LibKey Nomad is a browser extension that delivers full-text scholarly content faster than typical library resource pathways. Nomad is free to install, and unaffiliated researchers can use it with selected open access content, but it works best for users who are affiliated with an institution that subscribes to scholarly content and the LibKey package. It is an excellent resource for many types of institutions that support research, including colleges, universities, hospitals, governments, and corporations.

For researchers whose online searching often starts outside the library, LibKey Nomad provides a handy shortcut to full-text content

Just minimum access

Democracy Docket is the leading digital news platform dedicated to information, analysis and opinion about voting rights and elections in the courts.

There is a fruitful argument for the cost of these more “traditional” publishing houses, as they spend a good amount of time with editing, formatting, and distribution (often in paper form)

Unpaid Labor

how do we sort of cultivate an 00:40:56 intuition for complex systems right for those second third nth order effects

Continued access to data is dependent upon the ability of the repository to provide services over time, and to respond with new or improved services to meet evolving user community requirements

Students are increasinglydemanding access to learninganytime, anywhere

Adults do not perceive accessibility of reading materials in appropriate languages as a primary barrier to reading with children. Only 5% of adults who do not read with children said it wasbecause they did not have materials in the right languages (most said it was a lack of time). On the other hand, 79% of adults also report that they would read more with children if theycould access more materials in their preferred languages. This suggests that adults who are strongly motivated to read with children will do so, irrespective of materials access, but thatincreasing accessibility to reading materials in the right languages may increase the quality and amount of reading.71Figure 49

The digital revolution is transforming not only how we communicate (faster,at much larger volumes, to a large extent through text rather than voice),but how we read more broadly.Digital and online materials can be produced faster, versioned (e.g. intodifferent languages), and distributed more cheaply than print materials.Materials can also be shared (rather than read by one person at a time),interacted with (through annotations, comments, reviews, interactivediscussions, embedded dictionaries, etc.), archived and searched moreeasily. Furthermore, much of what we read today in digital formats is writtenby other ‘normal people’ like ourselves (social media posts, messages, blogs,etc.) rather than professional authors mediated by a commercial publishingindustry. All of these factors ‘democratise’ reading and open up access.On the other hand, there are concerns about the quality of digital reading -both in terms of the quality of the content being read and the quality of thereading experience itself, i.e. the depth with which the reader engages withwhat they are reading. Various studies have shown that digital reading bystudents is not as good for learning as reading the same content on paper(Lang 2021).Since Covid-19, debates about the spread of digital materials for teaching andlearning in the schooling system have also accelerated. The NRS cannot commenton school-based reading pedagogy or materials, but similar questions are oftenposed about the wider reading ecosystem. When the project consulted stakeholdersabout key questions they wanted answered, concerns about digital reading, readingon smart phones and possible trade-offs between social media use and book readingwere prominent. So was curiosity about how digital reading is reshaping readingculture generally, and what opportunities it might provide.In response to these questions, the NRS included questions about social media use,digital device use for reading, and adult perceptions about digital reading by theirchildren.One of the NRS’ innovations is to include ‘reading for communication’ as a ‘readingpurpose’ and therefore to include the reading of (mostly) digital messages as a formof reading. As reported in Chapter 2, when analysed in relation to other forms ofreading, such as reading for information and reading for enjoyment, reading tocommunicate appears to augment rather than replaces these forms of reading.

We have, as a bedrock value in our society, long agreed on thevalue of open access to information, and recognize the problems thatarise with attempts to restrict access to and development of knowledge.

ZK II note 9/8b 9/8b On the general structure of memories, see Ashby 1967, p. 103 . It is then important that you do not have to rely on a huge number of point-by-point accesses , but rather that you can rely on relationships between notes, i.e. references , that make more available at once than you would with a search impulse or with one thought - has fixation in mind.

Instance methods Instances of Models are documents. Documents have many of their own built-in instance methods. We may also define our own custom document instance methods. // define a schema const animalSchema = new Schema({ name: String, type: String }, { // Assign a function to the "methods" object of our animalSchema through schema options. // By following this approach, there is no need to create a separate TS type to define the type of the instance functions. methods: { findSimilarTypes(cb) { return mongoose.model('Animal').find({ type: this.type }, cb); } } }); // Or, assign a function to the "methods" object of our animalSchema animalSchema.methods.findSimilarTypes = function(cb) { return mongoose.model('Animal').find({ type: this.type }, cb); }; Now all of our animal instances have a findSimilarTypes method available to them. const Animal = mongoose.model('Animal', animalSchema); const dog = new Animal({ type: 'dog' }); dog.findSimilarTypes((err, dogs) => { console.log(dogs); // woof }); Overwriting a default mongoose document method may lead to unpredictable results. See this for more details. The example above uses the Schema.methods object directly to save an instance method. You can also use the Schema.method() helper as described here. Do not declare methods using ES6 arrow functions (=>). Arrow functions explicitly prevent binding this, so your method will not have access to the document and the above examples will not work.

for security, app access token should never be hard-coded into client-side code, doing so would give everyone who loaded your webpage or decompiled your app full access to your app secret, and therefore the ability to modify your app. This implies that most of the time, you will be using app access tokens only in server to server calls.

once you have an access token you can use it to make calls from a mobile client, a web browser, or from your server to Facebook's servers. If a token is obtained on a client, you can ship that token down to your server and use it in server-to-server calls. If a token is obtained via a server call, you can also ship that token up to a client and then make the calls from the client.

A User access token is used if your app takes actions in real time, based on input from the user. This kind of access token is needed any time the app calls an API to read, modify or write a specific person's Facebook data on their behalf. A User access tokens is generally obtained via a login dialog and requires a person to permit your app to obtain one.

In many cases, all or some of an author'sworks included in this set were unavailable.

Are protected members/fields really that bad? No. They are way, way worse. As soon as a member is more accessible than private, you are making guarantees to other classes about how that member will behave. Since a field is totally uncontrolled, putting it "out in the wild" opens your class and classes that inherit from or interact with your class to higher bug risk. There is no way to know when a field changes, no way to control who or what changes it. If now, or at some point in the future, any of your code ever depends on a field some certain value, you now have to add validity checks and fallback logic in case it's not the expected value - every place you use it. That's a huge amount of wasted effort when you could've just made it a damn property instead ;) The best way to share information with deriving classes is the read-only property: protected object MyProperty { get; } If you absolutely have to make it read/write, don't. If you really, really have to make it read-write, rethink your design. If you still need it to be read-write, apologize to your colleagues and don't do it again :) A lot of developers believe - and will tell you - that this is overly strict. And it's true that you can get by just fine without being this strict. But taking this approach will help you go from just getting by to remarkably robust software. You'll spend far less time fixing bugs.

Public and/or protected fields are bad because they can be manipulated from outside the declaring class without validation; thus they can be said to break the encapsulation principle of object oriented programming.

Using a property or a method to access the field enables you to maintain encapsulation, and fulfill the contract of the declaring class.

Exposing properties gives you a way to hide the implementation. It also allows you to change the implementation without changing the code that uses it (e.g. if you decide to change the way data are stored in the class)

Given the broad aim of the right of access, the aim of the right of access is notsuitable to be analysed as a precondition for the exercise of the right of accessby the controller as part of its assessment of access requests. Thus, controllersshould not assess “why” the data subject is requesting access, but only “what”the data subject is requesting (see section 3 on the analysis of the request) andwhether they hold personal data relating to that individual (see section 4).Therefore, for example, the controller should not deny access on the groundsor the suspicion that the requested data could be used by the data subject todefend themselves in court in the event of a dismissal or a commercial disputewith the controller9.

Where information that a controller would otherwise be required to provide to a datasubject pursuant to subsection (1) includes personal data relating to another individualthat would reveal, or would be capable of revealing, the identity of the individual, thecontroller—(a)shall not, subject to subsection (8), provide the data subject with the informationthat constitutes such personal data relating to the other individual, and(b)shall provide the data subject with a summary of the personal data concernedthat—(i)in so far as is possible, permits the data subject to exercise his or her rightsunder this Part, and

Subsection (1) shall not apply—(a)in respect of personal data relating to the data subject that consists of anexpression of opinion about the data subject by another person given inconfidence or on the understanding that it would be treated as confidential, or(b)to information specified in paragraph (b)(i)(III)of that subsection in so far as arecipient referred to therein is a public authority which may receive data in thecontext of a particular inquiry in accordance with the law of the State.

If you close the report without explicitly clearing the filters, Access remembers them and you can click Toggle Filter again to reapply them next time you open the report. This works even if you close and reopen the database. However, if you click Home > Advanced > Clear All Filters, Access clears the filters completely and you’ll need to start from scratch next time around.

Searching is the #1 task that a user has to do. I will say this again:Searching is the #1 task that a user has to do.

In the example(s), Mypass is a SQL pass-through query you created. You simply create one working PT query, and then you can (usually) then use that one PT query anytime you want raw T-SQL or to run a store procedure 100% server side. So we are in effect overwriting and re-using that one PT query anytime we want raw SQL to run server side.

Now for running and executing store procedures, or say a sql update to “many” rows, then you most certainly want to use a pass through query, since processing of records does occur local client side.

And AGAIN a SIMPLE USE of the “where” clause will result in sql server view ONLY sending down records that meet the criteria you set via the Access built in “where” clause.

So placing forms! Expressions inside of a query always been a bad idea since then the query is now “married” to some silly form.

You can change the SQL string in the pass-through QueryDef and specify the Form field:

Second, would be to pass a SQL string from Access to SQL Server (pass-through query) and have it execute on the SQL Server side.

You can make these changes 100% inside of Access, and not have to really use anything SQL server side to achieve this goal.

WhereCondition Optional Variant A string expression that's a valid SQL WHERE clause without the word WHERE.

Essentially, sorting and filtering are tools that let you organize your data. When you sort data, you are putting it in order. Filtering data lets you hide unimportant data and focus only on the data you're interested in.

In 2022, a global digital trends report revealed that the number of people who are not connected to the internet dropped below 3 billion for the first time.

But that’s just one way to get batteries into low-income customers’ homes. Sunrun also acts as a third-party owner of solar and battery systems that Grid Alternatives installs for customers that can’t or don’t want to borrow money to finance it. Third-party owners can monetize the value of federal tax credits for low-income households that don’t pay a large enough federal tax bill to take advantage of the credits themselves. 

Participants will get zero-interest loans to finance the equipment and installation costs, plus monthly credits in exchange for allowing MCE to tap that equipment to reduce its need to buy high-priced energy during the peak hours of 4 p.m. to 9 p.m. The program is open to households that currently lack rooftop solar as well as households that have already had solar installed by Grid Alternatives and want to take advantage of that self-generated power to heat their homes or charge their cars, said Alexandra McGee, MCE’s manager of strategic initiatives.

Any MSU Libraries public service desk

Clinical characteristics and diagnostic clues in inborn errors of creatine metabolism

Benefits and drawbacks of guanidinoacetic acid as a possible treatment to replenish cerebral creatine in AGAT deficiency

En cas de non-respect de la Loi, la Commission d’accès à l’information pourra imposer des sanctionsimportantes, qui pourraient s’élever jusqu’à 25 M$ ou à 4 % du chiffre d’affaires mondial. Cette sanctionsera proportionnelle, notamment, à la gravité du manquement et à la capacité de payer de l’entreprise.ENTREPRISES

can understand and download from the internet

We are the leading independent Open Access publisher in the Humanities and Social Sciences in the UK: a not-for-profit Social Enterprise run by scholars who are committed to making high-quality research freely available to readers around the world. All our books are available to read online and download for free, with no Book Processing Charges (BPCs) for authors. We publish monographs and textbooks in all areas, offering the academic excellence of a traditional press combined with the speed, convenience and accessibility of digital publishing. We also publish bespoke Series for Universities and Research Centers and invite libraries to support Open Access publishing by joining our Membership Programme.

Hypothesis can now offer social annotation in more places for more students — adding over 16 million VitalSource users in more than 240 countries — across a vast new quantity of content: over a million texts from over a thousand publishers available in the Bookshelf platform.

trust in neighbours, access to care, opportunities for creative expression, recognition

A complaint more specific to the quantity of books was articulated in 1522 by the jurist Giovanni Nevizzano of Asti (d. 1540) who observed that the great number of available books made it hard to find the books one needed. Proper selection among the many books available was crucial because “if a scholar does not have the books required for his subject, he does not enjoy the privi-leges of a scholar.”20

Of two editions that I have been involved with, Volume One of The Collected Works of John Ford now costs £222.50, while Volume One of The Oxford Francis Bacon sells at £322.50. These prices have increased since publication in 2012 at rates exceeding any measure of inflation, and have reached a level that no individual, and ever fewer libraries, can afford. They are so expensive that fewer copies are being sent out for review, which means that fewer readers will hear about them. The claim that “Oxford University Press advances knowledge and learning” is undermined by its policy on pricing. Editors who devote years of their lives to producing accurate and helpful texts are disappointed that their chances of reaching a scholarly audience are diminishing.

student advocates are pushing back in the court of public opinion. Inclusiveaccess.org is a new website that counters the publishers' disinformation campaign and advocates for a fair deal on textbooks. https://www.inclusiveaccess.org/

easy access to digi-tools.

Modern browsers that support the File System Access API (Edge and Chrome today) allow web pages to access the local file system (with your permission).

If you would like to use Google's cloud to store and sync your Chrome data but you don't want Google to access the data, you can encrypt your synced Chrome data with your own sync passphrase.

Peers can help you go from No Open Access to some Open Access.

Just as normalizing the use of pronouns has been an important step for supporting gender justice, we argue that normalizing access talk is an important step for advancing disability justice in STEM fields. Moreover, we argue that all individuals have access needs, regardless of whether they are disabled or nondisabled.

Remote Access is something that we are really excited about because it will allow our support team to give you a seamless and high level of support that is truly unmatched. When you need extra help, you can enable the Remote Access toggle with a single click. This will send a secure token to the Elegant Themes support staff that they can use to log in to your WordPress Dashboard. No passwords are shared and there is no need to send the token to our team yourself. It all works seamlessly in the background. While remote access is enabled, our team will be able to log in to your website and help explore whatever problems you are experiencing. You can even enable it preemptively before chatting with our support team so that we can jump right in if necessary. By default, our support staff will have limited access to your website using a custom WordPress support role. You can also enable full admin access if requested. Remote access is automatically disabled after 4 days, or when you disable Divi. You can also turn it off manually after an issue has been resolved, and of course, Remote Access can only be enabled by you, the website owner, and not by Elegant Themes or anyone else. The Remote Access system is wonderful because it saves tons of time during support chat, and it saves you the hassle of having to debug certain complicated issues yourself. It allows us to take a hands on approach to solving problems quickly, instead of wasting hours or days chatting back and forth.

Blogging about your work hits both of those marks. It also means that you have to translate your work from academese to language that non-academics will understand (i.e. jargon) and also foreground the relevance of your work. You have to tell people why your work is important and what it adds to the world.

For attributes, methods and constructors, you can use the one of the following:

When defining accessors in Ruby, there can be a tension between brevity (which we all love) and best practice.

in languages (like JavaScript and Java) where external objects do have direct access to instance vars

Setting an instance variable by going through a setter is good practice, and using two access modifiers is the way to accomplish that for a read-only instance variable