance to enjoy any of the benefits. When used responsibly and when necessary, it gives a lot of power and expressiveness.
-
-
-
stackoverflow.com stackoverflow.com
-
trainingsupport.microsoft.com trainingsupport.microsoft.com
-
If your inquiry was not fully resolved, please post a new question so we may continue in assisting you. This case will now be closed and locked.
-
-
github.com github.com
-
Sure, the slow way is always "good enough" — until you learn a better way of doing things. By your logic, then, we shouldn't have the option of including "Move to" in our context menus either — because any move operation could be performed using the cut and paste operations instead? The method you proposed is 6-7 steps long, with step 4 being the most onerous when you're in a hurry: Select files "Cut" "Create New Folder" Think of a name for the new folder. Manually type in that name, without any help from the tool. (We can't even use copy and paste to copy some part of one of the file names, for example, because the clipboard buffer is already being used for the file selection.) Press Enter Press Enter again to enter the new folder (or use "Paste Into Folder") "Paste" The method that Nautilus (and apparently Mac's Finder) provides (which I and others love) is much more efficient, especially because it makes step 4 above optional by providing a default name based on the selection, coming in at 4-5 steps (would be 3 steps if we could assign a keyboard shortcut to this command like Mac apparently has ): Select files Bring up context menu (a direct shortcut key would make this even sweeter) Choose "New Folder With Selection" Either accept the default name or choose a different name (optional) Press Enter Assuming "Sort folders before files" option is unchecked, you can continue working/sorting in this outer folder, right where you left off: Can you see how this method might be preferable when you have a folder with 100s or 1000s of files you want to organize it into subfolders? Especially when there is already a common filename prefix (such as a date) that you can use to group related files together. And since Nemo kindly allows us to choose which commands to include in our context menu, those who don't use/like this workflow are free to exclude it from their menus... Having more than one way to accomplish something isn't necessarily a bad thing.
-
Has the Linux Mint team decided whether it might please add this sorely missed feature? I'm keeping Nautilus around in addition to Nemo just for this one feature. This feature is so much more efficient than other methods when you have a giant folder of many files and want to organize it into subfolders (which you can then easily move or rename afterwards — but at least this helps with the first step, which is to get the correct files into a folder together). P.S. This was also requested in #560.
-
-
-
nokogiri.org nokogiri.org
-
Lazy == Efficient, so no judgements. :)
-
-
stackoverflow.com stackoverflow.com
-
Wow, Aaron himself just answered it!
-
answered Oct 12 '09 at 18:28
-
-
askubuntu.com askubuntu.com
-
Cheers, I never do random PPA's but just thought there was one from who-ever made Nemo
-
There is no such thing as a "correct PPA". PPA is a personal package archive created by some user. You install software from PPA's at your own risk.
"correct"
-
-
www.kickstarter.com www.kickstarter.comMömmen1
Tags
Annotators
URL
-
-
steamcommunity.com steamcommunity.com
-
I mean, that's what a review is generally.
-
-
store.steampowered.com store.steampowered.com
-
WARNING: I suspect FAKE or "purchased" positive reviews as there is at least one "positive" review that already shows almost 100 hours of game time.. and well this game is nothing but a mess of cobbled together assets off of the Unreal asset marketplace
-
-
store.steampowered.com store.steampowered.com
-
just another coppy of a game witch allredy exist on steam, you just need to find it
Tags
Annotators
URL
-
-
www.kickstarter.com www.kickstarter.com
-
ORANGE SWAN uses brand-new mechanics that offer the right balance between historical flavor, ease of play, and replay value.
-
-
math.stackexchange.com math.stackexchange.com
-
One can also use sophisticated statistic software, such as RRR (free, but not that easy to use, overkill).
-
-
about.gitlab.com about.gitlab.com
-
Known Limitations
-
Epics can contain both issues and epics as children
-
-
about.gitlab.com about.gitlab.com
-
-
Transition teams from Mailchimp to Marketo
-
-
www.hardwoodflooringtalk.com www.hardwoodflooringtalk.com
-
Have your wife stand on the handles of a bakers rolling pin, while you push and pull her around!
make-shift
-
-
support.fanatical.com support.fanatical.com
-
If the screen doesn't progress from "Activating...", either try in another web browser or try in the current browser after clearing cookies then contact with us if the issue persists.
.
-
-
boardgamegeek.com boardgamegeek.com
-
This new edition is based on an exhaustive two-year study by the Designer of the records that have come to light since the fall of the Berlin Wall. The game combines highly accurate information on the forces the Warsaw Pact actually had with now de-classified reports from the CIA and the Defense Intelligence Agency regarding what satellite surveillance and HUMINT revealed about their actual plans.
-
-
www.kickstarter.com www.kickstarter.com
-
A board game that explores what If the Soviets attacked first in 1941?
-
-
-
Closed issues are locked after 30 days of inactivity. This helps our team focus on active issues. If you have found a problem that seems similar to this, please open a new issue.
Tags
Annotators
URL
-
-
www.kickstarter.com www.kickstarter.com
-
I will not be using BackerKit or GameFound or another third party pledge taker. I will just be using Kickstarter. I have found that some people have trouble with third party software.
Okay... What kind of trouble?
-
This Kickstarter was made to be run during WellyCon, New Zealand's board game convention (which carefully and successfully hosted the world's biggest live board game con in 2020!)
-
-
www.reddit.com www.reddit.com
-
Hello, maksimets: code blocks using triple backticks (```) don't work on all versions of Reddit!Some users see this / this instead.
-
-
formidable.com formidable.com
-
This cache has a small trade-off! If we request a list of data, and the API returns an empty list, then the cache won't be able to see the __typename of said list and invalidate it.
That's one big caveat!
-
-
stackoverflow.com stackoverflow.com
-
In 2.8 you can use conditional types to achieve a similar effect
-
type CReturn<C, K extends keyof C> = C extends Array<any> ? C[number] : C[K];
-
Prior to 2.9 keyof only returned string indexes, in 2.9 this will include numeric and symbol keys.
-
const test = new Person(TestPerson).at("name").at("name")
-
-
stackoverflow.com stackoverflow.com
-
type FooType = { // interfaces or classes of course also possible bar: string; } type BarType = FooType['bar']; // BarType is a string now
-
You would get a return value of the type "string" | "number" | "boolean" | "symbol" | "undefined" | "object" | "function", because you're using the JavaScript typeof operator at runtime, which returns a string like "object", not the compile-time type seen by TypeScript.
-
-
stackoverflow.com stackoverflow.com
-
You can use this format to get the member type: type InputType = typeof input[number];
-
-
-
(This, incidentally, is why the current 'zero-config' marketing fad is such nonsense: it really means 'abdicate the responsibility for config'. Instead of a single place where you can view all the build config in a structured, coherent form, you have the exact same amount of config but scattered around your project in lots of annoying files that are harder to understand.)
-
-
graphql-code-generator.com graphql-code-generator.com
-
if you're using near-operation-file preset
-
-
medium.com medium.com
-
Bash is a wonderful and terrible language. It can provide extremely elegant solutions to common text processing and system management tasks, but it can also drag you into the depths of convoluted workarounds to accomplish menial jobs.
-
- Jun 2021
-
stackoverflow.com stackoverflow.com
-
if x.strip('%').isnumeric(): return float(x.strip('%'))/100
-
.isnumeric() matches 430 Unicode codepoints in the BMP that float() won't accept, and there are codepoints that .isdigit() returns true for that are also not convertible.
-
-
stackoverflow.com stackoverflow.com
-
This is especially nice for opening Vim from other tools, as this call can be done on the command-line: "+call cursor($LINE,$COLUMN)"
-
Be aware, for general usage, that this is screen column, not real column. This means that <Tab> characters will get different results. If these characters will be there, you will instead want |30lh or |29l or 029l or something like that.
-
@DavidPope: note that in this case "screen columns" means that it's still relative to the start of the line. g0 achieves "start of current screen line".
-
The vim documentation is hilarious: "Ceci n'est pas une pipe" :-)
-
-
gist.github.com gist.github.com
-
-
git diff-index --name-status --relative --cached @ might be a bit easier to parse (and only includes staged files so you don't have to do an extra step to filter them). Also, I couldn't use git status --porcelain because my Rails app is in a sub-folder so I needed the list of files to be relative to the Rails root instead of relative to the git repo root (although git status in general seems to respect the --relative option, git status --porcelain seems to not).
-
-
blog.viktoradam.net blog.viktoradam.net
-
Note that you could skip the https:// if you want a shorter command and you’re feeling adventurous with your HTTP MITM concerns, plus you can use the direct GitHub link as well if you don’t trust my redirect pointing there.
-
-
We also get a hook to alter commit messages so that they include a common suffix. We can then use this to set up a server-side hook that refuses changes that don’t have this in their messages.
-
This compatibility simply means that you can have a .githooks folder at the root of your project, where you can organize your individual hooks into folders.
-
-
stackoverflow.com stackoverflow.com
-
https://github.com/rycus86/githooks is a really option for managing hooks It is... safe (it uses an opt-in model, where it will ask for confirmation whether new or changed scripts should be run or not (or disabled)) configurable handles a lot of the details for you lets you keep your hooks nicely organized. For example:
-
-
And from a security standpoint, that'd be really kind of scary - no one should have the ability to force me to execute certain scripts whenever I run certain git commands
-
Luckily there is not a way to force hooks to people upon clone. If there was, you could write a post-receive hook with rm -rf / in it and wipe people's hard disk on pull
-
-
github.com github.com
-
If you want, you can try out what the script would do first, without changing anything. $ sh -c "$(curl -fsSL https://r.viktoradam.net/githooks)" -- --dry-run
-
To try and make things a little bit more secure, Githooks checks if any new hooks were added we haven't run before, or if any of the existing ones have changed
-
git diff --cached --diff-filter=ACMR --name-only
-
-
www.client9.com www.client9.com
-
github.com github.com
Tags
Annotators
URL
-
-
github.com github.com
-
gitree works very similarly to tree but only lists files related to the current git repository.
-
-
What?
-
-
github.com github.com
-
gist.github.com gist.github.com
-
I'm using this to run against staged files only
Tags
Annotators
URL
-
-
github.com github.com
-
but note that the value will be nil when using the attributes_for strategy.
-
-
github.com github.com
-
Apologies for digging up a closed thread, but it already contains some monorepo examples so feels like the best place to do it.
-
-
whatthe.fi whatthe.fi
-
These days, Monorepo’s and Typescript are very popular, but configuring the development environment to work with both is still a fairly complex task.
-
-
github.com github.com
-
problem: low-resolution sourcemaps
interesting wording: "low-res" here
-
Ok I'll reopen until the culprit is found
-
-
sass-lang.com sass-lang.com
-
Today, Sass uses complex heuristics to figure out whether a / should be treated as division or a separator. Even then, as a separator it just produces an unquoted string that’s difficult to inspect from within Sass.
-
-
Sass currently treats / as a division operation in some contexts and a separator in others. This makes it difficult for Sass users to tell what any given / will mean, and makes it hard to work with new CSS features that use / as a separator.
-
-
-
Of course, I don't doubt your report and of course, I want this to work. Before I invest a lot of effort again into supporting Node.js's exotic "support" for ESM, though: would you mind trying whether upgrading to Node.js 14.17 solves the problem for you?
Tags
Annotators
URL
-
-
shareup.app shareup.app
-
Another important thing to remember is: don’t run npm install inside a sub-project. npm isn’t smart enough to figure out it’s inside a workspace and will assume it’s a normal project, create a local node_modules directory inside the sub-project, etc. I hope this changes soon and npm can detect the root package.json and perform the install up at the root.
.
-
1) all dependencies of the root package + sub-packages are installed into a single node_modules folder at the root and 2) sub-packages are symlinked into node_modules during npm install.
-
We’ve broken our project up into three different types of packages: apps which are preact apps intended to be bundled and deployed somewhere, modules which are plain npm packages for node/browsers and do not bundle their dependencies, and workers which are either Worker or ServiceWorker scripts entirely bundled up with no imports or exports. We don’t have to keep these three types of packages separated, but it helps us navigate around.
-
-
ruanmartinelli.com ruanmartinelli.com
-
But if you're working on a bigger project, with multiple packages and a complex dependency tree, you might want to combine npm with a tool like Lerna.
-
Yarn has stated before that the goal of Yarn Workspaces is to provide low-level primitives for tools such as Lerna to use, not to compete with them.
-
Yarn is constantly cited as prior art in the RFCs. I would be surprised to see big disparities between both CLIs.
-
You can run all the "test" scripts at once by adding the --workspaces (plural) to your npm run command: # Run "test" script on all packages npm run test --workspaces # Tip - this also works: npm run test -ws
-
Your packages (the ones you created)
-
Dependencies are hoisted, meaning they get installed in the root node_modules folder. This is done for performance reasons: if a dependency is shared by multiple packages, it gets saved only once in the root.
-
Other package managers such as Yarn and pnmp already ship with Workspaces for quite a while now.
-
In fact, npm is not trying to reinvent the wheel. You can find similarities between all three Workspace implementations.
Tags
- prior art
- using the right tool for the job
- important qualification
- not:
- pnpm
- yarn
- waste of disk space
- npm workspaces
- building blocks / primitives
- how to choose a dependency/library/framework
- stated goals
- clarification
- reuse/leverage existing _ when possible
- don't reinvent the wheel
- important distinction
- convenient
Annotators
URL
-
-
docs.npmjs.com docs.npmjs.com
-
This demonstrates how the nature of node_modules resolution allows for workspaces to enable a portable workflow for requiring each workspace in such a way that is also easy to publish these nested workspaces to be consumed elsewhere.
Tags
Annotators
URL
-
-
docs.npmjs.com docs.npmjs.com
-
Please make sure that your file(s) referenced in bin starts with #!/usr/bin/env node, otherwise the scripts are started without the node executable!
-
-
digitalnow878391108.wordpress.com digitalnow878391108.wordpress.com
-
Monorepo use cases
-
Apart from that it’s just more convenient to have all your source files opened in a single IDE instance. You can jump from project to project without switching windows on your desktop.
-
Why is it big news? Because the main advantage of npm over other package managers like yarn or pnpm is that it comes bundled with NodeJS.
-
-
stackoverflow.com stackoverflow.com
-
-
I've copied his response here as this question ranks very high in web search results.
-
A really good question. Sad to realise that there is no feature equivalent for package.json to what we have in Gemfiles.
-
-
docs.npmjs.com docs.npmjs.com
-
npm install <folder>: Install the package in the directory as a symlink in the current project. Its dependencies will be installed before it's linked. If <folder> sits inside the root of your project, its dependencies may be hoisted to the top-level node_modules as they would for other types of dependencies.
-
-
stackoverflow.com stackoverflow.com
-
The local package will be copied to the prefix (./node-modules).
Yay for linking to relevant PR!
-
-
-
www.viget.com www.viget.com
-
-
The answer for me is @whitecolor's yalc.
-
But this solution has technical complications, and the npm and the yarn implimentations give people trouble (as of this writing there are about 40 open npm link issues and over 150 open yarn link issues). If you have tried to use symlinked dependencies while developing a package you've probably run into into a stumbling block, whether simply an unexpected unlink behavior, trouble with peer dependencies, or something bigger.
-
-
github.com github.com
-
-
Use with Yarn/Pnpm workspaces
-
-
material.io material.ioLists3
-
Selected state should be applied on the .mdc-list-item when it is likely to frequently change due to user choice. E.g., selecting one or more photos to share in Google Photos.Activated state is more permanent than selected state, and will NOT change soon relative to the lifetime of the page. Common examples are navigation components such as the list within a navigation drawer.
-
In Material Design, the selected and activated states apply in different, mutually-exclusive situations:
-
Do not use aria-orientation attribute for standard list (i.e., role="list"), use component's vertical property to set the orientation to vertical.
-
-
github.com github.com
-
(write-only)
-
-
www.merriam-webster.com www.merriam-webster.com
-
When dealing with the verb, the issue of how to treat the past participle is a contentious one, with much blood being shed on both sides. Some people feel that the past participle of input should be input, not inputted, based on the reasoning that the word comes from put, and we don’t say “he putted the papers on the shelf.” A similar line of reasoning has caused many people to aver that words such as broadcast should never be written as broadcasted, since the cast portion of the word remains unchanged with tense.
-
-
jpetazzo.github.io jpetazzo.github.io
-
but we think that it’s simpler, as well as easier to write and to maintain, to go with the single actor model of Docker.
-
-
dockerquestions.com dockerquestions.com
-
Docker returns: Client sent an HTTP request to an HTTPS server.
-
-
github.com github.com
-
Please keep in mind that the GitHub issue tracker is not intended as a general support forum, but for reporting bugs and feature requests.
-
-
-
Integrated access to the pdb debugger and the Python profiler.
Tags
Annotators
URL
-
-
stackoverflow.com stackoverflow.com
-
${0%/*} removes everything including and after the last / in the filename ${0##*/} removes everything before and including the last / in the filename
-
-
mywiki.wooledge.org mywiki.wooledge.org
-
Since looping over the positional parameters is such a common thing to do in scripts, for arg defaults to for arg in "$@". The double-quoted "$@" is special magic that causes each parameter to be used as a single word (or a single loop iteration). It's what you should be using at least 99% of the time.
-
Bash (like all Bourne shells) has a special syntax for referring to the list of positional parameters one at a time, and $* isn't it. Neither is $@. Both of those expand to the list of words in your script's parameters, not to each parameter as a separate word.
-
-
superuser.com superuser.com
-
Instead of using a for loop, which will fail on spaces unless you redefine the IFS variable, I would recommend using a while loop combined with find.
-
mmv1,2 is also a very nice tool for such a task, applied to the current job, it would be mmv '*.md' 'test - #1.md'
-
-
unix.stackexchange.com unix.stackexchange.com
-
In case writing to tmpfile fails for some reason, use && mv ... instead of ; mv ... -- that will keep $file from being overwritten with "bad" content.
-
-
-
stackoverflow.com stackoverflow.com
-
Different ways to prepend a line: (echo 'line to prepend';cat file)|sponge file sed -i '1iline to prepend' file # GNU sed -i '' $'1i\\\nline to prepend\n' file # BSD printf %s\\n 0a 'line to prepend' . w|ed -s file perl -pi -e 'print"line to prepend\n"if$.==1' file
-
-
devhints.io devhints.io
-
-
stackoverflow.com stackoverflow.com
-
From pretty format documentation: '%w([<w>[,<i1>[,<i2>]]])': switch line wrapping, like the -w option of git-shortlog[1]. And from shortlog: -w[<width>[,<indent1>[,<indent2>]]] Linewrap the output by wrapping each line at width. The first line of each entry is indented by indent1 spaces, and the second and subsequent lines are indented by indent2 spaces. width, indent1, and indent2 default to 76, 6 and 9 respectively. If width is 0 (zero) then indent the lines of the output without wrapping them.
-
-
-
Although h.265 was released almost 5 years ago, adoption is slow. The primary reason for this, is that unlike h.264 which has 1 patent pool, h.265 has 3 patent pools with different pricing structures and terms & conditions. The second patent pool (HEVC Advance) was introduced in 2015, 3 years after the launch. This unclarity about the royalties situation around h.265 was hindering the adoption and as a result primary browsers have no support at all (e.g. Chrome, Firefox) or only partial support (Edge). Due to this, many content providers have stuck with h.264 because at least they know it will always play.
patents
-
-
www.quora.com www.quora.com
-
Sort of. There are several systems around that have varying degrees of freedom. I have used Ivideon, which works fairly well as a docker-based environment, although it really needs its paid cloud back end to work well, and looked as Shinobi. If you are prepared to train your system, which can take some time, Shinobi is probably the best bet.
-
-
shinobi.video shinobi.video
-
-
"I am a huge fan of open source and am writing code myself. However Zoneminder is a mess. Been trying to use it for like 10 years. But it never worked reliably. More than 3 cameras almost always made it fail. RTSP never worked reliably. Shinobi took me minutes to set up on my mini PC and is feeling so reliable already. Reinventing the wheel may be bad. But let's face it: Zoneminder is doomed. The horse is dead. Let's get off."
.
-
I would suggest Shinobi as a NVR
Tags
Annotators
URL
-
-
selfhosted.show selfhosted.show
-
-
www.amazon.com www.amazon.com
-
100% customer satisfaction service, value for your money, any questions, do contact us for help! We are always here to help you out.
.
-
-
www.amazon.com www.amazon.com
-
It is NOT an alarm, but it does alert you!
What's the difference?
-
always bring a few when staying in hotels or Airbnb’s and such. Can be removed with ease and be installed within a minute or 2
.
-
-
www.amazon.com www.amazon.com
-
But after using it for a few days you quickly realize that there is one major privacy issue that has been installed consciously by Amazon and Ring.The ring app allows you to delete videos on the system but it does Not allow you to delete motion sensor and window sensor history.So Amazon/ring knows everything that happens inside your home and there is no way for you to delete that history. They know when you’re inside, they know when you open your door, they know when you closed it. etc. etc. etc. So they essentially know everything about you and your motions within your home.This is a major privacy issue. And it is not some mistake that was overlooked. This was a conscious choice on Amazon/rings part to track the motions of you and your family inside your own home.I spoke with the customer service rep from Ring and she admitted that many many people call up and complain that they can’t delete sensor history. Of course it would’ve been much more ethical to explain to potential customers BEFORE they buy ring products that this breach of privacy has been installed.But Amazon/ring does not warn their customers about this privacy breach. They don’t warn customers because they created the privacy breech and Will continue to have an always have very personal information on the motions of your family inside your own home.If you care about your privacy. Don’t buy Ring products.
-
Why bother? Well, you never know if some crook has a device that can hack into your garage door opener!
.
-
-
www.amazon.com www.amazon.com
-
What finally led me to write this review was that I recently received an offer containing 2 $20.00 gift cards to write a 5 star review. I wonder now if I had been duped by the reviews I read
-
I do not advise. I still do not understand where there are so many good reviews for this product. This vacuum cleaner is literally bursting at the seams.
-
Soliciting five star reviews earns a one star.
-
-
www.amazon.com www.amazon.com
-
I bought this mostly because of the outstanding reviews which now I question greatly and may never trust another review again.
-
-
stackoverflow.com stackoverflow.com
-
for cpp_file in *.cpp; do gcc -c $$cpp_file & done; wait This gives much finer control than make -j.
-
Note that & is a line terminator like ; (write command& not command&;).
-
-
There is one very important reason for enabling job control to be useful inside scripts: the side-effect it has of placing background processes in their own process groups. This makes it much, much easier to send signels to them and their children with one simple command: kill -<signal> -$pgid. All other ways of dealing with signaling entire trees of processes either involve elaborate (sometimes even recursive) functions, which are often bugnests, or risk killing the parent in the process (no pun intended).
-
You particular circumstances may or may not warrant a way different from what lhunath (and other users) deem "best practices".
-
Remember that in the end, especially in scripting, there always are more than one way to skin a cat, but some ways are more portable, more reliable, make it simpler to handle error cases, parse the output, etc.
Tags
- appropriate use case
- shell scripting: killing/managing child processes
- easy to get wrong
- more than one right way (no one right/best way)
- which is better depends on which criteria you use to judge
- unintuitive
- use case
- shell scripting
- command line: job control
- best practices
- shell scripting: job control
- depends on whom you ask
- surprising behavior
- Linux: process groups
Annotators
URL
-
-
-
-
Provides a template for future specific classes
-
Abstract classes offer default functionality for the subclasses.
-
-
english.stackexchange.com english.stackexchange.com
-
-
I hate mentee. The word is protégé.
-